Maestro 100 3G Quick Start Manual & User Manual - page 12
Dimensions:
– Overall size: 74.3 mm x 60 mm x 21.7 mm (2.47 in x 2.36 in x 0.86 in)
– Weight: 90 g (0.2 lb)
Temperature range:
– Operating: -40 °C to +85 °C with relative humidity below 95%
– Storage: -40 °C to +85 °C
Hazardous Location:
– In some states and provinces, The Maestro 100 3G is classified to ANSI/ISA 12.12.01-2013 and CSA C22.2
No 213- M(1987)(R2013) and are suitable for use in Class 1, Division 2, Groups A, B, C and D with ambient
temperature range -30°C ≤TAMB ≤+70°C classified Hazardous Locations.
CAUTION
In accordance with the European directive EN60590, if the ambient temperature exceeds or might exceed 65°C, it
is required that the installer:
- Avoid physical contact with the Maestro 100 3G when the temperature exceeds 65°C.
- Adds a marking on the assembly indicating that this part is hot (for example showing the “symbol IEC 60417-5041:
Caution, hot surface”; and/or having a wording similar to “CAUTION - HOT SURFACE - DO NOT TOUCH”).
CAUTION
The following warnings and instructions apply:
– Warning: EXPLOSION HAZARD–SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR
CLASS I, DIVISION 2.
– Avertissement: RISQUE D’EXPLOSION-LA SUBSTITUTION DE COMPOSANTS PEUT RENDRE CE MA-
TERIEL INACCEPTABLE POUR LES EMPLACEMENTS DE CLASSE I, DIVISION 2.
– Warning: EXPLOSION HAZARD–DO NOT DISCONNECT WHILE CIRCUIT IS LIVE UNLESS THE AREA IS
KNOWN TO BE NON-HAZARDOUS.
– Avertissement: RISQUE D’EXPLOSION-NE PAS DEBRANCHER TANT QUE LE CIRCUIT EST SOUS TEN-
SION, A MOINS QU’IL NE S’AGISSE D’UN EMPLACEMENT NON DANGEREUX.
– Warning: DO NOT USE THE USB CONNECTOR IN A HAZARDOUS AREA.
– Avertissement: NE PAS UTILISER LE CONNECTEUR USB DANS LES ENVIRONNEMENTS DANGEREUX.
– Warning: DO NOT REMOVE OR REPLACE WHILE CIRCUIT IS LIVE UNLESS THE AREA IS KNOWN TO
BE FREE OF IGNITIBLE CONCENTRATIONS OF FLAMMABLE SUBSTANCES.
Failure to follow these instructions will result in death or serious injury.
CE Statement
– CE Notice:
• The CE Mark applies to products regulated by certain European health, safety and environmental protec-
tion legislation. The CE Mark is obligatory for products it applies to:the manufacturer affixes the marking
in order to be allowed to sell his product in the European market.
– Hereby, M&F Technologies Limited declares that the radio equipment type M1003GXT02 modem is in com-
pliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address: http://update.maestro-wireless.com/red-directive/
12
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd.
Please contact us on support.maestro-wireless.com