Madrigal Audio Proceed Manual - page 14
14
4
AES/EBU DIGITAL INPUT
This input accepts digital audio conforming to the 110
Ω
AES/EBU digital
interface standard (via a cable equipped with XLR-type connectors) from
the digital output of a digital FM tuner, compact disc player, laserdisc
player, or digital audio recorder.
The pin assignments of these AES/EBU XLR-type female input connec-
tors are:
2 1
3
Pin 1: Shield
Pin 2: Digital + (non-inverting)
Pin 3: Digital – (inverting)
Connector ground lug: chassis ground
These pin assignments are consistent with the standards adopted by the
Audio Engineering Society and the European Broadcast Union. Refer to
the operating manuals of your digital sources to verify that the pin as-
signments of their output connectors correspond to the DAP. If not, wire
the cables so that the appropriate output pin connects to the equivalent
input pin.
Connect the AES/EBU output of your digital source component to the
AES/EBU (XLR) input of the DAP using a high quality 110
Ω
cable such
as Madrigal MDC-1.
5
BNC DIGITAL INPUT
This input accepts digital audio conforming to the 75
Ω
S/PDIF digital in-
terface standard (via a cable equipped with BNC-type connectors) from
the digital output of a digital FM tuner, compact disc player, laserdisc
player, or digital audio recorder.
Connect the digital output of your digital source component to the BNC
input of the DAP using a high quality 75
Ω
cable such as Madrigal
MDC-2.
6
SPDIF (RCA) DIGITAL INPUT
This input accepts digital audio conforming to the 75
Ω
S/PDIF digital in-
terface standard (via a cable equipped with RCA-type connectors) from
the digital output of a digital FM tuner, compact disc player, laserdisc
player, or digital audio recorder.
Connect the digital output of your digital source component to the RCA
input of the DAP using a high quality 75
Ω
cable such as Madrigal
MDC-2.
7
EIAJ DIGITAL INPUT
This input accepts digital audio conforming to the EIAJ optical (some-
times called “Toslink”) digital interface standard from the EIAJ digital out-
put of a digital FM tuner, compact disc player, laserdisc player, or digital
audio recorder.
Connect the digital output of your digital source component to the EIAJ
input of the DAP using a high quality EIAJ optical cable.