Magnadyne PL61 Owner's Manual - Remote Control Transmitters
2
The information enclosed will provide a ready reference of the operation and maintenance of your new
security system. The operating instructions enclosed are for two security system models. Many of the
functions are similar between the models but be sure to follow the instructions that pertain to your model
security system only.
Remote Control Transmitters
“Using the Transmitter to Arm the Security System”
1. Exit the vehicle and close all entrances.
2. Press and release the LOCK button on the transmitters. The security system will respond as follows:
A. The horn/siren will chirp one time.
B. The LED indicator will begin to flash at a steady rate.
C. The parking lights will flash one time.
D. The starter is deactivated which prevents the engine from being started.
E. All protected entrances are armed.
F. The horn/siren will sound one additional time if the vehicle has delayed interior lights that stay on
after the door is closed.
The security system is now fully armed!
Use the picture enclosed as reference to the explanations of
operation that are included in this manual.
Security System Operation
Silent
Arming
UNLOCK /
DISARM
Button
LOCK /ARM
Button
PANIC
Button
Channel 2
Button