Magnat Audio CAP 1.2F Owner's Manual - page 2
8. TECHNICAL DATA/SPECIAL FEATURES
Capacity:
1.2 Farad ±10 %
Maximum operating voltage: 12 - 14.8 V DC
direct-current voltage
Operating temperature:
-20 – +60 °Celsius
E.S.R.:
< 0.004 Ohm @ 100Hz/25°C
Dimensions (Ø x H):
76 x 220 mm
Weight:
1.45 kg
• 3.5-character digital voltage display with red LEDs
• Two blue LEDs to display the operating voltage
• Warning (peep sound) in the event of incorrectly
connected poles and short circuit
• Aluminium cup made from brushed aluminium
• Sturdy nickel-plated hexagonal-socket screw terminals in
a chrome look
• Protective cover made from transparent plastic
5. If the supply voltage in the vehicle fluctuates by +/-0.1
volts again, the board with the digital display and
status LEDs will switch back on.
Fig. 3: Connections/Displays
Status LED
Status LED
(-) Earth terminal
(+) Battery terminal
Digital display
7. REMOVAL/DISCHARGE PROCESS (FIG. 4)
For your safety the capacitor must be discharged before it
is removed. If a short circuit is caused during the removal
process, high current values and sparks can occur.
This can damage the capacitor or cause it to explode.
Never discharge the capacitor by shorting it! Only use the
supplied resistor!
To discharge the capacitor first disconnect the (+)
connecting cable from the capacitor. The earth terminal
(-) should remain connected. Now connect the supplied
resistor to the positive and negative terminals of the
capacitor. The resistor can get hot during this process
(risk of burning). The capacitor is now discharged; the
digital display and status indicator go out when 5 volts is
reached. Even now the capacitor is not fully discharged.
Please wait a while (approx. 2-3 minutes) until it is
completely discharged.
Fig. 4
5. INITIAL USE/CHARGING PROCEDURE
The supplied resistor must be used when charging the
capacitor for the first time! This will prevent an excessive
charging current and connecting sparks from occurring.
The resistor can get hot during this process (risk of
burning). When the capacitor is charged to 10V connect the
prepared positive cable to the capacitor. The capacitor is
now charged to the battery voltage (12 to 14.8V).
Fig. 2: CHARGING THE CAPACITOR
6. SWITCH-ON PROCEDURE AND DISPLAY
FUNCTIONS
1. When the initial charging process starts the control
electronics board and the digital display switch on
automatically. The blue status LEDs and the red digital
display flash when the capacitor is charging and if
the voltage level is between 5 and 9V. The red digital
display indicates the value 0.00 during this process.
After reaching 9V the voltage value is indicated by the
red LED display, whereby the LED display and status
LEDs flash.
2. When the capacitor is fully charged, the status LEDs
and the digital display illuminate permanently. The
digital display will also indicate the supply voltage of
the vehicle‘s electronics (from 10V).
3. If the DC voltage of the vehicle‘s electronics fluctuates
by more than +/-0.1 volts, the board with the digital
display and blue LEDs operates automatically, and
it remains switched on (example: the audio system
reproduces heavy bass lines or another electronic
device is being used that causes voltage dips).
4. If the DC voltage of the vehicle is stable and does not
fluctuate by +/-0.1 volts, the board with the digital
display and status LEDs initially retains its „ON“
status. The digital display and status LEDs switch off
automatically after one minute, however, and remain
in a standby mode to indicate that the voltage in the
vehicle is stable.
4. INSTALLATION
Installing the capacitor
To ensure optimum reproduction the CAP 1.2F should be
installed as close to the amplifier as possible. Ideally, the
capacitor should be installed with short cables in an area
that is protected from the heat generated by the amplifier.
Install the CAP 1.2F securely in the vehicle by using the
supplied transparent plastic brackets and screws. Lay
the cables in such a way that protects the insulation from
damage.
Connecting the earth cable (-)
The capacitor‘s earth cable (-) should be as short as
possible and connected directly to a bare, clean metal
surface on the vehicle‘s chassis. Make sure this
connection is secure and not loose in any way.
Do not connect the capacitor‘s earth terminal (-) to the
amplifier‘s earth terminal or earth cable (see Fig. 1). The
lines connected to the capacitor‘s positive and negative
terminals must be of the same cross section as the power
lines used for the amplifier.
Preparing the connection for the positive cable (+)
The cable used for the capacitor‘s positive terminal should
be as short as possible and connected to the (+)battery
terminal on the amplifier. No fuses should be installed
in the cable between the high-performance amplifier and
capacitor. Make sure there is a suitable fuse in the main
power line (+) to the battery. This fuse is located a short
distance from the battery‘s positive terminal (approx. 20
to 30 cm). If this fuse is not present, please ensure you
install it.
Fig. 1: WIRING DIAGRAM
• Never operate the capacitor with a voltage higher than
that specified in the technical data.
• Never install the capacitor in such a way that it is
exposed to direct sunlight or extreme temperatures (the
operating range is -20 – +60°C). Make sure that the
space selected for installation is cool.
• If the exterior of the aluminium housing is visibly
deformed, it means interior layers are damaged. The
capacitor should then no longer be used and must be
disposed of.
• The capacitor must be protected from contact with
water, oil and grease.
• The capacitor must be mounted in a safe, dry place.
• The supplied charging resistor must be used when
charging the capacitor for the first time, otherwise
sparks could be generated by the high inrush current and
damage connectors and cables (see sections 5 and 7).
• MAGNAT accepts no responsibility for any damage
caused (e.g. physical damage, hearing loss, damage
to property, etc.) as a result of misuse of this product,
i.e. due to incorrect or unsafe installation or incorrect
connection.
2. PACKAGE CONTENTS
A. High-performance capacitor with digital display
B. Protective cover
C. Mounting brackets
D. Operating instructions
E. Bag containing screws, washers, Allen key and 47 ohm
charging/discharging resistor
3. DESCRIPTION
This high-performance capacitor with digital display is an
energy storage module which stabilises the power supply
for high-performance amplifiers. In order to reproduce bass
pulses the amplifier needs high current values (pulses). As
car batteries are not designed to deliver a high short-term
current for high-performance car audio systems, it makes
the CAP 1.2F a logical addition to your audio system. The
bass response generated by your system will be enhanced
as a result. This capacitor is capable of storing a large
amount of energy and releasing it again quickly.
Another feature of the CAP 1.2F is its ability to filter AC
voltage that is induced by the amplifier‘s power supply
unit. If this is not filtered, it can cause static noise in your
vehicle‘s audio system.
Thank you for choosing a MAGNAT product. We hope this
manual clearly explains the functionality of your high quality
capacitor and that the descriptions used are simple and
easy to understand.
Please read this manual carefully prior to installation
to avoid damaging your audio system and the vehicle‘s
electronics, and to prevent personal injury.
This manual contains detailed information regarding
the functionality, installation and operation of your high-
performance capacitor.
INSTRUCTIONS FOR DISPOSAL
In accordance with European Directive 2002/96/EC all
electrical and electronic appliances must be disposed of
separately via local collection points. Please observe the
local regulations and do not dispose of your old appliances
with normal household waste.
1. IMPORTANT SAFETY PRECAUTIONS
This high-performance capacitor complies with the
requirements of the Automotive Directive for use in
vehicles within the European Union and therefore has
E-type approval.
The high-performance capacitor should only be connected
to the vehicle‘s 12 V electrical system by qualified
personnel with the utmost care. If the capacitor short
circuits or there are short circuits in the vehicle, it can
result in a dangerously high current being generated.
CAUTION:
If you hear a warning tone, disconnect the
capacitor from the power supply IMMEDIATELY!
If the capacitor is operated for longer than 10
seconds with reverse polarity, there is a risk of
explosion and injury!
• The vehicle‘s electronic system and any integrated
electronic devices can be damaged as a result of
incorrect polarity. In addition, electrolyte can leak and
damage or contaminate your vehicle. Electrolyte is
harmful to your health and must not be swallowed.
• The capacitor will only operate correctly if it is connected
in accordance with these installation instructions.
• Always refer to the manual for correct installation
and connection and/or for charging/discharging the
capacitor.
• The safety requirements for load-bearing body parts, the
regulations of the Road Traffic Act and the regulations
of the corresponding vehicle manufacturer must be
observed without fail.
4
3
1
2
5
6
Wir gratulieren Ihnen! Durch Ihre kluge Wahl sind Sie Besitzer eines
Magnat-Produktes geworden. Wir gewähren Ihnen für dieses Produkt 2 Jahre
Gewährleistung.
Unsere Produkte werden während des gesamten Fertigungsvorganges laufend
kontrolliert und geprüft. Im Servicefall beachten Sie bitte folgendes:
1. Die Gewährleistungszeit beginnt mit dem Kauf des Produktes und gilt nur für
den Erstbesitzer.
2. Während der Gewährleistungszeit beseitigen wir etwaige Mängel, die
nachweislich auf Material- oder Fabrikationsfehler beruhen, nach unserer
Wahl durch Austausch oder Nachbesserung der defekten Teile. Weitergehende
Ansprüche, insbesondere auf Minderung, Wandlung, Schadenersatz oder
Folgeschäden sind ausgeschlossen.
3. Am Produkt dürfen keine unsachgemäßen Eingriffe vorgenommen worden
sein.
4. Bei Inanspruchnahme der Gewährleistung wenden Sie sich bitte zunächst an
Ihren Fachhändler. Sollte es sich als notwendig erweisen, das Produkt an uns
einzuschicken, so sorgen Sie bitte dafür, dass • das Produkt in einwandfreier
Originalverpackung verschickt wird, • die Kaufquittung beigefügt ist.
5. Von der Gewährleistung ausgenommen sind: • Leuchtmittel • Verschleißteile
• Transportschäden, sichtbar oder unsichtbar (Reklamationen für solche
Schäden müssen umgehend bei der Transportfirma, Bahn oder Post eingereicht
werden.) • Kratzer in Metallteilen, Frontabdeckungen u.s.w. (Diese Defekte
müssen innerhalb von 5 Tagen nach Kauf direkt bei Ihrem Händler reklamiert
werden.) • Fehler, die durch fehlerhafte Aufstellung, falschen Anschluss,
unsachgemäße Bedienung (siehe Bedienungsanleitung), Beanspruchung oder
äußere gewaltsame Einwirkung entstanden sind. • Unsachgemäß reparierte
oder geänderte Geräte, die von anderer Seite als von uns geöffnet wurden.
• Folgeschäden an fremden Geräten • Kostenerstattung bei Schadensbehebung
durch Dritte ohne unser vorheriges Einverständnis. • Batterien und Akkus.
Congratulations! You have made a wise selection in becoming the owner
of a Magnat product. We grant a 2-years warranty for this product.
The equipments are checked and tested continously during the entire production
process. In case you have problems with your Audiovox equipment, kindly
observe the following:
1. The guarantee period commences with the purchase of the component and is
applicable only to the original owner.
2. During the guarantee period we will rectify any defects due to faulty material
or workmanship by replacing or repairing the defective part at our discretion.
Further claims, and in particular those for price reduction, cancellation of sale,
compensation for damages or subsequential damages, are excluded.
3. Unauthorized tampering with the equipment will invalidate this guarantee.
4. Consult your authorized dealer first, if guarantee service is needed. Should it
prove necessary to return the component to the factory, please insure that • the
component is packed in original factory packing in good condition • your enclose
your receipt as proof of purchase.
5. Excluded from the guarantee are: • Illuminates • Wear parts • Shipping
damages, either readily apparent or concealed (claims for such damages must
be lodged immediately with forwarding agent, the railway express office or post
office). • Scratches in cases, metal components, front panels, etc. (You must
notify your dealer directly of such defects within three days of purchase.) •
Defects caused by incorrect installation or connection, by operation errors (see
operating instructions), by overloading or by external force. • Equipments which
have been repaired incorrectly or modified or where the case has been opened
by persons other than us. • Consoquential damages to other equipments. •
Reimbursement of cools, without our prior consent, when repairing damages by
third parties • Batteries and battery packs.
G
ewährleistunGskarte
w
arranty
C
ard
Serien-Nr./Serial-No.
Name und Anschrift des Händlers/Stempel
Name and address of the dealer/stamp
Käufer/Customer
Nur gültig in Verbindung mit Ihrer Kaufquittung!
No warranty without receipt!
Valable seulement sur présentation d‘une preuve d‘achat.
Kaufdatum/buying date/date d‘achat
Magnat Audio-Produkte GmbH
Lise-Meitner-Str. 9 • D-50259 Pulheim • Germany
Tel. +49 (0) 2234 / 807 - 0 •
Fax +49 (0) 2234 / 807 - 399
Internet: http://www.magnat.de
You can find this manual in additional languages at:
www.magnat.de.