Magnadyne Linear Series LS-SUB-75 Owner's Manual - Introduction

INTRODUCTION

Please read all of the information in this manual before using this unit to insure

that you fully understand its capabilities.

WARNING! 

To prevent fire or electrical shock hazard, do not expose this product

to rain or moisture, or remove cover or bottom screws. No user-serviceable parts

inside. Refer servicing to qualified personnel.

CONTROLS AND FUNCTIONS

LEVEL

MIN MAX

LOW-PASS

CROSSOVER

FREQUENCY

ALL-PASS

80Hz

120Hz

LINE IN

L

R

GND, L-, L+

+12V, R-, R+

LS-SUB-75

1

2

3

4

1. Power and High Level Audio Input Connector:

This (6)-Pin connector provides battery power, chassis ground and 2 channel

speaker level input to the LS-SUB-75. Follow the enclosed wiring diagrams for

correct connection.

2. RCA Line Inputs:

These (2) RCA type plugs are for the connection of the Left and Right channel

Line-Output provided by the radio system. These connections are preferred and

should be used if the audio source has the line-out feature.

3. Input Sensitivity Control:

This knob is used to adjust the audio input (6-Pin connector input or line level

input) level as needed for best input matching and proper performance.

4. Low-Pass Crossover Frequency Selector:

The selector switch controls the amount of high frequency that will play from the

woofer. The lower settings prevent less high frequency output and "full-pass"

does not block any high frequency. Adjust to best sound quality.

LS-SUB-75-INS  1/29/07  9:38 AM  Page 2