Magicsing ET19KV User Manual - page 18
Functions & Settings - Chapter.04
c) Select “Yes” and click “Finish” to restart the computer.
2) ET Manager Installation
After restarting the computer, take the “Installation CD” out and put it back
into your PC again.
Click "Install ET Manager" (②) on the first pop-up screen and follow the
instructions of “ET Manager InstallShield Wizard”.
When you see the pop-up screen below, click "Finish" to complete
the ET Manager installation.
CHAPTER. 04
|
18
VER.100
Chapter.04 - Functions & Settings
3) EXIT
After completing the two previous installations, you will see the screen
below again.
In order to exit, click "Cancel" (③).
1
2
3
And follow the below steps to execute the ET Manager properly.
2
HOW TO CONNECT MAGICSING TO A PC WITH A USB CABLE
1. Turn on the power of main station.
2. Plug the USB cable in the PC’s USB port as shown in the picture below.
3. Plug the USB cable in the MagicSing's USB port as shown in the
picture below.
DC IN 8V
“USB CONNECTED” will appear on TV SCREEN.
19
|
CHAPTER. 04
VER.100