1. DL manuals
  2. Magic Control Technology
  3. Desktop
  4. MWS9940
  5. User Manual

Magic Control Technology MWS9940 User Manual

Manual is about: MULTIPOINT USB OVER LAN Workstation

Summary of MWS9940

  • Page 1

    Multipoint usb over lan workstation mws9940 1 m ulti p oint usb over lan workstation mws9940 mws9940 user manual.

  • Page 2

    Multipoint usb over lan workstation mws9940 2 contents introduction -------------------------------------------------------------3 minimum system requirements---------------------------------4 features---------------------------------------------------------------------5 connections and mounting kit...

  • Page 3: Introduction

    Multipoint usb over lan workstation mws9940 3 introduction 1. Two high-speed usb ports 2. Audio and microphone ports 3. Ac power jack 4. Reset port 5. Vga port 6. Giga lan port package contents • mws9940 • vesa mouting kits • lan cable • 3a/5v ac power adapter • driver cd • uer manual mct’s multipoi...

  • Page 4

    Multipoint usb over lan workstation mws9940 4 minimum system requirements • available gigabit ethernet port or gigabit ethernet extension card. • cpu – one of the following: x64-based intel pentium, intel quad core (i7, i5). • compatible processor (multipoint server supports up to four core & eight ...

  • Page 5: Features

    Multipoint usb over lan workstation mws9940 5 figure 1 10-seat implementation of windows multipoint server2011 with using mws9940 features ethernet connection the host server with distance free simple plug and play setup eliminates the need for internal video card installation designed for microsoft...

  • Page 6

    Multipoint usb over lan workstation mws9940 6 connections and mounting kits power jack – 5v/3a dc in reset function port (recall firmware default) 1 vga port (resolutions up to 1600 x 1200 (1600 x 900 system recommend) 1 gigabit ethernet port stereo audio output (speaker/headphone) and mono audio in...

  • Page 7: Vesa Mounts

    Multipoint usb over lan workstation mws9940 7 monitor mws9940 unit back view 100x100mm vesa holes on monitor vesa mounting vesa mounting 3a d c 5 v r e set vesa mounts follow up the picture illustration below:.

  • Page 8: Operating Systems Supported

    Multipoint usb over lan workstation mws9940 8 operating systems supported for optimal multimedia performance, we recommend the following cpus: dual-core processor: support up to 3 stations under low processing application. quad-core processor: support up to 6 stations under low processing applicat...

  • Page 9

    Multipoint usb over lan workstation mws9940 9 supported display resolutions note always prepare devices as how many stations as the user plan to build up. Then classify into the mac addresses for different servers. In order to better organize for different locations, the table as below is strongly r...

  • Page 10

    Multipoint usb over lan workstation mws9940 10 . Table 1.

  • Page 11

    Multipoint usb over lan workstation mws9940 11 table 2.

  • Page 12

    Multipoint usb over lan workstation mws9940 12 device installation - software installing the device driver enables windows mutlipoint server 2011 to recognize the mws300uv2. Please make sure the mws300uv2 is unplugged from your server before executing the setup program. Step 1 insert the driver inst...

  • Page 13

    Multipoint usb over lan workstation mws9940 13 step 3 license agreement; review it and check i accept the terms of the license agreement click next to accept the license agreement..

  • Page 14

    Multipoint usb over lan workstation mws9940 14 step 4 setup is searching for installed features... *you may notice the screen flashes during hardware installation. It is part of the normal process. ..

  • Page 15

    Multipoint usb over lan workstation mws9940 15 step 5 driver installation wizard, click finish to continue and restart the computer..

  • Page 16: The Stations Assignment

    Multipoint usb over lan workstation mws9940 16 the stations assignment building workstation on single server only step 1 the “multipoint manager” page will be auto-displayed in a minute after system boot-up and administrator log-in. Note: if this page did not pop out automatically, please follow the...

  • Page 17

    Multipoint usb over lan workstation mws9940 17 step 2 click “network stations” as showed: step 2-1 when there is 3 workstation hub is connected, it shows 3 stations on the screen which are free / waiting for assignment inside the “status” column indicating as “not connected”..

  • Page 18

    Multipoint usb over lan workstation mws9940 18 step 3 click the block “□” to select one of the stations under the column on the left side of the “client name” and then click “assign to this server” at the right column as illustrated. Step 3-1 if all of the stations need to be selected, simply click ...

  • Page 19

    Multipoint usb over lan workstation mws9940 19.

  • Page 20

    Multipoint usb over lan workstation mws9940 20 step 4 click “yes” to complete the station assignment. Repeat the same process of step3 – 4 for the any other one of the station you desire to select for station assignment. Step 5 the status column will show “connected” workstation at lower section of ...

  • Page 21

    Multipoint usb over lan workstation mws9940 21 note: if any one of the stations needs to be disconnected, please select the station and click “clear assignment” under “device task item” on the right panel of the screen then click “yes” while the dialog pop up for disconnection. If all of the station...

  • Page 22

    Multipoint usb over lan workstation mws9940 22 stations rename renaming the station may convenient administrator recognizing mac address location by his own design, it needs to be done before station gets assignment. Rename step: 1. Select station by one left click 2. Left click on “rename” at right...

  • Page 23

    Multipoint usb over lan workstation mws9940 23 network setting a local area network setting to be prioritize either by static ip or dynamic ip for this server, this network setting needs to be done before station gets assigned. “dynamic ip” is recommend with router device: 1. Select station by one l...

  • Page 24

    Multipoint usb over lan workstation mws9940 24 update firmware station “update firmware” needs to be done before station gets assignment. Restart device step: 1. Select station by one left click highlighting 2. Left click on “update firmware” under “device task item” 3. Select the firmware file then...

  • Page 25

    Multipoint usb over lan workstation mws9940 25 quick set workstations under local area network environment, multiple server may often exist and required to be use, each server linked with a group of workstation and all workstation (mac address) may appear on every server’s system manager, therefore ...

  • Page 26

    Multipoint usb over lan workstation mws9940 26 step 1 - label remarking mac address and save for records. Label the mac addresses onto the table 1 for server a and server b -grouping server ‘a’ devices (mws9940) and peel the mac address labels from the back side of the hub device. Then paste it on t...

  • Page 27

    Multipoint usb over lan workstation mws9940 27 step 3 the status column on the bottom of the screen shows “connected” while the assignments for server ‘a’ completed..

  • Page 28

    Multipoint usb over lan workstation mws9940 28 step 4 select and match for the stations one by one as assigned and pasted on the server b column of the table 1 in step 1. Then left click “assign to this server ”under“ device task item” to complete assignment. Note: the host pc will show the 2-assign...

  • Page 29

    Multipoint usb over lan workstation mws9940 29 verifying the mws9940 connection step 1 please follow up the illustration below: 1. Start -> 2. All programs -> 3. Multipoint manager(under windows multipoint server folder).

  • Page 30

    Multipoint usb over lan workstation mws9940 30 step 2 click “device manager” then select “devices by connection” as the picture.

  • Page 31

    Multipoint usb over lan workstation mws9940 31 step 3 extend “network usb server bus” trees for all the input and output devices as the picture for verification whether all of the devices have been successfully connected..

  • Page 32

    Multipoint usb over lan workstation mws9940 32 adjusting the screen resolution by default, windows multipoint server 2011 will select the recommended resolution for each connected display. However, if you would like to choose a different resolution, follow these steps: step 1 please follow up the pr...

  • Page 33

    Multipoint usb over lan workstation mws9940 33 step 2: go to multipoint manager => home =>local station => switch to maintenance mode step 3: click ok to continue step 4 press “ctrl + alt + delete” to log in administrator into maintenance mode.

  • Page 34

    Multipoint usb over lan workstation mws9940 34 step 5 right click on the desktop and choose screen resolution from the contextual menu. Step 6 click identify to identify each display. Then click on the display to be adjusted and choose the desired resolution from the resolution dropdown menu. (sugge...

  • Page 35

    Multipoint usb over lan workstation mws9940 35 device driver un-installation the following procedure allows you to uninstall the mws9940 device driver. Please make sure all mws9940 are clear assignment from your (network stations) before executing the device driver uninstallation program. Step 1 1. ...

  • Page 36

    Multipoint usb over lan workstation mws9940 36 step 3 select the “magic control technology – mws xx.Xx.Xxxx.Xxxx” item. Click uninstall button..

  • Page 37

    Multipoint usb over lan workstation mws9940 37 step 4 click “ok” to continue step 5 select “yes, i want to restart my computer now” and click “finish” to reboot. The driver is now uninstalled..

  • Page 38: Specifications

    Multipoint usb over lan workstation mws9940 38 specifications.

  • Page 39: Regulatory Compliance

    Multipoint usb over lan workstation mws9940 39 regulatory compliance fcc this equipment has been tested and found to comply with part 15 of the fcc rules. Operation is subject to the following two conditions: • this device may not cause harmful interference • this device must accept any interference...

  • Page 40: Troubleshooting Tips

    Multipoint usb over lan workstation mws9940 40 1. Disconnecting a workstation while videos are playing may cause stability issues. Do not disconnect workstations during video playback. 2. Using different display resolutions on workstations may cause display issues if a station is disconnected. Set a...