Magnavox MDV411 Quick Use Manual

Other manuals for MDV411: Owner's Manual

Manual is about: Philips OWNER'S MANUAL DVD Player MDV411SL, MDV421SL

Page of 2

Download

Bookmark us

There are many ways to connect your new DVD Player to your Television and other equipment.This Quick Use

Guide shows the easiest, most common connection between the DVD Player and a TV using the supplied

cables.

Higher quality connections are explained in the accompanying owner’s manual and will provide better sound or

picture if your TV and/or audio system is compatible.

Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you

have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.

Connect the yellow VIDEO (VIDEO OUT) jack of the DVD Player to the corresponding VIDEO IN jack on

your TV. Use the supplied video cable, which has yellow ends. On the TV, the Video In jack is usually yellow and might be

labeled video, CVBS, composite, or baseband.

Connect the supplied audio cable to the red and white AUDIO OUT (left and right) jacks on the DVD

Player and to the left/right AUDIO IN jacks on the TV. The supplied audio cable has red and white ends. Match

the cable colors to the jack colors. On the TV, the Audio In jacks are usually labeled Audio.The red jack is the right

(stereo channel) and the white jack is the left (stereo channel).

Plug the power cords of the DVD Player and the TV into an active power outlet. Press the STANDBY-ON

button on the front of the DVD Player to turn on the DVD Player.

Turn on the TV power. Set the TV to the correct Video In channel. Such channels may be called AUX or AUX-

ILIARY IN, AUDIO/VIDEO or A/V IN, EXT1 or EXT2 or External In, etc.These channels are often near channel 00. See

your TV manual for details. Go to your lowest TV channel (01 or 02), then change TV channels downward until you see

the Player's screen saver on the TV.

Remember...

●

Connect the DVD Player directly to the TV. For example, do not connect the DVD Player to a VCR, then connect the VCR to

a TV.This type of connection may distort the picture and sound or give you a black and white picture. Also, your VCR might

have the copy protection system, which could distort the DVD image or prevent playback of some Discs.

●

If your TV does not have red, white, and yellow Audio and Video In jacks, refer to the owner’s manual for other hookup options. If

your TV only has a single Antenna In or RF In jack, you will need an RF modulator. See the owner’s manual for details.

●

If a DVD does not play properly, please contact Magnavox at 1-800-705-2000 for assistance. Due to the inconsistency of Disc for-

mats provided by various Disc manufacturers, your DVD Player may require a playability enhancement.As DVD technology has

advanced, these enhancements have become both common and easy to complete.

Quick Use Guide

MDV421SL, MDV411SL

3141 015 22791

Page 1
There are many ways to connect your new dvd player to your television and other equipment.This quick use guide shows the easiest, most common connection between the dvd player and a tv using the supplied cables. Higher quality connections are explained in the accompanying owner’s manual and will pro...
Page 2: 3-4
Standby-on 3-4 to simply play a disc, follow these steps. Additional playback features are described in the accompanying owner’s manual. 1 press standby-on on the front of the dvd player to turn on the player. (you can turn on the dvd player by press- ing power 2 on the remote control as well.) 2 tu...