Installation and operations manual m9000 am/fm stereo receiver and auto stop cassette deck m9050h high power am/fm stereo receiver and auto reverse cassette deck r ff / ej tone balance • vol power auto storage preset memory auto stop cassette fad seek as band f/c 1 2 3 4 5 6 tune up down pll synthes...
Congratulations on your new purchase of a magnadyne automotive stereo / cassette system. The unit you chose incorporates a microcomputer managed electronic am/fm stereo tuning system and fm optimizer along with rugged auto stop or auto reverse cassette mechanism. The two as a combination will provid...
Installation procedure step 1: after obtaining the required space and mounting hold dimensions required, release the mounting sleeve from the unit by pressing inward on the sides of the unit and sliding the mounting sleeve off the unit. Insert the mounting sleeve into the hole on the dashboard. Secu...
Installation procedure 4 nut washer sheet metal screw metal strap dashboard mounting sleeve removal keys removing the unit figure 1 m9000/m9050h/-2 08/04/00 7:57 am page 4.
Wiring: note 1: if you are replacing an already existing factory installed radio, contact your local car stereo installation center for the correct wire color code for your vehicle. In many cases, the installation center can provide you with adapter plugs that will connect directly to your existing ...
Installation procedure speaker connections: note: every speaker has a positive (+) and a negative (-) connection terminal, there- fore every speaker must have two wires connected to it. To properly connect the speaker system to your new magnadyne radio, you must have a + and - wire com- ing from eve...
7 installation procedure left front speaker right rear speaker right front speaker left rear speaker brown wire + - + - + - + - gray wire white wire blue wire green wire orange wire four speaker wiring 9-pin plug from radio yellow wire +12 output for power antenna pink wire connect to battery + red ...
Auto storage pr high powe auto reverse as tune up down radio operation to turn on the unit and operate the radio, repeat the following procedures. 1. Turning the unit on rotate the vol knob to the right until it clicks to turn the unit on 2. Radio band selection (all models) to select the am or fm r...
9 radio operation for automatic seek tuning, press the seek button once and the tuner will automati- cally seek to the next strongest station. When a strong station is picked up by the tuner the station will lock on and be dis- played in the digital display area. To con- tinue seeking stations, the ...
10 radio operation tone control: (m9000) rotate this control clockwise to increase the high tone and counter clockwise to decrease the high tone. Treble tone control: (m9050h only) rotate this control clockwise to increase the high tone and counter clockwise to decrease the high tone. Bass tone cont...
Radio operation 11 fader control: (continued) note 1: since the fader control varies the output of the amplifier between the front and rear speakers, it is normal for the overall volume of the speakers to drop slightly when the control is centered. (all 4 speakers playing with equal power) note 2: i...
Programming the unit 12 entering radio stations into memory: (all models) 1. Use the vol switch to turn the unit on 2. Use the band button to select the memory group you want to store the radio stations in. For example, select am1 or fm1 to preset stations into the first group for that band. 3. Use ...
13 programming the unit recalling memorized stations: method 1: (all models) 1. Press the band button to select the memory group you want to recall the radio stations from. 2. Press and release the desired memory location button to access any memorized station. Note: do not hold the memory location ...
14 tape operation 3a. The tape play indicator will be dis- played in the display area. (m9000 only ) 3b. Either the indicator or the indi- cator will appear in the display area. (m9050h) note: (m9050h) if the indicator is dis- played, the cassette side that is up will be playing and if the indicator...
15 care and maintenance fuse replacement: to replace the the fuse, press the holder together and twist it slightly until the two pieces separate. Replace the fuse with only the specified rating located in the outside of the fuse holder. Tape usage: your new magnadyne stereo cassette player will play...
16 warranty one (1) year limited warranty magnadyne corporation or its authorized agents will within 1 year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the magnadyne corporation or its authorized agents, if said...
