Magnavox MCS235 User Manual - page 8
Programming track numbers
You may store up to 20 tracks (MP3: 10
tracks) in the desired sequence. If you like,
store any track more than once.
1
In the stop position, press PROG. to
activate programming.
➜ P01 and PROG flashes (See 3).
2
Press
∞ or § to select your desired track
number.
For MP3-CD: First press ALBUM
43
once or more to find your album.
3
Press PROG. to store the desired track
number.
➜ “P02“ flashes for you to program the
next track.
4
Repeat steps 2 to 3 to select and store all
desired tracks in this way.
➜ If you attempt to store more than 20
tracks (MP3: 10 tracks), no track can be
selected and the display shows flashing
---.
5
To play your program, press
2;.
➜ PROG is displayed during playback.
Helpful hints :
–
When playback of your program comes
to the stop position, your set will return
to normal playback.To re-enter program
mode, press PROG. in the stop position.
Erasing a program
You can erase the contents of the memory
by:
– pressing
9 (twice during playback or once
in the stop position);
– selecting TUNER/AUX /OFF;
– opening the CD door.
Different play modes
(See
4)
You can play the current track or the whole
disc repeatedly, and combine REPEAT
modes with PROG (PROGRAM).
REPEAT – plays the current track
continuously.
REPEAT ALL – plays the entire
disc/program continuously.
RAND – plays all tracks in random order.
For MP3 only:
REP. ALBUM – all tracks of current album
play repeatedly.
1
To select play mode, press MODE once or
more.
2
Press
2; to start playback if in the stop/pause
position.
3
To select normal playback, press MODE
repeatedly until the various modes are no
longer displayed.
– You can also press
9 to cancel your play
mode.
Note:
– Selection of shuffle mode is not available in
the program mode.
MP3-CD/ CD Player