Magnasonic PP71 User Manual - - 5 -
- 5 -
SET UP
•
Connect one end of the AC adapter to the Projector 12V port and
plug the other end into an electrical outlet.
•
Connect the HDMI cable (included) to the HDMI port and the
other end to your device or connect the MHL cable to the
projector HDMI port and the other end to your device (e.g. smart
phone).
Note: You may need an adapter to connect your device to the
HDMI cable.
Important! Apple® devices require an Apple Digital AV Adapter
(sold separately) for HDMI use.
For all other devices, check the manufacturer’s instructions. Additional
adapter specific to your device may be required (e.g. Micro/Mini HDMI).
•
Connect a speaker to the 3.5mm audio out jack, if desired.
POWERING UP AND VIEWING MEDIA
•
Power on the Projector by sliding the Power Switch to on.
•
Touch the Circle Mode area on the top of the Projector, the screen
will then show you a choice of two modes, “Movie” for video
and “Document” for text-based media. Select your preference by
touching the Mode area on the top of the Projector while your
choice is highlighted.
•
Choose the media you would like to view from the menu on your
device and play it as you normally would.
•
The Projector can display media just about anywhere! However, for
the best quality, we suggest you find a light colored wall (preferably
smooth and white) and place the Projector with its lens facing the
location. The Projector can show media up to 60’’ just move the
projector towards and away from the wall to adjust the size of the
picture. Dimming room lights will also add to viewing quality.