Magnavox 27MS5402 Quick Use And Setup Manual - page 3
H
OOKING
U
P THE
T
ELEVISION
3
POWER
SLEEP
A/CH
STATUS/EXIT
CC
CLOCK
RECORD
TV
VCR
ACC
SMART
SMART
SMART
SMART
SMART
SMART
SOUND
PICTURE
MENU
MENU
SURF
SURF
VOL
VOL
CH
CH
MUTE
MUTE
1
2
3
4
5
6
7
8
9
0
TV/VCR
C
omponent Video inputs provide for the highest possible color
and picture resolution in the playback of digital signal source
material, such as with DVD players. The color difference signals
(Pb, Pr) and the luminance (Y) signal are connected and received
separately, which allows for improved color bandwidth informa-
tion (not possible when using composite video or S-Video connec-
tions).
1
Connect the Component (Y, Pb, Pr) Video OUT
jacks
from the DVD player (or similar device) to the (Y, Pb, Pr)
in(put) jacks on the TV. When using the Component Video
Inputs, it is best not to connect a signal to the AV1 in Video
Jack.
2
Connect the red and white AUDIO CABLES
to the
Audio (left and right) output jacks on the rear of the acces-
sory device to the Audio (L and R) AV1 in Input Jacks on
the TV.
3
Turn the TV and the DVD (or digital accessory device)
ON.
4
Press the CH+ or CH- buttons
to scroll the available
channels until CVI appears in the upper left corner of the
TV screen.
5
Insert a DVD disc into the DVD player and
press the
PLAY
button on the DVD Player.
C
OMPONENT
V
IDEO
I
NPUTS
The description for the component video connectors may differ depending on the DVD player or accessory
digital source equipment used (for example, Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr, Cb). Refer to your DVD or dig-
ital accessory owner’s manual for definitions and connection details.
H
ELPFUL
H
INT
T
he TV’s audio/video input jacks are for direct picture and
sound connections between the TV and a VCR (or similar
device) that has audio/video output jacks. Both the AV1 and AV2
Input Jack connections are shown to the right, but either one can be
connected alone. Follow the easy steps below to connect your acces-
sory device to the AV1 and AV2 in Jacks located on the back of the
TV.
1
Connect the VIDEO (yellow) cable
to the VIDEO
AV1 in
(or AV2 in) jack on the back of the TV.
2
Connect the AUDIO (red and white) cables
to the
AUDIO (left and right)
AV1 in
(or AV2 in) jacks on the
rear of the TV.
3
Connect the VIDEO (yellow) cable
to the VIDEO OUT
jack on the back of the VCR (either one or two) or acces-
sory device being used.
4
Connect the AUDIO (red and white) cables
to the
AUDIO (left and right) OUT jacks on the rear of the VCR
(either one or two) or accessory device being used.
5
Turn the VCR (either one or two) or accessory device
and the TV ON.
6
Press the CH+ or CH- buttons
on the remote to scroll the
channels until AV1 channel appears for accessory device
number one, or the AV2 channel appears for accessory
device number two. AV1 or AV2 will appear in the upper
left corner on the TV screen depending on the channel cho-
sen.
7
With either of the VCRs (or accessory devices) ON and a
prerecorded tape (CD, DVD, etc.) inserted,
press the
PLAY button
to view the tape on the television.
AV1 & AV2 I
NPUTS
POWER
SLEEP
A/CH
STATUS/EXIT
CC
CLOCK
RECORD
TV
VCR
ACC
SMART
SMART
SMART
SOUND
PICTURE
MENU
SURF
VOL
CH
MUTE
1
2
3
4
5
6
7
8
9
0
TV/VCR
Note:
The Audio/Video cables needed for this connection are not supplied with your TV. Please contact
your dealer orMagnavox at 800-705-2000 for information about purchasing the needed cables.
c
C
HECK
I
T
O
UT
AUDIO IN
(RED/WHITE)
VCR TWO (or accessory device)
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
VIDEO IN
(YELLOW)
BACK OF VCR 1
BACK
OF TV
AV1
Connection
AV2
Connection
VCR ONE (or accessory device)
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
AUDIO CABLES
(RED/WHITE)
COMPONENT
VIDEO CABLES
(Green, Blue, Red)
BACK OF TV
ACCESSORY DEVICE
EQUIPPED WITH COMPO-
NENT VIDEO OUTPUTS.
The CVI connection will be dom-
inate over the AV1 in Video
Input. When a Component Video
Device is connected as described,
it is best not to have a video sig-
nal connected to the AV1 in
Video Input jack.
BACK OF VCR 2
AUDIO IN
(RED/WHITE)
VIDEO IN (YELLOW)
T
he S(uper)-Video connection on the rear of the TV can provide
you with better picture detail and clarity for the playback of
accessory sources than the normal antenna picture connections.
NOTE:
The accessory device must have an S-VIDEO OUT(put)
jack in order for you to complete the connection on this page.
1
Connect one end of the S-VIDEO CABLE
to the S-
VIDEO jack on the back of the TV. Then connect one end
the AUDIO (red and white) CABLES to the AV2 in
AUDIO L and R(left and right) jacks on the rear of the TV
.
2
Connect other end of the S-VIDEO CABLE
to the S-
VIDEO OUT jack on the back of the VCR. Then connect
the other ends of the AUDIO (red and white) CABLES to
the AUDIO (left and right) OUT jacks on the rear of the
VCR.
3
Turn the VCR and the TV ON.
4
Press the CH+ or CH- buttons
on the remote to scroll the
channels until AV2 appears in the upper left corner of the
TV screen.
5
Slide the TV/VCR/ACC Mode Switch
on the remote con-
trol to VCR to select the VCR accessory.
6
Now your ready to place a prerecorded video tape in the
VCR and
press the PLAY
button.
S-V
IDEO
I
NPUTS
AV2
POWER
POWER
SLEEP
A/CH
STATUS/EXIT
CC
CLOCK
RECORD
TV
VCR
ACC
SMART
SMART
SMART
SOUND
PICTURE
MENU
MENU
SURF
SURF
VOL
VOL
CH
CH
MUTE
MUTE
1
2
3
4
5
6
7
8
9
0
TV/VCR
The S-VIDEO and VIDEO
AV2 in(puts) are in parallel.
The S-VIDEO input is domi-
nant when in use. If separate
video signals are connected to
the S-VIDEO and VIDEO
AV2 in(puts), the signal from
the VIDEO AV2 in(put) will
not be usable.
Note:
The S-Video and Audio
cables needed for this connec-
tion are not supplied with your
TV. Please contact your dealer
or Magnavox at 800-705-2000
for information about purchas-
ing the needed cables.
H
ELPFUL
H
INT
AUDIO CABLE
(RED/WHITE)
VCR
(EQUIPPED WITH
S-VIDEO JACKS)
S-VIDEO
CABLE
BACK OF VCR