Magnadyne LS5050CD Operation And Installation Manual

Manual is about: LINEAR series AM / FM Stereo Receiver with CD Player

Summary of LS5050CD

  • Page 1

    Operation and installation manual ® dim mode disp power 1 2 3 band eq as mute memory eject volume select push audio multi-media input ls5050cd am/fm/cd multi-media receiver 4 5 6 rpt/ch+ intro rdm/ch- slp/alm loud reset satellite radio input main speakers b a a+b ® tuner khz am speaker control all o...

  • Page 2: Introduction

    Please take the time to read all of the information in this manual. Familiarity with operation and installation procedures will help you obtain the best possible performance from your new am/fm stereo receiver with cd player. Warning! To prevent fire or electrical shock hazard, do not expose this pr...

  • Page 3

    Button locations and functions 3 1. Power on/off: press to turn the unit on or off. 2. Infrared eye: receives the signals from the optional remote control. 3. Cd slot: to play a cd, insert the disc into slot with label facing up. 4. Display area: this area displays all function information for the r...

  • Page 4

    4 button locations and functions (continued) 15. Speaker control switch: switches the main speakers off/auxiliary speakers on, main speakers on/auxiliary speakers off or main/auxiliary speakers on. 16. Slp/alm (sleep/alarm) button: sets the sleep timer and alarm. (see “sleep timer and alarm operatio...

  • Page 5: General Operations

    5 general operations power on/off: press the power button to turn the unit on/off. B a a+b dim mode disp power 1 2 3 band eq as mute memory eject volume select push audio multi-media input ls5050cd am/fm/cd multi-media receiver 4 5 6 rpt/ch+ intro rdm/ch- slp/alm loud reset satellite radio input mai...

  • Page 6: Sound Controls

    6 sound controls bass: select the bass mode by pressing the volume/ select button. Increase the bass by rotating the knob clockwise. Decrease the bass by rotating the knob counterclockwise. After 5 seconds con- trol reverts back to volume control. Treble: select the treble mode by pressing the volum...

  • Page 7: Sound Controls

    Sound controls (continued) loud: to boost high and low tones at low volume lev- els, press the loud button and “loud” appears in the display. To deselect, press the loud but- ton again and “loud” disappears in the display. B a a+b dim mode disp power 1 2 3 band eq as mute memory eject volume select ...

  • Page 8: Setting The Clock

    8 setting the clock 1. Press the disp button until the colon starts flashing in the clock. 2. Press and hold the memory button until “12h” appears in the display. To change the 24-hour clock (military time), press the l or l but- ton button until “24h’ appears in the display. 3. Press the memory but...

  • Page 9: Alarm Operation

    Cancelling the alarm timer: 1. Press the power button to turn the unit off. 2. Press the slp/alm button, the unit will enter a standby mode and light up the display. 3. Press the slp/alm button again until the “alarm” indicator disappears from the display. 4. Wait approximately 10 seconds and the di...

  • Page 10: Am/fm Operation

    10 manually tuning in a radio station: press the l button to tune in a lower radio station. Press the l button to tune in a higher radio station. B a a+b dim mode disp power 1 2 3 band eq as mute memory eject volume select push audio multi-media input ls5050cd am/fm/cd multi-media receiver 4 5 6 rpt...

  • Page 11: Disc Warnings

    11 disc warnings disc formats supported by this player: cd 12cm disc label side up do not touch the underside of the disc do not bend wipe the disc from the center toward the outside edge handling and cleaning: • dirt, dust, scratches and warping disc will cause non operation. • do not place sticker...

  • Page 12: Cd Operation (Compact Disc)

    12 rough spots on outside edge rough spots on inside edge ball point pen or pencil cd operation (compact disc) general operations: 1. Press the power button to turn the unit on. 2. Gently insert the disc into the slot with the label side up. The unit will automatically load the disc. Note: if a cd d...

  • Page 13: Cd Operation (Compact Disc)

    13 cd operation (compact disc) (continued) ejecting a cd: press the eject button to eject a disc. B a a+b dim mode disp power 1 2 3 band eq as mute memory eject volume select push audio multi-media input ls5050cd am/fm/cd multi-media receiver 4 5 6 rpt/ch+ intro rdm/ch- slp/alm loud reset satellite ...

  • Page 14: Audio Input

    14 audio input b a a+b dim mode disp power 1 2 3 band eq as mute memory eject volume select push audio multi-media input ls5050cd am/fm/cd multi-media receiver 4 5 6 rpt/ch+ intro rdm/ch- slp/alm loud reset satellite radio input main speakers ® speaker control all on main off aux off aux aux indicat...

  • Page 15: Reset Button

    15 the lcd display may fail to function normally due to the vehicle’s battery condition, and could require resetting the radio microprocessor if: • the vehicle has been “jump started” from a dead battery condition. • the vehicle battery becomes very low and is quick-charged. • the vehicle battery is...

  • Page 16: Installation

    16 installation 9 3 / 4 ” 9 1 / 4 ” 3 5 / 8 ” 6 1 / 2 ” chassis opening structural stud end caps wall panel caution: do not install radio without rear cover installed: no user-serviceable parts inside. Rear cover provides protection against potential fire hazard. Ls5050cd-um 4/29/08 12:26 pm page 16.

  • Page 17: Speaker Connections

    17 _ + _ + brown/black wire brown wire white wire purple/white wire (common -) auxiliary speaker left speaker a left 9-pin connector 4-pin connector _ + _ + gray/black wire gray wire purple wire auxiliary speaker right speaker a right _ + green/black wire green wire speaker b left subwoofer (optiona...

  • Page 18: Auxiliary/ Input Connections

    18 9-pin connector red wire (+) to 12 volt dc power black wire ground this unit for use only with a 12 volt dc power source with a negative ground. Model: dp36axt in-wall antenna (optional) plug either type of antenna into the female antenna receptacle 10 amp fuse inside auxiliary/ input connections...

  • Page 19: Safety Instructions

    19 outdoor antenna grounding: if an outside antenna is connected to the receiver, be sure the antenna system is grounded, so as to provide some protection against voltage surges and built up static charges. Section 810 of the national electrical code, ansi/nfps no. 70-1983, provides information with...

  • Page 20: Warranty

    © copyright 2008 magnadyne corporation ls5050cd-um rev. A 4-28-08 warranty one (1) year limited warranty magnadyne corporation or its authorized agents will within one year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the opti...