1 english ( o rigina l in st ruct ions) instruction manual important: read before using. Cordless driver drill mt070 mt071 011794.
2 english (original instructions) specifications model mt070 mt071 steel 10 mm 13 mm wood 25 mm 36 mm wood screw 5.1 x 63 mm 6 mm x 75 mm capacities machine screw 6 mm high (2) 0 - 1,400 no load speed (min -1 ) low (1) 0 - 400 overall length 201 mm 223 mm net weight 1.4 kg 1.7 kg rated voltage d.C. ...
3 a cord suitable for outdoor use reduces the risk of electric shock. 9. If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (gfci) protected supply. Use of an gfci reduces the risk of electric shock. Personal safety 10. Stay alert, watch what you are ...
4 geb051-2 cordless drill safety warnings 1. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. 2. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contact...
5 functional description caution: • always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1 2 3 011795 • always switch off the tool before installing or removing of the battery car...
6 speed change 1 011799 to change the speed, first switch off the tool and then slide the speed change lever to the "2" side for high speed or "1" side for low speed. Be sure that the speed change lever is set to the correct position before operation. Use the right speed for your job. Caution: • alw...
7 caution: • make sure that the driver bit is inserted straight in the screw head, or the screw and/or bit may be damaged. Note: • when driving wood screws, predrill pilot holes to make driving easier and to prevent splitting of the workpiece. See the chart. Nominal diameter of wood screw (mm) recom...
8 makita corporation www.Makita.Com 884990-3.
