Magic Chef MCSF-5585BSS Instruction Manual - Operating Instructions
5
Operating Instructions
About the control on the refrigerator.
The control will look like the one above.
The arrow indicates the setting selected.
Control Settings
The temperature control maintains the temperature in the refrigerator. 1 is the warmest
setting; higher numbers are colder settings with 7 being the coldest setting. The typical
setting is 3.
Allow 24 hours for the refrigerator to reach the desired temperature. If you want a
colder or warmer temperature, move the dial one setting at a time. Moving the control
to O stops cooling but does not turn off the power to the refrigerator. Setting the control
too high may cause freezing in the refrigerator depending on the room temperature.
How To Test Temperatures
Use the milk test. Place a container of milk on a shelf and check it a day later. If the milk is
too warm or too cold, adjust the temperature control. After changing the control, allow
•
This provides the best performance and also prevents overloading house wiring
circuits which could cause a fire hazard from overheated wires.
•
Never unplug your refrigerator by pulling on the power cord. Always grip plug
firmly and pull straight out from the outlet.
•
Repair or replace immediately all power cords that have become frayed or
otherwise damaged. Do not use a cord that shows cracks or abrasion damage
along its length or at either end.
•
When moving the refrigerator away from the wall, be careful not to roll over or
damage the power cord.
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
WARNING!
•
USE OF ADAPTER PLUGS
ADAPTER PLUGS ARE NOT LEGAL IN CANADA.
•
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS