Magnavox 15MF200V Quick Use Manual

Quick-Use Guide

Cable Box with RF In/Out Jacks

This connection will not supply Stereo sound to the LCD TV Monitor.  The sound from the Cable

Box will be monaural (single-channel, not left and right).

1

Connect the Cable TV signal to the IN jack (or RF IN or CABLE IN) on the Cable

Box. 

2

Connect an RF coaxial cable (not supplied) to the OUT jack (or TO TV or RF OUT)

of the Cable Box.

3

Connect the other end of the coaxial cable to the TV jack on the LCD TV Monitor.

Screw it down finger tight. 

4

Set the Channel 3/4 (or Output channel) switch of the Cable Box to 3 or 4.  Set the TV to

the same channel.  When watching TV programming, change channels at the Cable Box,

not the LCD TV Monitor.

TO TV

CABLE

IN

3

1 2

OUTPUT

CH

3          4

DC IN

ANALOG

AUDIO OUT

        TV

S-VIDEO

VIDEO 

AUDIO

1          2

TV

There are several ways to connect your new LCD TV Monitor to your other

equipment.  This Quick-Use Guide shows the easiest most common connection.

Cable TV signal from

the Cable Company

75

Ω

Coaxial

Cable

75

Ω

jack on rear

of  Television

NOTE: To see how to make other connections, please refer to the Owner’s

Manual.