Magnadyne M2500CD Operation And Installation Manual - Troubleshooting
14
Troubleshooting
If it appears that your unit does not operate prop-
erly, first consult this checklist. It may be some-
thing simple which has been overlooked.
Under no circumstances should you try to repair
the player yourself, as this will invalidate the
warranty. Only qualified service personnel can
remove the cover or service this player.
The power does not turn on:
• The lead wires are not connected properly to
the connectors. Make sure the connection is
correct.
• The fuse has blown. After checking for short
circuits in the wires, replace the fuse with one
having the same rating.
The disc can not play:
• Disc is of poor quality or damaged or not clean.
Clean or replace the disc with one of higher
quality.
• The disc installed is not supported by the unit.
Examine the disc type.
The desired source will not appear even though
you press the MODE button:
• The device is not correctly connected to the
M2500CD. Connect the device correctly.
• The device is not compatible with the M2500CD.
For example the MP3 recording method may be
incompatible with the M2500CD.
If the fuse should blow, check that the wiring is
correct. If the wiring is correct, replace the fuse
with the same amperage rating as the original.
Rear Blade Fuse = 10 Amp.
Replaceable Fuse
10
10 Amp Fuse