- DL manuals
- Magenta
- Receiver
- MultiView II DVI-Rx-1K
- Installation And User Manual
Magenta MultiView II DVI-Rx-1K Installation And User Manual
Summary of MultiView II DVI-Rx-1K
Page 1
Multiview ii dvi-rx-1k receiver installation and user guide version 1.00 2791 circleport drive, erlanger, ky 41018, usa. Americas: 859-282-7303 emea: +44 (0) 1843 873322 email: tech.Usa@tvone.Com www.Tvone.Com tm.
Page 2
Manual copyright notice this document and the magenta research products to which it relates, and the copyright in each, is the intellectual property of tvone, ©2014. Neither the document nor the products may be reproduced by any means, in whole or in part, without the express prior written permissio...
Page 3
Regulatory compliance statements federal communications commission and industry canada radio frequency interference statements this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This devi...
Page 4: Precautions
Precautions precautions safety instructions ● english this symbol calls attention to important information. This symbol alerts the user of important maintenance (or servicing) and operating information. This symbol alerts the user to the presence of un-insulated dangerous voltages or other condition...
Page 5: Table Of Contents
Precautions table of contents page chapter 1 specifications ............................................................................................................................. 1 chapter 2 about this manual .......................................................................................
Page 6: Chapter 1
Specifications multiview™ ii dvi-rx-1k installation and user guide 1 chapter 1 specifications the following table lists the general specifications of the mvii-dvi-rx-1k. Table 1: mvii-dvi-rx-1k general specifications item description compatible transmitter the mvii-dvi-rx-1k receiver must be used wi...
Page 7: Chapter 2
About this manual multiview™ ii dvi-rx-1k installation and user guide 2 chapter 2 about this manual this manual descr ibes the magenta multiview™ ii dvi-rx-1k receiver, and contains the following information: specifications(chapter 1) product overview (chapter 3) twisted-pair cable compatibility (ch...
Page 8: Chapter 3
Product overview multiview™ ii dvi-rx-1k installation and user guide 3 chapter 3 product overview the mvii-dvi-rx-1k is a video receiver that is compatible with the mvii-dvi-tx transmitter, and many legacy multiview products – contact technical support with compatibility questions. It extends an ana...
Page 9
Product overview multiview™ ii dvi-rx-1k installation and user guide 4 3.2 rear panel interfaces the rear panel of the mvii-dvi-rx-1k has the following ports: db9 serial port (optional, on sap model only) video output to display utp (link) output port figure 2: mvii-dvi-rx-1k rear panel interfaces d...
Page 10: Chapter 4
Twisted-pair cable compatibility multiview™ ii dvi-rx-1k installation and user guide 5 chapter 4 twisted-pair cable compatibility the dvi-rx-1k receiver is compatible with twisted- pair “ftp” type cable. This type of cable ensures best possible product performance, and maintains emc compliance for e...
Page 11: Chapter 5
Installation multiview™ ii dvi-rx-1k installation and user guide 6 chapter 5 installation this section describes the following installation topics: data mode configuration prerequisites to installation installation procedure post-installation adjustments post-installation configuration settings this...
Page 12
Installation multiview™ ii dvi-rx-1k installation and user guide 7 to install a multiview-ii dvi-tx transmitter: 1. Connect the source video to the magenta multiview ™ dvi-tx transmitter’s video input port, which is a dvi-d connector labeled dvi-in. 2. If desired, attach a local monitor to the dvi-d...
Page 13
Installation multiview™ ii dvi-rx-1k installation and user guide 8 to install the mvii-dvi-rx-1k receiver: 1. Connect the dvi out connector to the display. 2. Connect any audio and/or serial cables to the (aux i/o) and (ioio) connectors, depending on the specific model of receiver you are installing...
Page 14
Installation multiview™ ii dvi-rx-1k installation and user guide 9 5.4 adjustments this section describes how to make the following adjustments: cable distance (eq) compensation skew compensation note that the factory-default behavior of the mvii-dvi-rx-1k is “auto-adjust mode enabled” for the eq an...
Page 15
Installation multiview™ ii dvi-rx-1k installation and user guide 10 5.6 skew compensation settings the akucomp-ii skew module is already included inside the standard mvii-dvi-rx-1k receiver. It is possible to quickly adjust the rgb skew-compensation values when the receiver is operating in normal mo...
Page 16
Installation multiview™ ii dvi-rx-1k installation and user guide 11 5.7 configuration settings there are a number of configurable operating parameters, and the factory-default settings should work for most applications. However, some applications might require slight configuration changes. This sect...
Page 17
Installation multiview™ ii dvi-rx-1k installation and user guide 12 5.7.2 4th pair settings (led1-3) the mvii-dvi-rx 1k provides several options for using the 4 th -pair signals (pairs 1-3 are generally used for video). The factory-default settings support analog audio (l+r summed) on the 4 th -pair...
Page 18
Installation multiview™ ii dvi-rx-1k installation and user guide 13 5.7.3 4 th pair termination settings (led4) the mvii-dvi-rx-1k receiver provides settings for 4 th pairtermination: on or off. This setting has an effect only for “-s”, “-a” and s/pdif operating modes. Note: it is not possible to ac...
Page 19: Chapter 6
Troubleshooting multiview™ ii dvi-rx-1k installation and user guide 14 chapter 6 troubleshooting in most cases, nearly every issue with the multiview™ video system can be resolved by checking the twisted- pair cable termination and making sure that it’s pinned to the tia/eia 568b wiring specificatio...
Page 20: Chapter 7
Connector pinouts multiview™ ii dvi-rx-1k installation and user guide 15 chapter 7 connector pinouts dvi-d connector pinout: dvi (digital visual interface) is a robust and popular video interface standard that can include digital and analog options in the same connector (the “dvi-i” version). Howeve...
Page 21
Connector pinouts multiview™ ii dvi-rx-1k installation and user guide 16 auxiliary i/o (aux-i/o) connector pinout table 5: auxiliary i/o (4-pin phoenix) pin usage pin# (a) audio (sap) audio (s) simplex serial spdif audio 1 (sig1) left channel left channel tx signal + 2 (gnd) ground ground ground sig...
Page 22
Connector pinouts multiview™ ii dvi-rx-1k installation and user guide 17 serial port (ioio) connector pinout if the receiver is an -sap version, then the serial interface will be provided on the “ioio” connector. This is a db9-m type serial connector, configured to look like a standard 9- pin “dte” ...
Page 23
Connector pinouts multiview™ ii dvi-rx-1k installation and user guide 18 rj45 (multiview link) wiring standard figure 9: t568b category cable wiring standard table 7: t568b wiring for rj-45 plug pin # color pair 1 white / orange stripe 2 2 orange solid 2 3 white / green stripe 3 4 blue solid 1 5 whi...
Page 24
Connector pinouts multiview™ ii dvi-rx-1k installation and user guide 19 dc power connector magenta provides ready-to- use power supplies for multiview™ ii products. However, if there is a reason a substitute power supply must be used, then the following information is important for maintaining prod...
Page 25
Supported video formats and features multiview™ ii dvi-rx-1k installation and user guide 20 appendix a supported video formats and features the following video formats are supported by the mvii-dvi-tx and mvii-dvi-rx-1k (combined) link. This table represents the contents of the edid information stor...
Page 26
(sap) option module settings multiview™ ii dvi-rx-1k installation and user guide 21 appendix b (sap) option module settings the sap option module allows a bi-directional session to be established between a sap-equipped transmitter (mvii-dvi-tx-sap), and a specific sap-equipped receiver even in a mul...
Page 27
Pollable serial mode address chart multiview™ ii dvi-rx-1k installation and user guide 22 appendix c pollable serial mode address chart addr addr addr addr on 6 on 7 on 6 7 on 1 2 3 4 5 6 7 8 off 1 2 3 4 5 7 8 off 1 2 3 4 5 6 8 off 1 2 3 4 5 8 off 1 on 1 6 on 1 7 on 1 6 7 on 2 3 4 5 6 7 8 off 2 3 4 ...
Page 28
Pollable serial mode address chart multiview™ ii dvi-rx-1k installation and user guide 23 sap addressing chart, cont’d: addr addr addr addr 8 on 6 8 on 7 8 on 6 7 8 on 1 2 3 4 5 6 7 off 1 2 3 4 5 7 off 1 2 3 4 5 6 off 1 2 3 4 5 off 1 8 on 1 6 8 on 1 7 8 on 1 6 7 8 on 2 3 4 5 6 7 off 2 3 4 5 7 off 2 ...
Page 29: Mounting Kits
Mounting kits multiview™ ii dvi-rx-1k installation and user guide 24 appendix d mounting kits the following table shows several kits available for mounting the multiview™ ii dvi-rx-1k receiver. Table 9: mvii-dvi-rx-1k mounting kits mounting kit # description 2211054-01 rigid-mount bracket. This moun...
Page 30
Mounting kits multiview™ ii dvi-rx-1k installation and user guide 25 note: when installing mvii-dvi-rx-1k receivers in an area susceptible to elevated operating temperatures (near the maximum specified operating temperature), it is important to give careful consideration to maintaining adequate air ...
Page 31
Multiview™ ii dvi-rx-1k installation and user guide 26 index about this manual, 2 adjustments, 9 eq setting, 9 skew setting, 10 auxiliary i/o connector, 16 configuration 4 th -pair settings, 12 4 th -pair termination setting, 13 entering configuration mode, 11 factory defaults, 11 settings, 11 conne...
Page 32
Multiview™ ii dvi-rx-1k installation and user guide 27 notes:.
Page 33
Multiview™ ii dvi-rx-1k installation and user guide 28 2791 circleport drive, erlanger, ky 41018, usa. Americas: 859-282-7303 emea: +44 (0) 1843 873322 email: tech.Usa@tvone.Com www.Tvone.Com.