- DL manuals
- Magenta
- Transmitter
- MultiView II T4
- Installation And User Manual
Magenta MultiView II T4 Installation And User Manual
Summary of MultiView II T4
Page 1
Document # 5310188-02 rev-01 (3/22/2012) multiview ii t4 transmitter installation and user guide tm.
Page 2
Multiview™ ii t4 installation and user guide ii © 1998-2012 by magenta research, ltd. All rights reserved. Magenta research, ltd. 128 litchfield road new milford, ct 06776 usa this document and the magenta research ltd. Products to which it relates, and the copyright in each, is the property of mage...
Page 3: Precautions
Precautions multiview™ ii t4 installation and user guide iii precautions safety instructions ● english this symbol calls attention to important information. This symbol is intended to alert the user of important maintenance (servicing) and operating information. This symbol is intended to alert the ...
Page 4: Contact Information
Contact information multiview™ ii t4 installation and user guide iv contact information for sales or technical support, contact your nearest magenta research sales office. Region contact details north, central and south americas: magenta research, ltd. Corporate headquarters 128 litchfield road new ...
Page 5: Table Of Contents
Table of contents multiview™ ii t4 installation and user guide v table of contents page chapter 1 about this manual ...................................................................................................................... 1 chapter 2 product overview .......................................
Page 6: Chapter 1
About this manual multiview™ ii t4 installation and user guide 1 chapter 1 about this manual this manual contains information about the magenta multiview™ ii t4 transmitter (hereafter referred to simply as “t4”). This includes: • product overview (chapter 2). • product specifications (chapter 3). • ...
Page 7: Chapter 2
Product overview multiview™ ii t4 installation and user guide 2 chapter 2 product overview the magenta multiview™ ii t4 transmitter extends an analog video signal over standard cat5 cable (also cat5e and cat6). It accepts analog video (vga, rgb and other analog formats), audio (analog or s/pdif) or ...
Page 8: Chapter 3
Specifications multiview™ ii t4 installation and user guide 3 chapter 3 specifications 3.1 general specifications item description cable required category 5, 5e, 6 cable. Shielded or unshielded twisted pair. Low-skew. Compliance ce, fcc class a, ic class / class a, ul listed i.T.E device, rohs. Vide...
Page 9
Specifications multiview™ ii t4 installation and user guide 4 3.2 ddc/edid support for best compatibility with source devices (ex: a pc), an extension device (t4 in this case) should provide an appropriate ddc/edid profile with the proper resolution and timing information. This helps ensure best com...
Page 10
Specifications multiview™ ii t4 installation and user guide 5 3.3 auxiliary signal support the mvii-t4 design supports three types of auxiliary signals. Two are available pre-configured from the factory. The third option is easily user-selectable from the front-panel buttons. Note that only one type...
Page 11: Chapter 4
Installation multiview™ ii t4 installation and user guide 6 chapter 4 installation cat5/5e/6 cabling for the magenta multiview™ ii series must be pinned to the tia-eia t568b wiring specification. Figure 1 t568b cat5 specification we also highly recommend that all cat5 cables be pre-terminated and te...
Page 12
Installation multiview™ ii t4 installation and user guide 7 4.2 installation procedure all units must be the same type for all supported features to function correctly. For example, a “t4-s” transmitter must be connected to a multiview™ “-s” type receiver for the serial interface to function properl...
Page 13
Installation multiview™ ii t4 installation and user guide 8 at the receiver end (these steps are generic - refer to the appropriate receiver manual): 1. Connect the video output connector to the display, and attach any audio (aux i/o) and/or serial connections depending on the model of multiview™ re...
Page 14
Installation multiview™ ii t4 installation and user guide 9 4.3 configuration the t4 has a number of configurable operating parameters, and the factory-default settings will work in most applications. However, some applications may require configuration changes. Nearly all settings are available fro...
Page 15
Installation multiview™ ii t4 installation and user guide 10 4.3.4 config mode-1: sync-mode options the t4 is factory-configured for auto-detecting the proper sync-mode (replisync-i normal/stretched). This mode is generally compatible with all existing multiview™ receiver products that support repli...
Page 16
Installation multiview™ ii t4 installation and user guide 11 4.3.6 config mode-2: video coupling select ac or dc coupling, and dc-restore functions, to be applied to the input video. (starting in normal-mode) press and release the cfg button twice to access configuration-mode-2. Cfg indicator = flas...
Page 17: Chapter 5
Troubleshooting multiview™ ii t4 installation and user guide 12 chapter 5 troubleshooting in most cases, nearly every issue with the multiview™ ii cat5 video system can be resolved by checking the cat5 termination and making sure that it’s pinned to the tia/eia 568b wiring specification. However, th...
Page 18
Troubleshooting multiview™ ii t4 installation and user guide 13 problem solution notes on daisy chaining when utilizing a receiver’s rj45 daisy chain port, the following rules apply: • if using l/r summed audio, simplex serial, or spdif units, a maximum of 12 units may be daisy changed within the ra...
Page 19: Appendix A
Connector pinouts multiview™ ii t4 installation and user guide 14 appendix a connector pinouts a.1 hd15 connector pinout (source in, local-out) . Multiview tm hd15 video connector signal assignments: pin rgbhv (vga) rgbs rgsb com- posite svhs (y/c) yuv composite video & stereo audio 1 red + red + re...
Page 20
Connector pinouts multiview™ ii t4 installation and user guide 15 a.2 auxiliary i/o (aux-in/aux-out) 4-pin phoenix connector signal assignments: t4 pin# (a) audio (s) simplex serial spdif audio composite video (use s/pdif configuration settings) 1 (sig1) left channel tx signal + signal + 2 (gnd) gro...
Page 21
Connector pinouts multiview™ ii t4 installation and user guide 16 a.3 rj45 (multiview tm link) wiring standard pin # color pair 1 white / orange stripe 2 2 orange solid 2 3 white / green stripe 3 4 blue solid 1 5 white / blue stripe 1 6 green solid 3 7 white / brown stripe 4 8 brown solid 4 typical ...
Page 22
Connector pinouts multiview™ ii t4 installation and user guide 17 a.4 dc power connector magenta provides ready-to-use power supplies for multiview™ ii products. However, if there is a reason a substitute power supply must be used, then the following information is important for maintaining product ...
Page 23: Appendix B
Mounting kits multiview™ ii t4 installation and user guide 18 appendix b mounting kits there are several kits available for mounting the t4 transmitter: mounting kit # description 8310203-02 1u rack-mount plate for standard 19” rack. Mounts 3 devices in a 1u space. Comes with (6) device-mounting scr...
Page 24: Appendix C
System design drawings multiview™ ii t4 installation and user guide 19 appendix c system design drawings the following drawings are available from magenta research as an aid in system design and configuration. You may download them from the magenta website (www.Magenta-research.Com) . There is no ch...
Page 25: Appendix D
Regulatory compliance information multiview™ ii t4 installation and user guide 20 appendix d regulatory compliance information federal communications commission and industry canada radio frequency interference statements this device complies with part 15 of the fcc rules. Operation is subject to the...
Page 26: Appendix E
Spares & options multiview™ ii t4 installation and user guide 21 appendix e spares & options these spares and optional cables are available from magenta research. Magenta p/n description power supplies: 8020069-03 u.S. Domestic power supply for transmitter or receiver, 5v dc (vertical mount). 802007...
Page 27: Index
Index multiview™ ii t4 installation and user guide 22 index about this manual, 1 configuration 4 th -pair modes, 10 ddc mode selection, 9 entering config modes, 9 general, 9 setting factory defaults, 9 sync modes, 10 video coupling, 11 video termination, 11 contact information, iv default settings, ...