Maestro 3500 User Manual
Maestro 3500 User Guide
Personalizing Your Phone
The Maestro 3500 gives you eight (8) options that let you personalize your phone.
Below the display is a sliding panel. Move the sliding panel to the right and press the OPTIONS
key to see each of the eight (8) choices. You can change any of the eight options by following
the change procedure below.
To change any of the eight options, follow these steps:
1. Don’t pick up the receiver or press the [Speaker/Mute] key.
2. Slide the panel located below the display to the right and press the OPTIONS key.
3. Press either Review or Review
to move through the list of feature options or press
the desired option number on the dial pad. (For example, when 8 items in list
appears on the display, press [2] to set the time and date.)
4. Press the selected option number again ( [1] through [8] ) and follow the instructions on
the display to make a change.
Note: To exit at any time press [Goodbye].
Options
1. Change the Language
You have the choice of display messages in one of two languages.
2. Set Time and Date
If you subscribe to Caller ID, the time and date are automatically set for you when the
first call comes in. You can also set the time and date yourself if you do not want the time
and date automatically updated. If there is a power failure you may have to reset the time
and date or wait for an incoming call.
3. Set the Ring Tone
You can choose one of three different ring tones. Use [Save] to end only when you are
satisfied with your chosen ring tone. If an incoming call is private (I.e., caller had
blocked their name and number from appearing on your display), the call will ring with a
fourth distinctive tone.
4. Timer ON/OFF
The Maestro 3500 comes with an autotimer option to track the length of your calls. The
display will show you, in minutes and seconds, the elapsed time of an individual call.
5. Set Contrast
Choose from 8 contrast levels to suit your needs. Once you’ve chosen set contrast in the
OPTIONS list, simply press
or
until you are satisfied with the display.