Magma A10-207 Owner's Manual

Other manuals for A10-207: Owner's Manual
Manual is about: Magma - Marine Kettle 2 Gas Grill

Summary of A10-207

  • Page 1

    For models: a10-207 • a10-217 owner’s manual read these instructions carefully before use. Familiarize yourself with the appliance before connecting it to its gas container. Keep these instructions for future reference. For questions regarding performance, assembly, operation, parts, or returns, con...

  • Page 2: Important Safety Warnings

    • use outdoors only. • do not use this appliance inside the boat or any enclosed space. • grills radiate heat. Clearance from combustibles, 24” sides and back. Never use under awnings, patio covers, etc. • use propane gas only. Fuel storage should be in compliance with the american boat and yacht co...

  • Page 3: Setting Up Your Grill

    Setting up your grill 3 mounts sold separately. See our website www.Magmaproducts.Com for mounting options. Burner ground strap grease tray grease tray pins electrode 5 with grill body tightly attached to l-bracket and taking care not to damage electrode, unthread burner 3 full revolutions only. Cau...

  • Page 4: Connecting Fuel Source

    Control valve regulator •uses standard 1-lb. Disposable propane canisters (dot-39 nrc 228/286). •prior to installing valve, become familiar with the valve function and graphics on valve knob. Never force the knob. Always turn or push gently. •turn control valve to “lock ” and install gas canister be...

  • Page 5: Operating Procedures

    Operating procedures using grill with on-board lpg (propane) systems warning: do not overheat grill. Magma grills do not require pre-heating. Stainless steel loses anti- corrosive characteristics when subjected to extreme heat. Most grilling is done on low temperature with the lid closed. If medium ...

  • Page 6

    6 • for smaller pots and pans, place the cookware directly on the three tongs of the radiant plate. • for larger pots and pans, including woks, invert the radiant plate and place the cookware directly on the radiant plate. To help create your own magma gourmet experience every time you grill, please...

  • Page 7: Maintenance

    Maintenance 7 complete disassembly for cleaning (or access to piezo igniter) 1 - remove entire grill body from l-bracket of mount. 2 - unthread and remove burner, fire pan and grease pan from outer bowl. 3 - to inspect piezo igniter, remove single screw from inside of outer bowl to release igniter b...

  • Page 8: Replacement Parts

    Replacement parts a10-207 original size a10-217 party size 10-153 cooking grill 10-665 radiant plate & dome 10-657 burner 10-658 fire pan 10-652 lid w/hinge & fasteners (no handle) 10-659 outer bowl 10-651 complete handle assembly & fasteners 10-651 complete handle assembly & fasteners 10-161 grease...

  • Page 9: Trouble Shooting Guide

    Trouble shooting guide problem burner will not light with igniter burner will not light even with match flare-up yellow sooty flame blow-out hot spots possible cause electrode covered with grease or residue electrode not directly under burner ground strap electrode wire loose, disconnected, or corro...

  • Page 10: Limited Warranty

    Limited warranty accessories 83-207 0510 magma products, inc. 3940 pixie avenue, lakewood, ca 90712 • usa phone (562) 627-0500 • e-mail: mail@magmaproducts.Com www.Magmaproducts.Com magma and the magma logo are registered trademarks of magma products, inc. Marine kettle 2 is a trademark of magma pro...

  • Page 11

    Grills for use with pre-regulated lpg. Models: a10-205nz-3 • a10-207nz-3 • a10-215nz-3 • a10-217nz-3 addendum for gas grills sold in new zealand read complete instructions before operating for pre-regulated, low pressure, lpg systems. This brass control valve is designed to allow use of the magma ma...