User manual hardware manual casablanca s series s-2000 / s-4000 / s-4100
The following products carry the ce seal of conformity on the basis of the guidelines 89/336/ewg of the commission of the european community from 29. April 1991 for the alignment of legal regulations in the signatory states concerning communications devices, including mutual recognition of their con...
Location environment • make sure that the machine is operated at a location temperature of 10 to 35° centigrade. • the location must be dry. Air humidity must not be more than 80% and must not be condensing. •make sure that there is sufficient circulation of the air in order to prevent thermal build...
Notes and connections important information on connecting your systems: 1. Before connecting your system, please make absolutely sure that you first disconnect all the aerial/cable-tv or satellite reception cables from the television set, from the video recorder and from the set-top box. 2. Next, co...
Connecting your device is equipped with the following connections: (1) power connection here you connect the machine to the power line (220-240 v in most parts of europe, 115 v in north america). Connect the supplied power cable to the power plug on the rear side of the machine and then connect the ...
H i j (16) s-video out (yc) you can connect vcr (hi8, svhs, or minidv) to this port to output to tape once your project is com- pleted. If your video recorder supports a yc (s-vi- deo) signal, then you should use this as your output, because yc (s-video) is superior to cvbs (rca). (17) esata this co...
Stand: 31.03.2009 © 2009 macrosystem digital video ag.
