Magnavox MG-MTOH907L Owner's manual

Summary of MG-MTOH907L

  • Page 1

    Owner's manual digital oil filled radiator heater with remote control item no.: mg-mtoh907l 120v ~ 60hz 1500w.

  • Page 2

    Important safety instructions when using electrical appliances, follow basic safety precautions to reduce the risk of fire, electrical shock, personal injury and property damage. Read all safety precautions, and familiarize yourself with this manual prior to use. Warning: use your heater only as des...

  • Page 3: Parts of The Heater

    Parts of the heater parts of the heater 1. Oil fins (x7) 2. Carry handle 3. Display 4. Control panel 5. Power cord housing 6. Rolling casters do not open or refill/change oil fins oil fins are permantly sealed and do not require refilling or oil changing. Attempting to open fins will damage the unit...

  • Page 4: Instructions

    Instructions placement of the heater pre-operation instructions note: the power cord has a polarized plug (with one blade wider than the other) that will only fit in a polarized outlet one way. If it does not insert easily try reversing the plug. If it still does not fit contact your electrician to ...

  • Page 5: Setting The Temperature

    Setting the timer. Controls on remote control • : press this button after plug in to power on the heater and start operation, or press it repeatedly to stop operation and set the heater into standby mode. • power: use this button to set the power level. • timer : use this button to set the timer. • ...

  • Page 6: Clean And Maintenance

    Example: it is now 4pm. The heater is on and you want it to shut off at 11pm automatically. Set the timer-off function to 7 hours: the heater will cycle on and off to maintain the set temperature. It will stop operating at 11pm and go into standby mode. Clean and maintenance 1. Turn the power contro...

  • Page 7: Troubleshooting

    4. Ensure that both the intake and the exhaust vents are clear of obstructions. 5. Connect the power cord to the electrical outlet. 6. Turn the power control switch to the ‘high’ position, and turn the temperature control switch to the highest setting. 7. If your heater does not operate normally, tu...