Lite ext windows 98 gprs connection setup guide rev. 00
Confidential, the whole present document is the sole property of maestro wireless solution ltd revision history rev. Date details originated by 00 22 feb 2007 first release wallace lee maestro 100 is a registered trademark of maestro wireless solution ltd. This manual is written without any warranty...
- 1 - contents 1. Introduction 2 2. Configurating maestro 100 2 3. Adding a modem to windows 98 2 4. Making a dial-up netowrking 4 5. Trouble shooting 9.
- 2 - 1. Introduction this document describes how to use maestro 100 and a pc with windows 98 to make a gprs internet dial-up. 1.1 setup requirement the following items are necessary for the setup: - maestro 100 / ext /lite with pc cable and power supply (maestro 100 eco not supported) - pc with win...
- 3 - 3.3 if your system have no modem installed it will show the ‘ install new modem ’ dialogue box, otherwise it will show ‘ modem properties ’ (see) you can then press ‘add’ button 3.4 on ‘ install new modem ’ dialogue box, click ‘ don’t detect my modem ’. Then press ‘ next ’ 3.5 choose ‘ standar...
- 4 - 3.5 now the modem has been installed. You can press ‘ ok ’ 4. Making a dial-up netoworking 4.1 on windows 98, go to ‘ accessories ’ Æ ‘ communication ’ Æ ‘ dial-up networking ’ 4.2 double click ‘ make a new connection ’ 4.3 type the name of the dial-up profile as you want 4.4 choose the ‘ 1920...
- 5 - 4.5 choose the ‘ maximum speed ’ to ‘ 115200 ’ 4.6 click ‘ connection ’ tab 4.7 press ‘ advanced ’ button 4.8 on ‘ extra settings ’, type the apn information here. (consult your network operator for the correct apn settings) common setting is : +cgdcont=1,”ip”,”internet” 4.9 use hardware flow ...
- 6 - 4.10 on the ‘ telephone number ’ type ‘ *99**1# ’. Then press ‘ next ’ 4.11 press ‘ finish ’ and you have made a gprs dial-up profile. However you need to edit some more settings. 4.12 right-click the just-made gprs dial- up icon. Then choose ‘ properties ’.
- 7 - 4.13 uncheck the ‘ use area code ’ option 4.14 press ‘ server types ’ tab 4.15 uncheck all options except ‘ tcp/ip ’ option 4.16 press the ‘ tcp/ip settings ’ button.
- 8 - 4.17 uncheck the ‘ use ip header compression ’ option 4.18 then close all dialog boxes by pressing ‘ ok ’s. Now you have finished the setup of gprs dun. 4.19 now you can make a gprs dial-up by double-click the gprs icon. Remember to leave user name and password blank on connection (or refer to...
- 9 - 5. Trouble shooting problem action dial-up networking reports modem is not responding check if the modem is ready, led is flashing slowly check the serial port setting of maestro and windows modem device check connection cable check if the modem is used by another program dial-up not successfu...
