Mp8 crt installation hi-rez projections inc. 20 main st. Ashland, ma 01721 508-881-1613 www.Hometheater1.Com.
Table of contents mp8 crt installation table of contents overview...................................................................................................1 precautions...............................................................................................1 components...................
Mp8 crt installation page 1 overview this procedure will allow a qualified madrigal imaging dealer to install a crt into a mp8. Please read and understand all instructions outlined in this procedure before attempting the installation. Should you have questions about this procedure please contact the...
Mp8 crt installation page 2 cautions before beginning caution! Hazardous voltages available inside unit. Before proceeding, remove ac cable from ac outlet. Caution! Static sensitive parts and subassemblies inside unit. Observe proper grounding procedures before continuing. Warning! Be careful when h...
Mp8 crt installation page 3 procedure to be performed by qualified service personnel only! Unpacking new crt assembly 1. Carefully unpack the crt service assembly and inspect for shipping damage. 2. Compare the defective component with the replacement part to ensure the correct part was ordered. Car...
Mp8 crt installation page 4 5. Carefully lift the entire defective crt assembly (includes bulkhead, lens, plastic covers and vnb) out of the projector. 6. Carefully remove the vnb from the neck of the crt and white plastic shielding. 7. Remove the defective crt from the bulkhead by undoing the four ...
Mp8 crt installation page 5 supplemental information alignment of yoke rotation (if needed) notes: x-ray levels are extremely low, however when alighning the yoke the beam limit current should be kept low (contrast do not touch the windings or terminals of the deflection yoke. Contact with the windi...
10/2000 rev 1.0 document # mi10400 wb-pn / fb-dw.
