Magma MDR 24/96 Quick Start Manual - page 9

9

Quick Start Guide

Quick 

Star

t 

Guide

To replace the AIO-8 cards with different I/O cards:

1.  If the MDR24/96 is plugged into AC power, unplug it.

2.  Unscrew the thumbscrews at the top and bottom of each I/O card to be

     removed.  Grasp one thumbscrew with each hand and gently pull the card

     out.

3.  Before you take I/O cards from their bags, touch a grounded metal object

to discharge any static electricity from your body.

4.  Remove the new I/O card from its anti-static bag and put the I/O

     card you just removed from the MDR24/96 into the bag.

5.  Hold the new card so the component side

faces left and line up the top and bottom

edges with the white card guides. Push the

card all the way into the slot until its

faceplate is flush with the back panel.

6.  Hand-tighten the thumbscrews at the top

and bottom of the card. Do not use a

screwdriver.

Note:

Note:

Note:

Note:

Note: Always hand tighten the thumbscrews

at the top and bottom of all I/O cards be-

fore operating the MDR 24/96.

If you want to hook up the MDR24/96 I/O cables

to your console right now, see the console hookup

diagrams in Hookups. Be sure to come right back

here when you’re done.

M

 TAPE IN/OUTS

INPUT

OUTPUT

INPUT

OUTPUT

INPUT

OUTPUT

ANALOG I/O ANALOG I/O ANALOG I/O