Magnavox 28ME304V Owner's Manual - page 7
4 Use your TV
Watching Channels from an External
Device
1
Turn On a Set-top Box or the Connected Device.
●
The picture from the Set-top Box or the Connected Device
might appear Automatically on the TV screen.
If the picture does not appear
① Press SOURCE Repeatedly to select the Set-top Box or the
Connected Device and wait a few seconds till the Picture
appears.
② Use the Remote Control of the Set-top Box or the Connected
Device to select Channels to view.
Switching Audio Mode
Digital TV Operation
1
Press SAP to display the currently
selected Language and the number of
available Languages.
2
Press SAP Repeatedly to cycle
through the available Audio Languages.
11.1
1/3
English
O
Note(s)
●
Available Languages differ depending on the Broadcast.
●
Other is displayed when the Audio Language cannot be found
or available Languages are other than English, French or Spanish.
Cable / NTSC (Analog) TV Operation
1
Press SAP to display the currently selected Audio mode.
2
While receiving an MTS broadcast,
press SAP Repeatedly to cycle
through the available Audio Channels.
11
SAP / STEREO
Changing Picture and Sound Settings
You must set Home in Location. L p. 10
Otherwise, personalized Picture and Sound settings will not
be memorized after the Unit goes into Standby Mode.
Changing Picture Settings
1
Press MENU and use HI to select Picture, then press OK.
18
50
30
30
0
2
USB
Language
Features
Setup
Sound
Picture
Personal
Advanced settings
Sharpness
Tint
Color
Brightness
Contrast
Backlight
Auto picture
2
Use HIJK to select the item you want to adjust,
then press OK.
Auto picture
to select the desired Setting, then press OK
(Personal, Standard, Vivid, Sports, Movie, Game
and Eco)
J
Cursor
Cursor K
Backlight
to Reduce Power
Consumption and
Brightness
to Increase Power
Consumption and
Brightness
Contrast
to Decrease Contrast
to Increase Contrast
Brightness
to Decrease
Brightness
to Increase Brightness
Color
to Decrease Color
Intensity
to Increase Color
Intensity
Tint
to Add Red
to Add Green
Sharpness
to Soften
to Sharpen
Advanced settings
to Select the desired Setting, then press OK.
(Color alignment, Noise reduction,
Ambient light sensor
*1
, Black stretch,
Dynamic contrast, Gamma, Film mode
*1
and
BMR 120
*2
)
O
Note(s)
●
Adjusts Backlight for the Best Picture Quality by Dynamically
Adjusting the Backlight Intensity in accordance with the Room
Lighting Condition when Ambient light sensor
*1
is Set to On.
Please ensure the Room Lighting is Stable and the Light Sensor
is Not Blocked.
*1
Only Models 55ME314V / 50ME314V / 40ME314V /
40ME324V / 39ME313V/F7 A.
*2
Only Models 55ME314V / 50ME314V / 40ME314V /
40ME324V.
7
Continued on next page.
English