MAGIMIX L EXPRESSO FILTRE Instructions For Use Manual - Aftercare
12
If you leave the appliance idle for 6 minutes, it will automatically return to the coffee-brewing
temperature.
NB : If you wish to brew espresso coffee immediately afterwards, press
in order to return
to the right temperature more quickly. The
indicator light will continue to flash until the
temperature has dropped sufficiently to brew good espresso coffee.
•
To bring down the temperature more rapidly and to rinse the pipe, place an empty container
under the pipe, press
and turn the selector to . As soon as water starts to flow continuously
from the pipe, turn the selector back to , then press
. Wipe the pipe immediately after use
with a damp sponge.
Do not touch the pipe, as it can become extremely hot.
Caution, steam can scald.
•
Cappuccino recipe page 20.
Hot water function
•
Check that there is fresh water in the tank.
•
Once the appliance has been switched on and the
indicator light has come on, press
.
If the appliance is not yet ready, the
indicator light will flash. However, if it is sufficiently hot,
the light will stay on.
•
Place a container under the pipe and turn the function selector to . Once you have obtained the
quantity of water you wish, turn the selector in an anti-clockwise direction to
to stop the flow.
Press
, to return to the coffee function.
Aftercare
The efficient operation and lifespan of your appliance – as well as the application of the warranty
- depend on rigorous and regular aftercare.
Before performing any aftercare operation, make sure you have unplugged your applian-
ce and that it has cooled down.
Cleaning
•
The body of the coffeemaker: from time to time, wipe the outside of
the machine with a damp cloth.
•
The water tank: once a week, clean with a non-abrasive washing-up
liquid. Change the water at least every 2 days.
Expresso & Filtre AN 30/07/03 09:23 Page 12