MAGIMIX L EXPRESSO Instructions For Use Manual - Switching It On
9
•
Coffee pod
The 1 cup filter can cater for most types of espresso pods on the
market. Place the pod in the special filter. As the shape of the paper
may vary according to the brand, make sure that the pod is positioned
in the centre of the filter.
Fold over the edges of the filter paper to avoid them sticking out
of the filter.
•
Insert the filter holder (filter locking device towards the back) in the
extractor head, opposite the arrow and turn it to the right.
NB : The handle should be off centre, pointing slightly to the right.
•
Position one or two cups under the filter holder.
You can only brew one cup of coffee at a time using the pod filter.
Switching it on
•
Check that the function selector has been turned to
and that the
machine is ready (
and
indicator lights on and no longer
flashing).
NB : The brewing takes place in
two stages
, as your appliance has
a system for
pre-humidifying
the ground coffee in order to bring out
its full flavour.
•
For
the Expresso
and
Expresso Program
models : press
: the red
indicator light will start to flash and the coffee will start to flow. Once
you have obtained the amount of coffee you want, press
again.
The flow will stop and the red
light will stay on.
•
For
the Expresso Program Automatic
model :
Your model is programmed to halt the flow of coffee automatically,
once it has produced a preselected volume :
- Turn the volume adjuster to select the amount of coffee you wish to
brew.
- Press
: the coffee will start to flow, then cease automatically.
NB : The actual amount of coffee produced will depend on the type of coffee (ground or pod), the
fineness of the grind, the quantity of coffee and the compactness of the ground coffee.
L'Expresso AN 30/07/03 10:11 Page 9