Magnavox 26MD251D - 26" Lcd Hd Flat Tv Software Manual - page 3
Software History
R18
Following problem is solved :
Problems of "audio drops". Problems: a) If the stereo decoder (DemDec) of the Sound DSP is working in automatic standard
detection (ASD) mode, and a certain test TV signal is applied, a DSP firmware error may cause that the sound output remains
muted.b) With M mono reception, sometimes the detected standard is incorrectly returned as "M Korea" standard.
Change HDMI behavior as MMD requirement behaviors as following:
i. Default preset at "AV1"
ii. Plug in HDMI and AV1 and both play normal by "source" selection.
iii. When enter main OSD menu to select " Analog audio" to HDMI, audio still from HDMI and never cause swap audio
output (HDMI to AV1 or AV1 to HDMI).
If unplug HDMI then audio switch to AV1, plug in HDMI the audio switch back to HDMI audio but the osd menu did not change
automatically.
Following problem is solved :
R21