1. DL manuals
  2. Magnadyne
  3. Car Video System
  4. MV-VCRUSER02
  5. Owner's Manual

Magnadyne MV-VCRUSER02 Owner's Manual

Manual is about: Movie Vision In Vehicle Entertainment System with Drop Down 6.4” and 10.4" TV Screen, Remote Control, Hi-Fi VCR and Mono VCR with Wireless Headphones

Summary of MV-VCRUSER02

  • Page 1

    Owner’s manual in vehicle entertainment system with drop down 6.4” and 10.4" tv screen, remote control, hi-fi vcr and mono vcr with wireless headphones patent pending for operation assistance or technical assistance after reading the troubleshooting guide in this manual, please call toll free (800) ...

  • Page 2: Important Safeguards

    Important safeguards 1. Read instructions: all the safety and operating instruc- tions should be read before operating any of the compo- nents in the movievision tm system. 2. Retain instructions: the owners manual should be retained for future reference of operation. Leave this man- ual in the vehi...

  • Page 3: Table of Contents

    Video cassette tape information this vcr will operate with any cassette that has the vhs mark. For best results, we recommend the use of high-quality video cassette. Do not use poor quality or damaged tapes. Precautions: • avoid moisture. Moisture condensation may occur on the tape if it is moved fr...

  • Page 4: Vcr Controls

    Remote control battery install / replace vcr controls power eject stop rec rew play ff power rec slp heat dew r cassette compartment for cassette insertion/removal power turns vcr on and off eject ejects cassette rec starts recording led indicators stop stops tape movement rew rewinds tape (from sto...

  • Page 5: Vcr Tape Playback

    Vcr tape playback 1. Turn “on” the ignition switch and power will be applied to the movievision tm system. 2. Release the viewing screen from it’s folded and locked position in the viewing pod. 3. Point the remote at the viewing screen and press “power” or press “power” on the front panel of the vcr...

  • Page 6: Recording

    Recording 1. Turn “on” the ignition switch and power will be applied to the movievision tm system. 2. Release the viewing screen from it’s folded and locked position in the viewing pod. 3. Point the remote at the viewing screen and press “power” or press “power” on the front panel of the vcr. 4. Ins...

  • Page 7

    6.4" viewing screen controls and functions 1. Infrared eye point the remote control in the direction of the infrared eye when accessing the functions provided by the remote control. 2. Viewing screen release to release the screen, push inward on the movievision tm logo and pull downward. Place the s...

  • Page 8

    6.4" viewing screen controls and functions 7. Transmitter frequency selection: the movievision tm viewing screen transmits a signal that is received by the movievision tm headphones and can also be received by the vehicle’s car radio. There are 3 fre- quencies available for use but only one can be u...

  • Page 9

    10.4" viewing screen controls and functions 1. Infrared eye point the remote control in the direction of the infrared eye when accessing the functions provided by the remote control. 2. Viewing screen release to release the screen, push inward on the movievision tm logo and pull downward. Place the ...

  • Page 10

    10.4" viewing screen controls and functions backlight adjustment: adjusts the intensity of the rear panel lighting. For best results, this should be not be adjusted from the factory setting (50% setting). Menu sel. ☛ 7. Transmitter frequency selection: the movievision tm viewing screen transmits a s...

  • Page 11

    Brightness adjustment: adjusts the amount of white light in the image on the screen. Menu sel. ☛ step 1 u sel. ☛ ☛ step 3 brt press the menu button once screen display press the up and down buttons to adjust the brightness screen display menu sel. ☛ step 4 press the menu button twice to exit. Screen...

  • Page 12

    Saturation adjustment adjusts the intensity of the colors on the screen from black and white conditions to full color condition.. Menu sel. ☛ step 1 u sel. ☛ ☛ step 3 sat press the menu button once screen display press the up and down buttons to adjust the saturation screen display menu sel. ☛ step ...

  • Page 13

    Reset when used will reset all the screen settings back to manufacturer default settings. Menu sel. ☛ step 1 u sel. ☛ ☛ step 3 press the menu button once screen display press either the up or down buttons to reset screen display menu sel. ☛ step 4 press the menu button twice to exit. Screen display ...

  • Page 14

    14 replacing domelight bulbs: to replace a domelight bulb, repeat the following procedure. Warning! In some cases, the domelight maybe hot, proceed with caution. 1. Use your fingernail to pull the lever at the end of the domelight lens forward and downward this will release the lens to expose the bu...

  • Page 15: Headphone Operation

    15 headphone operation your movievision tm entertainment system is supplied with two (2) movievision tm headphones. The correct operation, care and maintenance of the headphones is critical to their ability to provide the user with a lifetime of operation. Misuse, abuse and neglect of the headphones...

  • Page 16: Standard Headphone Operation

    16 4. Connecting a second set of headphones your movievision tm headphones have a plug receptacle locat- ed at the bottom of the “r” ear pad. (4) a second set of per- sonal type headphones (must have 3.5 mini male type plug) can be connected at this point. Note: when a second pair of headphones are ...

  • Page 17: Digital Headphone Operation

    Digital headphone operation 1. Turn on the headphones: to turn on the headphones, press the ”pwr” button on the right side ear pad. The digital display will show radio station digits when the headphone is on. 2. Tuning an fm radio station: a. Press the ”up” or ”down” button to manually tune in an fm...

  • Page 18: Cleaning and Maintenance

    18 servicing: should your movievision tm vcr become inoperative, do not try to correct the problem by yourself. There are no user serviceable parts inside. Remove the unit from the vehicle and take it to an authorized movievision tm service facility. Cabinet cleaning: the front panel of the movievis...

  • Page 19: Warranty

    One (1) year limited warranty magnadyne corporation or its authorized agents will within 1 year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the magnadyne corporation or its authorized agents, if said product or ...

  • Page 20: Replacement Parts Order Form

    Mv-vcruser02 rev. A 2-6-02 © copyright 2002 magnadyne corporation replacement parts order form send orders to: magnadyne corporation we accept checks, money orders, visa and master card attn: consumer parts sales make checks payable to: magnadyne corporation p.O. Box 5365 carson, ca 90749-5365 ship ...