1. DL manuals
  2. Magnadyne
  3. Car Receiver
  4. M9800
  5. Installation And Operation Manual

Magnadyne M9800 Installation And Operation Manual

Manual is about: M9800 AM/FM/WB Stereo Receiver

Summary of M9800

  • Page 1

    Installation and operations manual r © copyright 1998 magnadyne corporation m9800 am/fm/wb stereo receiver.

  • Page 2: Introduction

    Your new am/fm unit incorporates a microcomputer managed electron- ic am/fm stereo tuning system and fm optimizer. The two as a combina- tion will provide the user with the finest crystal clear am/fm stereo radio broadcast reproduction. To insure trouble free long term per- formance from your new un...

  • Page 3: Installation Procedure

    Installation procedure removing the unit: in the event that the unit requires removal from it’s mounting location, repeat the following procedures. A. Release the rear support strap. B. Insert the keys provided into the slot on both sides of the chassis until locked. (snapped into place) c. Pull on ...

  • Page 4: Installation Procedure

    Installation procedure fad vol pwr tone scan r.Freq band 1 5 2 3 4 tune weather am / fm / wb stereo bal 4 nut washer sheet metal screw metal strap dashboard mounting sleeve removal keys removing the unit figure 1.

  • Page 5: Installation Procedure

    Installation procedure speaker connections: note: every speaker has a positive (+) and a negative (-) connection termi- nal, therefore every speaker must have two wires connected to it. To properly connect the speaker system to your new magnadyne radio, you must have a + and - wire coming from every...

  • Page 6: Installation Procedure

    Installation procedure left front speaker left rear speaker + - green wire orange wire 12 vdc constant green/black wire black/green wire green/red wire right rear speaker right front speaker + - + - + - gray wire black/gray wire gray/black wire gray/red wire red wire 12 vdc ign./acc. Lead black wire...

  • Page 7: Display

    Control button identification 7 2 16 3 47 8 5 10 9 figure 2 1. On/off power switch, control and volume level adjuster. 2. Fader control. 3. Balance and tone controls. 4. Radio band selector button. 5. Manual tuning control buttons. 6. Radio station scan button. 7. Frequency selector button. 8. Weath...

  • Page 8: Using The Radio

    Listening to the radio: 1. Turn the vehicle’s ignition key to the “on” or “acc” position to pro- vide power to the radio. 2. Rotate knob (1) clockwise to turn the radio on. Adjust the volume knob (1) to a low listening level. 3. Use the band button (4) to select the am or fm radio band. The fm band ...

  • Page 9

    Clock setting programming setting the clock with the radio off 1. Turn the vehicles ignition key to the “on” or “acc” position to pro- vide power to the radio. You will know that radio has sufficient power as the clock will be displayed in the lcd display window (9). 2. Press the ‘r.Freq” button (7)...

  • Page 10: Audio Adjustments

    10 volume level 1. Rotate the volume control knob (1) clockwise to increase the volume. 2. Rotate the volume control knob (1) counter clockwise to decrease the volume. Left to right balance 2. Rotating the “bal “ knob (3) to the left will balance the speakers to the left. 3. Rotating the “bal” knob ...

  • Page 11: Specifications

    Specifications am/fm tuner: fm frequency range . . 87.5 - 107.9mhz am frequency range . . 520 - 1720 khz if rejection . . . . . . . . . . . . . . . Am 45db . . . . . . . . . . . . . . . . . . . . . . . . . . Fm 70db image rejection . . . . . . . . . . . . Am 55db . . . . . . . . . . . . . . . . . . ...

  • Page 12: Warranty

    Warranty one (1) year limited warranty magnadyne corporation or its authorized agents will within 1 year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the magnadyne corporation or its authorized agents, if said pr...