Stainless steel built-in wine cooler with dual temperature zones and touch-screen control panel instruction manual model no.: mcwc44dz to ensure proper use of this appliance and your safety, please read the following instructions completely before operating this appliance..
Table of contents names of the parts……………………………………………………… 2 specifications…………………………………………………………….. 2 important safety instructions……………………………………. 3 installation instructions before using your appliance…………………………..…… 3 free standing installation….………………….…………… 3 built-in installation………..……………………………...
Names of the parts model no.: mcwc44dz 1) interior light 2) dc electric fan 3) zone partition 4) inner rear 5) wine shelf 6) door handle 7) partition gasket 8) tempered glass door (touch-screen control panel is on the front of the glass door.) specifications – model # mcwc44dz product description 44...
Important safety instructions a warning a to reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions: • • • • • • • read all instructions before using the wine cooler. Danger or warning: risk of child entrapment. To avoid the possibility of chil...
Built-in installation the cutout dimension illustrated in figure (a) allows for door swing and access to the pull-out shelves when installed as a built-in appliance. If installing between frameless cabinets, a ½” wide filler strip or side panel may be needed on hinge side. The filler strip will act ...
Appliance features touch-screen control panel • touch-screen control panel is on the front of glass door for convenient temperature reading and setting. You can easily read the zone temperature without opening the door and control your unit just by touching the screen. For details of temperature set...
Operating your appliance temperature control and display 1. The temperatures in upper zone and lower zone can be independently controlled and displayed. 2. The temperature in either zone can be controlled between 39°f to 61°f (4℃ to 16℃). (the zone temperature may have a tolerance of +/-5°f (+/-3℃) ...
Temperature setting • unlock the control panel by pressing the pad for approximately 3 seconds. Once the control panel is unlocked an audible beep will be heard and the indicator will go out. • under normal conditions the temperature display indicates the current temperature of the corresponding zon...
Care and maintenance cleaning your appliance • upon installation of your new appliance, it is recommended that it be cleaned thoroughly. • turn off the appliance first and then unplug the unit from the wall outlet. • remove all contents. • wash the inside with a damp warm cloth soaked in lukewarm wa...
Troubleshooting guide you can solve many common appliance problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling for service. Problem possible cause appliance does not operate. Not plugged in. The circuit breaker ...
Appliance warranty mc appliance corporation warrants each new appliance to be free from defects in material and workmanship and agrees to remedy any such defect or to furnish a new part(s) (at the company’s option) for any part(s) of the unit that has failed during the warranty period. Parts and lab...
