Wifi setup please note that this setup is only needed if you are not connected to your receiver with a network cable! To connect your mag receiver to wifi, you need a usb wifi adapter which can be purchased separately. For this setup you will need the keyboard button (kb) to enter text. Step 1: go t...
Using the system programme guide - epg when the system is booted, you get a message on the screen that says loading ... After a while tvonip will load the system. To view the programme guide, press the epg button, and you will get the following picture on the screen: after a few seconds, the receive...
Catch-up - mag
Epg to get to the epg, press the epg button. Pressing the same button brings you back to the channel you watched last. Information the info button displays information about the programme you are watching. On most channels you will see a description, channel and start and end time. Navigating the me...
Troubleshooting troubleshooting - mag
Image freezes if the image freezes, you can try to manually change the buffer size of your mag box. 1. Press the setup- or set button on your remote. 2. Select “advanced settings” and press ok. 3. Navigate down to “buffer size (ms)”. 4. Use left/right key to change the “buffer size (ms)”. 5. Press o...
