MadgeTech RFC1000-CE Product User Manual - Rfc1000-Ce
RFC1000-CE
3
Configuring the Channel Settings of the RFC1000-CE wireless transceiver
•
Unplug the RFC1000-CE.
•
Use a Phillips head screwdriver to unscrew the enclosure.
•
Find the dip switches located on the front of the PCB circuit board.
•
Change the dip switches to match the desired channel using the diagram
above.
•
Screw the enclosure back together and reconnect the RFC1000-CE.
The default wireless channel for MadgeTech wireless devices is channel 25.
Different wireless channels may be used to create multiple networks in one area,
or to avoid wireless interference from other devices. The images below show the
orientations avaliable of the switches for each channel. Channel 26 (all switches
in the up position) is not supported.
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
CH 17
CH 25
CH 18
CH 26
NOT SUPPORTED
DEFAULT CHANNEL