MadJax 13-A07 Installation Instructions

Page of 2

Download

Bookmark us

Mini Amp Kit

13-A07/13-A08

installation instructions

included:

tools needed:

Revised April 2015

Mini Amp

Speakers

Wired Input

Blue tooth Input

Mini Amp

Speakers

Wired Input

Blue tooth Input

Phillips Screw Driver

Wire Stripper

Crimp Tool

Make sure your cart’s TOW/RUN switch is in the tow position.

Locate where you would like to mount your mini amp.

Note: Do not mount in battery box if you are using the blue

tooth Receiver

Madjax recommends professional installation. If you choose to not have this product installed

by a professional, we highly recommend that you exercise caution, care, and patience when

installing this product.

Run your wires for your power source and ground to the amp.

Note: We recommend using a MJ1612VR or MJ1230C

converter to insure a clean 12V input.

Page 1
Mini amp kit 13-a07/13-a08 installation instructions included: tools needed: revised april 2015 mini amp speakers wired input blue tooth input mini amp speakers wired input blue tooth input phillips screw driver wire stripper crimp tool make sure your cart’s tow/run switch is in the tow position. Lo...
Page 2
(wired input) locate where you would like your input will be located. Drill a 7/8” hole to mount wired input connector as shown. (blue tooth) you will need to pair your devise with the blue tooth receiver. Turn on your devise and search for the signal. Once your devise has found the blue tooth recei...