Summary of Soundforce 1200
Page 1
Soundforce 1200 soundforce 1200 user's manual version 1.0
Page 2
Soundforce 1200 blank page.
Page 3: Copyright
Soundforce 1200 copyright without the written consent of the manufacturer it is prohibited to reproduce or transfer any part of this manual in any format, either electronically or mechanically, as photocopy or recording, in information or search systems other than for personal use by the purchaser. ...
Page 4
Soundforce 1200 blank page.
Page 5: Contents
Soundforce 1200 contents 1. Introduction.................................................................................... 1 2. Safety first..................................................................................... 2 3. Connection............................................................
Page 6
Soundforce 1200 blank page.
Page 7: 1. Introduction
Soundforce 1200 1 1. Introduction this user’s manual is intended for users of the soundforce 1200 speaker system. These speakers are designed for use in combination with a multimedia computer system. No specific prior knowledge is needed to install and use the soundforce 1200 system. This user’s man...
Page 8: 2. Safety First
Soundforce 1200 2 2. Safety first please read the following instructions carefully: 1. Remove the plugs from the sockets before cleaning the speakers. Do not use liquid cleaning agents or spray cans. Wipe off the speakers with a damp cloth. 2. Do not use the speakers near water, for example, near a ...
Page 9: 3. Connection
Soundforce 1200 3 3. Connection the speakers are easy to connect since all cables are supplied. Follow the instructions as shown in figure 1. With most computers the best sound is delivered by using your computer’s “line-out” output. If your computer does not have a “line-out” output or if the sound...
Page 10: 4. Operation
Soundforce 1200 4 4. Operation warning: first turn the volume control to a low setting before you switch the soundforce speakers on. Switching on at too high a volume can cause damage to your hearing. 1. Switch the speakers on. The on/off lamp lights up. 2. Have your computer produce some sound (for...
Page 11: 5. Troubleshooting
Soundforce 1200 5 5. Troubleshooting the table below is intended to enable you to find a simple remedy for possible problems with the soundforce 1200 speakers. If you are unable to solve the problem, contact the trust helpdesk or your dealer. Problem possible cause solution no sound is coming out of...
Page 12
Soundforce 1200 6 problem possible cause solution the sound coming from the speakers is of poor quality. The controls are incorrectly set. Adjust the bass, treble and volume controls as required. 3d switched on in both the computer and the speakers. Use either the 3d function of your computer or of ...
Page 13
Soundforce 1200 7 appendix a: technical specifications • pmpo power 400 watts (2 x 5 + 20 watts rms) • magnetically shielded for safe location next to the monitor • integral stereo amplifier • controls for volume, 3d, treble and bass • subwoofer with bass reflex design to boost low-frequency sound •...
Page 14
Soundforce 1200 8 blank page.