Pitco frialator inc. Www.Pitco.Com p.O. Box 501, jct. I-89 & i-93 concord, nh 03302-0501 • 509 route 3a, bow, nh 03304 usa telephone (800) 258-3708 • (603) 225-6684 • fax: (603) 225-8497 pn l25-007 rev. 1 (12/01) © 2001 - pitco frialator incorporated lpaga/lpg & cg outdoor grill options installation...
Table of contents 1. Hood handle and hood bracket assembly ........................................................................................ 2 2. Twin hoods for the lpaga/lpg-60 .................................................................................................. 3 3. Single hood...
2 l25-007 rev. 1 12/2001 1. Hood handle and hood bracket assembly the handles (top illustration) each handle has two support rods and a center tube. To assemble the handles more easily, open each hood up and turn it upside down on a large table. The ¾” long bolts from the handle hardware kit go in f...
3 l25-007 rev. 1 12/2001 2. Twin hoods for the lpaga/lpg-60 mount a pair of outer and a pair of center hood brackets as shown above. Lift the hoods, one at a time, onto their brackets, making sure the pivot bushings sit in the bracket cradle on each side, as shown in the close-up illustration above....
4 l25-007 rev. 1 12/2001 3. Single hood for the lpaga/lpg-30 mount a pair of outer hood brackets as shown. Lift the hood onto its brackets, making sure the pivot bushings sit in the bracket cradle on each side, as shown in the close-up illustration above. Bracket mounting front view inner hood outer...
5 l25-007 rev. 1 12/2001 4. Single (full size) hood for the lpaga/lpg-60 mount a pair of outer hood brackets as shown. With a minimum of two persons, lift the hood onto its brackets, making sure the pivot bushings sit in the bracket cradle on each side, as shown in the close-up illustration above. F...
6 l25-007 rev. 1 12/2001 5. Full hood for the cg-60 the cg-60 hood frame is designed only for use on the cg-60. It cannot be used on the cgl or lpaga/lpg models. Step 1 the windguard assemble the front and rear wind guards using the ½” long ¼-20 screws and the acorn nuts from the hardware bag in the...
7 l25-007 rev. 1 12/2001 6. Steamer support, steamer pan set and magigriddle options using the steamer support option remove the cooking grid from the side of the charbroiler to be used for steamer cooking. Place the steamer support directly on the radiants. Sit the 4” deep water pans in the steamer...
8 l25-007 rev. 1 12/2001 7. The windguard option assemble the windguard ends to the back using the ½” long ¼-20 screws and the acorn nuts from the hardware bag in the windguard package. Mount the windguard on the charbroiler frame (either at the back or in the front) using the ¾” screws and the hex ...
9 l25-007 rev. 1 12/2001 8. Split options for the lpaga/lpg-30 using the steamer support option remove the cooking grid from the side of the charbroiler to be used for steamer cooking. Place the steamer support directly on the radiants. Sit the 4” deep water pans in the steamer support. Add water to...
10 l25-007 rev. 1 12/2001 9. Cutting board for the lpaga/lpg-30 30” richlite® cutting board option set for magicater, 9825-2000101. Contents: • (1) left hand bracket, 5403-0989801 • (1) right hand bracket, 5403-0989802 • (2) screws, pan head phillips, 1/4-20 x 3/4” long with captive internal tooth l...
11 l25-007 rev. 1 12/2001 10. Cutting board for the lpaga/lpg-60 60” richlite® cutting board optionset for magicater, 9825-2000100. Contents: • (1) left hand bracket, 5403-0989801 • (1) right hand bracket, 5403-0989802 • (2) screws, pan head phillips, 1/4-20 x 3/4” long with captive internal tooth l...
L25-007 rev. 1 12/2001 12 lpg-30/60 slide side shelf assembly onto the desired side of the unit, and install two ¼-20 screws through the shelf support and into the frame side. Note: side shelf comes assembled for right hand applications, for left side remove spice/utility rack and reinstall on the o...
13 l25-007 rev. 1 12/2001.
In the event of problems with or questions about your equipment, please contact the pitco frialator authorized service and parts representative (asap) covering you area, through the national service network at: (800)298-1862 us only, 24 hours in the event of problems with or questions about your ord...
