Magnavox MGT204D Owner's Manual

Manual is about: COLOR TV/VCR/DVD TRIPLE COMBO (20 inch)

Summary of MGT204D

  • Page 1

    Color tv/vcr/dvd triple combo mgtd204 (20 inch) owner’s manual as an e nergy s tar partner, our company has determined that this product meets the e nergy s tar guidelines for energy efficiency. E nergy s tar is a u.S. Registered mark. ® ® ® if you need additional operating assistance after reading ...

  • Page 2: Important Safeguards

    1.Read instructions-all the safety and operating instructions should be read before the appliance is operated. 2.Retain instructions-the safety and operating instructions should be retained for future reference. 3.Heed warnings-all warnings on the appliance and in the operating instructions should b...

  • Page 3

    - 3 - en 1b15 13.Outdoor antenna grounding-if an outside antenna or cable system is connected to the tv/vcr/dvd, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the national electrical code, ansi/nfpa...

  • Page 4: Precautions

    - 4 - en 1b15 radio-tv interference this equipment has been tested and found to com- ply with the limits for a class b digital device, pur- suant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This e...

  • Page 5: Avoid The Hazards of

    - 5 - en 1c29 avoid the hazards of electrical shock and fire location for safe operation and satisfactory performance of your tv/vcr/dvd, keep the following in mind when selecting a place for its installation: • shield it from direct sunlight and keep it away from sources of intense heat. • avoid du...

  • Page 6: Table Of Contents

    - 6 - en 1c29 table of contents c important safeguards . . . . .2 c precautions . . . . . . . . . . . . . . . .4 location . . . . . . . . . . . . . . . . . . .5 avoid the hazards of electrical shock and fire .5 warning . . . . . . . . . . . . . . . . . . . .5 symbols used in this manual . . . . . . ...

  • Page 7: Features

    - 7 - en 1c29 • hi-fi system– the hi-fi stereo recording system offers you excellent sound quality with a dynamic range of 80db, frequency response from 20hz to 20khz and 0.005% wow and flutter. • rotary 4-head record/playback system– four heads ensure excellent picture quality and special effects p...

  • Page 8

    - 8 - en 1c29 ¡ dolby digital sound this tv/vcr/dvd can handle dolby digital sur- round sound having 5.1 channels when connected to a dolby digital decoder . ¡ still/fast/slow/step playback various playback modes are available including still pictures, fast forward/reverse, slow motion and step fram...

  • Page 9

    - 9 - en 1c29 operating controls and functions 5. Stop button [tv/vcr p.26 / dvd p.37] stops operation of the disc. (or front panel) stops operation of the disc or tape contents. (remote control) 6. Open/close button [dvd p.37] press to insert discs into or remove them from the tray. 7. Disc loading...

  • Page 10

    - 10 - en 1c29 46 48 47 ant. Audio out coaxial 20. Audio l/r input jacks connect to the audio output jacks of a video camera or vcr. 21. Cassette compartment 22. Picture button press to adjust the picture. 23. Number buttons tv mode: [p.15] press two digits to directly access the desired channel. Re...

  • Page 11: Preparation For Use

    - 11 - en 1c29 cable with converter/ descrambler box or satellite box if your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the illustration. By using this connection you can also record scram- bled channels. However, chan...

  • Page 12: Installing The Batteries

    - 12 - en 1c29 to record a scrambled/unscram- bled channel 1. Set the tv/vcr/dvd channel selector to the out- put channel of the cable converter box or satellite box. (ex. Ch3) 2.Select the channel to record from your cable converter box or satellite box. Installing the batteries 1)open the battery ...

  • Page 13

    - 13 - en 1c29 connecting to a stereo amplifier equipped with digi- tal input jacks such as md deck or dat deck (for dvd) use an audio coaxial digital cable available at retail for the audio connections. Connecting to an amplifier equipped with digital input jacks such as md deck or dat deck. Notes:...

  • Page 14

    - 14 - en 1c29 ant. Audio out coaxial front speaker (left) center speaker front speaker (right) surround speaker (left) surround speaker (right) subwoofer to digital audio out (pcm/bitstream) coaxial jack to coaxial digital audio input jack dolby digital decoder [fig. 7] connecting to a dolby digita...

  • Page 15: Set Up For Use

    1 plug in the tv/vcr/dvd power cord plug the tv/vcr/dvd power cord into a standard ac outlet. Note: • if any digits appear in the corner of the screen, press the power button without unplug- ging the power cord. Make sure ... • press the source or select button to select tv/ vcr mode or make sure tv...

  • Page 16

    - 16 - en 1c29 5 select the year press the arrow button k or l until your desired year appears. (example: 2004) then press the arrow button b. 6 select the hour press the arrow button k or l until your desired hour appears. (example: 5, pm) then press the arrow button b. 7 select the minute press th...

  • Page 17: Daylight-Saving Time

    - 17 - en 1c29 daylight-saving time select this feature and the tv/vcr/dvd’s clock automatically will advance one hour in april, then reverse one hour in october. When daylight-saving time is on, the clock will change automatically as follows: • first sunday of april : at 2 am the clock imme- diatel...

  • Page 18: Channel Set Up

    - 18 - en 1c29 channel set up make sure ... • press the power button to turn on the tv/vcr/dvd. 1 select “channel set up” press the setup button on the remote control. Press the arrow button k or l to point to “channel set up”. Then press the enter button. 2 begin auto ch programming press the arrow...

  • Page 19: Tv Operation

    - 19 - en 1c29 tv operation degaussing magnetism from nearby appliances and speakers might affect the color of the tv picture. If this happens, move this tv/vcr/dvd away from the appliance. If the color is still not correct, unplug the power cord, then plug it in again 30 minutes later or so. Tv/vcr...

  • Page 20: Closed Caption System

    - 20 - en 1c29 closed caption system you can view specially labeled (cc) tv programs, movies, news and pre-recorded tapes with either a dialogue caption or text display. Caption mode: by choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents ...

  • Page 21: V-Chip Set Up

    - 21 - en 1c29 5 exit the v-chip setting mode press the setup button on the remote control to exit the screen. V-chip set up make sure ... • tv/vcr/dvd is turned on. 1 select “v-chip set up” press the setup button on the remote control. Press the arrow button k or l to select “v-chip set up”. Then p...

  • Page 22

    - 22 - en 1c29 changing v-chip blocked pro- gramming note: to change the rating, the tv must be turned to a station that is not protected. If the (protected) appears on the screen, please change the channel to a station that is not protected. 1)follow steps [1] and [2]. 2)press the arrow button k or...

  • Page 23: Mts Recording/monitor Mode

    - 23 - en 1c29 mts(multi-channel television sound)system you can record or listen to a program in mts stereo. Checking the selected mts mode when you play a vhs tape, or receive a broadcast on the tv/vcr/dvd tuner channel you are watching, the status shown below will appear when you press the displa...

  • Page 24: Selecting The Mts System

    - 24 - en 1c29 selecting the mts system make sure ... • tv/vcr/dvd power must be turned on. To select hifi mode 1 select “user’s set up” press the setup button on the remote control. Press the arrow button k or l to point to “user’s set up”. Then press the enter button. 2 select “vcr audio” press th...

  • Page 25: Video Cassette

    - 25 - en 1c29 video cassette this tv/vcr/dvd will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. Removing a cassette 1)in the stop mode, press the stop/eject button on the tv/vcr/dvd. The cassette ...

  • Page 26: Playback

    - 26 - en 1c29 playback normal playback make sure ... • tv/vcr/dvd power must be turned on. 1 insert a prerecorded tape if the erase-protection tab has been removed, the tv/vcr/dvd will start playback automatically. 2 to begin playback press the play button. 3 to stop playback press the stop button ...

  • Page 27: Special Playback

    - 27 - en 1c29 special playback this function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 select “user’s set up” press the setup button on the remote control. Press the arrow button k or l to point to “user’s set up”. Then press the enter butto...

  • Page 28: Search

    - 28 - en 1c29 search make sure ... • tv/vcr/dvd power must be turned on. • insert a tape. This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. Note: zero return will not work on a blank tape or a blank portion of a tape. 1 stop a tape ...

  • Page 29: Index Search

    - 29 - en 1c29 index search this feature provides a method of indexing the start- ing point so that it can be easily returned to in either fast forward or rewind mode. • the index mark will be made automatically when the record button is pressed. It will also be marked at the starting point of timer...

  • Page 30: Recording

    - 30 - en 1c29 recording make sure ... • tv/vcr/dvd power must be turned on. • insert a cassette tape with its erase prevention tab in place. (if necessary, rewind or fast forward the tape to the point at which you want to begin recording.) notes: • this tv/vcr/dvd will only record and view the same...

  • Page 31: Otr (One Touch Recording)

    - 31 - en 1c29 • please note that in the slp mode maximum record- ing time, assuming the tape is started at the begin- ning, is 8 hours using t-160 (or 6 hours using t-120). • if the tape runs out before the end time, the tv/vcr/dvd will switch to the stop mode immediately, ejects the tape and turns...

  • Page 32: Timer

    - 32 - en 1c29 timer you may set the tv/vcr/dvd to start and end a recording while you are away. You can set 8 pro- grams to record on specific days, daily or weekly within a 1 year period. In the example below, the timer is being set to record: date: july 4th, 2004 setting time: from 7:30pm to 8:50...

  • Page 33: Timer Program Extension

    - 33 - en 1c29 to shift the time schedule of an automatic timer recording. 1)press the power button. 2)repeat step [1] on page 32. 3)press the record button and select the desired program using the arrow button k or l. 4)press the record button again. Each additional push will shift forward the begi...

  • Page 34: Hints For Automatic

    - 34 - en 1c29 to check the begin/end time 1)press the power button so that the recording indicator goes off. 2)press the setup button on the remote control. 3)confirm “timer programming” is pointed. 4)press the enter button. The details of programs appear on the tv screen. 5)press the setup button ...

  • Page 35: On Screen Display

    - 35 - en 1c29 on screen display to check the counter, clock and channel number on the tv screen, press the display button on the remote control. Each time you press the display button on the remote control, the tv screen will change as follows: when the closed caption mode is off: • counter mode: a...

  • Page 36: Dvd Section

    – 36 – en 01a11 dvd section about the discs disc types the following discs can be played back on this tv/vcr/dvd. ¡ dvd video ¡ dvd-r/rw* ¡ dvd+r/rw* ¡ audio cd ¡ cd-r/rw* ¡ mp3* * depending on the types or the writing method of the medium some discs can not be played. • some dvd-r/rw, dvd+r/rw, or ...

  • Page 37: Playing A Disc

    – 37 – en 01a11 playing a disc basic playback getting started ¡ turn on the power of amplifier and any other com- ponents, if necessary. 1 press the power button. ¡ the power will turn on. 2 press the open/close button to open disc loading tray. 3 place the chosen disc in the tray, with the label fa...

  • Page 38: Step By Step Playback

    – 38 – en 01a11 step by step playback 1 during playback, press the pause button. ¡ playback will pause and sound will be muted. 2 the disc goes forward by one frame each time the pause button is pressed. 3 to exit step by step playback, press the play button. Dvd-v resume 1 during playback, press th...

  • Page 39: Search Function

    – 39 – en 01a11 search function track search there are three ways to begin playback on an audio cd and mp3 at a specific track. Using the number buttons on the remote control 1 press the number buttons to enter the desired track number. ¡ playback will start at the selected track. ¡ for single digit...

  • Page 40: Special Playback Function

    – 40 – en 01a11 special playback function repeat repeat title / chapter to activate the repeat function press the repeat button during playback. ¡ the repeat mode changes as described below every time you press the button. Dvd-v repeat is available only during playback. Chapter title off (current ch...

  • Page 41: Playing A Mp3 Disc

    – 41 – en 01a11 playing a mp3 disc when a cd with mp3 files is in the tv/vcr/dvd, press the disc menu button to call up the mp3 menu on the tv screen. 1 in stop mode, press the arrow button ( k / l ) to select the desired group or track. ¡ if a group is selected press the arrow button b or the enter...

  • Page 42: Changing The Settings

    – 42 – en 01a11 changing the settings audio language the tv/vcr/dvd allows you to select a language during dvd disc (if multi languages are available) playback. 1 press the audio button during playback. 2 press the audio button repeatedly to select your desired language. Note ¡ pressing the audio bu...

  • Page 43: The On-Screen Information

    – 43 – en 01a11 for dvd-vs 1 press the display button during playback to show current chapter. ¡ the elapsed and remaining playing time of the current chapter will be displayed. 2 press the display button again to show current title. ¡ the elapsed and remaining playing time of the cur- rent title wi...

  • Page 44: Language Setting

    – 44 – en 01a11 changing the dvd setup items language setting language options are not available with some discs. 1 press the setup button twice in stop mode so that the dvd setup menu appears. ¡ if the menu does not appear, press the play button and the stop button then the setup button twice. 2 pr...

  • Page 45: Audio Settings

    – 45 – en 01a11 audio settings choose the appropriate audio settings for your equip- ment as it only affects during the playback of dvd discs. 1 press the setup button twice in stop mode so that the dvd setup menu appears. ¡ if the menu does not appear, press the play button and the stop button then...

  • Page 46: Parental Control

    – 46 – en 01a11 – 46 – control levels ¡all all parental lock is cancelled. ¡level 8 dvd software of any grade (adult/general/children) can be played back. ¡levels 7 to 2 only dvd software intended for general use and children can be played back. ¡level 1 only dvd software intended for children can b...

  • Page 47: Troubleshooting Guide

    – 47 – en 01a11 sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money. Tv/vcr mode troubleshooting guide problem corrective action no picture and sound...

  • Page 48

    – 48 – en 01a11 closed caption problem possible remedy my tv/vcr/dvd is showing • you are watching a live broadcast and spelling errors made by the captions that are misspelled. • closed captioning production company may pass through uncorrected. • a prerecorded program will not show any misspelled ...

  • Page 49

    – 49 – en 01a11 notes: • some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s manual for details on correct operations. • playback from a desired track and random playback are not available during program playback. Problem corrective...

  • Page 50: Disc Handling

    – 50 – en 01a11 en 01a11 cabinet cleaning • wipe the front panel and other exterior surfaces of the tv/vcr/dvd with a soft cloth immersed in lukewarm water and wrung dry. • never use a solvent or alcohol. Do not spray insec- ticide liquid near the tv/vcr/dvd. Such chemi- cals may cause damage and di...

  • Page 51: Specifications

    – 51 – en 01a11 crt 20 inch in-line gun, 90˚ deflection tube television system : ntsc-m closed caption system :§15.119/fcc video heads : rotary four-head tape width : 1/2 inch tape speed sp : 33.40mm/sec. Lp : 16.67mm/sec. Slp : 11.12mm/sec. Tuner channel tv vhf low : #2~#6 tv vhf high : #7~#13 tv u...

  • Page 52

    Printed in china 0emn02505 t1009ck ★★★★★ limited warranty funai corp. Will repair this product, free of charge in canada in the event of defect in materials or workmanship as follows: duration: parts: funai corp. Will provide parts to replace defective parts without charge for one (1) year from the ...

  • Page 53: Mgtd204

    Ensemble tÉlÉviseur/magnÉtoscope/dvd couleur mgtd204 (de 20 pouces) guide d’utilisation en tant que partenaire de energy star notre société a conclu que ce produit répond aux normes d'économie énergétique de energy star. Energy star est une marque déposée aux États unis. ® ® ® accessoires avec l’app...

  • Page 54

    1.Lisez les instructions-veuillez lire toutes les instructions relatives à la sécurité et au fonctionnement avant d’utiliser l’appareil. 2.Conservez les instructions-les instructions sur la sécurité et le fonctionnement doivent être conservées pour consultation ultérieure. 3.Respectez les avertissem...

  • Page 55

    - 3 - fr 1b15 13.Mise à la terre de l’antenne extérieure-si une antenne extérieure ou un réseau câblé est connecté sur l’appareil de téléviseur/magnétoscope/dvd, vérifiez si l’antenne ou le réseau câblé est mis à la terre afin de protéger contre les poussées momentanées de tension et l'accumulation ...

  • Page 56: Précautions

    - 4 - fr 1b15 interfÉrences tÉlÉ-radio cet appapreil a été essayé et déclaré conforme aux prescriptions sur les dispositifs numériques de classe b, conformément à la partie 15 du règlement du fcc. Ces prescriptions ont pour but de protéger correctement les installations domestiques contre les interf...

  • Page 57: Pour Éviter Les Risques

    - 5 - fr 1c29 pour Éviter les risques d’Électrocution et d’incendie emplacement pour que votre appareil de télévision/magnétoscope/dvd fonctionne de façon satisfaisante et sûre, rappelez-vous ce qui suit lorsque vous choisissez où l’installer: • protégez-le de la lumière solaire directe et éloignez-...

  • Page 58: Table Des Matières

    - 6 - fr 1c29 table des matiÈres c mesures de sÉcuritÉ importantes . . . . . . . . . . . . . . . . .2 c prÉcautions . . . . . . . . . . . . . . . .4 emplacement . . . . . . . . . . . . . . .5 pour Éviter les risques d’Électrocution et d’incendie . . . . . . . . . . . . . . . . . . .5 avertissement ....

  • Page 59: Caractéristiques

    - 7 - fr 1c29 • système hi-fi– le système d’enregistrement hi-fi stéréo offre une excellente qualité sonore avec une etendue dynamique de 80db, une fréquence de réponse de 20hz à 20khz et une fluctuation de 0,005%. • système rotatif d’enregistrement/de lecture à quatre têtes– quatre têtes assurent u...

  • Page 60

    - 8 - fr 1c29 ¡ dolby digital ce lecteur supporte le dolby digital ayant 5.1 canaux lorsqu’il est branché sur un décodeur dolby digital. ¡ lecture fixe/rapide/ralenti/pas à pas plusieurs modes de lecture sont disponibles y compris images fixes, avant/arrière rapide, ralenti et pas à pas. ¡ lecture a...

  • Page 61

    - 9 - fr 1c29 6. Touche open/close (ouvrir/fermer) [dvd p.37] appuyez pour insérer les disques sur le plateau ou les retirer. 7. Plateau 8. Indicateur dvd voyant allumé lors du mode dvd. 9. Touche source appuyez pour passer au mode tÉlÉ/vcr, au mode entrée extérieure ou au mode dvd. 10. Indicateur t...

  • Page 62

    - 10 - fr 1c29 46 48 47 ant. Audio out coaxial 20. Jack d’entrée audio l/r (son g/d) pour brancher aux jacks de sortie de son d’une caméra vidéo ou d’un magnétoscope. 21. Logement de la cassette 22. Touche picture (image) appuyez pour régler l’image. 23. Touches numériques mode télé: [p.15] tapez de...

  • Page 63: Préparation À L’Usage

    - 11 - fr 1c29 cble avec convertisseur/ dÉsembrouilleurou boÎtier satellite si votre câblo-diffuseur vous fournit un convertisseur ou si vous utilisez un système par satellite, vous pouvez utiliser la connexion de base montrée dans l’illustration. En utilisant cette connexion vous pouvez aussi enreg...

  • Page 64: Mise En Place Des Piles

    - 12 - fr 1c29 pour enregistrer une chaÎne brouillÉe/dÉsembrouillÉe 1. Configurez le sélecteur de chaînes téléviseur/magnétoscope/dvd sur la chaîne de sortie du convertisseur du réseau câblé ou sur le boîtier satellite. (exemple. Ch3) 2.Sélectionnez la chaîne que vous voulez enregistrer à partir du ...

  • Page 65

    - 13 - fr 1c29 connexion sur un amplificateur stÉrÉo ÉquipÉ de jacks d’entrÉe numÉriques, magnÉtophone md ou magnÉtophone audionumÉrique À tÊte rotative (uniquement pour le dvd). Utilisez les câbles son numériques coaxiaux en vente dans le commerce pour les connexions son. Connexion sur un amplifica...

  • Page 66

    - 14 - fr 1c29 haut-parleur avant (gauche) haut-parleur central haut-parleur avant (droit) haut-parleur quadriphonique (gauche) haut-parleur quadriphonique (droit) caisson de basse sur le jack de sortie audio (son) numÉrique coaxial (coaxial) (pcm/bitstream) sur le jack d’entrÉe audio (son) numÉriqu...

  • Page 67: Section Télé/vcr

    - 15 - fr 1c29 programmation de l’appareil section tÉlÉ/vcr 1 branchement du cordon d’alimentation du téléviseur/magnétoscope branchez le cordon d’alimentation du téléviseur/magnétoscope sur une prise de courant alternatif conventionnelle. Remarque : • si des chiffres apparaissent dans le coin de l’...

  • Page 68

    - 16 - fr 1c29 4 sélectionner le jour. Appuyer sur directionnelle k ou l jusqu'à ce que le jour souhaité apparaisse. (exemple: 6 → 06). Puis, appuyer sur la touche directionnelle b. 5 sélectionner l'année. Appuyer sur directionnelle k ou l jusqu'à ce que l'année souhaitée apparaisse. (exemple: 2004)...

  • Page 69

    - 17 - fr 1c29 3 commencer “rech. Auto horloge ch.” appuyer sur la touche directionnelle l pour sélectionner “rech. Auto horloge ch.”. Appuyer sur la touche enter. • le téléviseur/magnétoscope /dvd recherche maintenant la station contenant le signal de réglage d'horloge automatique. La recherche du ...

  • Page 70

    - 18 - fr 1c29 À ce stade-ci, nous vous recommandons de programmer tous les canaux que vous êtes en mesure de capter dans votre région. Remarque: la programmation du syntonisateur de cet appareil n’est pas nécessaire lorsque vous utilisez un convertisseur/décodeur du câble ou de l’antenne paraboliqu...

  • Page 71

    - 19 - fr 1c29 canaux ajoutés: bleu clair canaux supprimés: rouge clair 4 effacement (ou ajout) de la mémoire pressez les commandes enter afin d’effacer (ou ajouter) le canal sélectionné. Vous verrez le numéro du canal effacé passer au rouge à l’écran. Cela confirme son effacement de la mémoire. • s...

  • Page 72

    - 20 - fr 1c29 3 ajustement des aspects de l’image ajustez chaque aspect de l’image en utilisant les commandes directionnelle s ou b. S b luminositÉ diminue augmente contraste diminue augmente couleur diminue augmente teinte plus rouge plus vive nettetÉ plus floue plus claire • si une interruption d...

  • Page 73: Réglage Circuit V

    - 21 - fr 1c29 5 exit the v-chip setting mode appuyez sur la touche setup (configuration) de la télécommande pour quitter l’écran. RÉglage circuit v vérifiez que ... • l’appareil de téléviseur/magnétoscope/dvd soit allumé. 1 sélectionnez “rÉglage circuit v” appuyez sur la touche setup (configuration...

  • Page 74

    - 22 - fr 1c29 changement de la programmation barrÉe du circuit v remarque : pour changer la cote, la télé doit afficher une station qui n’est pas protégée. Si (protÉgÉe) s’affiche à l’écran, veuillez changer la chaîne pour une station qui n’est pas protégée. 1)suivez les étapes [1] et [2]. 2)appuye...

  • Page 75

    - 23 - fr 1c29 systÈme mts (son télévision multi-chaînes) vous pouvez enregistrer ou écouter un programme en stéréo mts vÉrification du mode mts sÉlectionnÉ quand vous faites jouer une cassette vhs ou recevez une émission sur le récepteur de l’appareil de téléviseur/magnétoscope/dvd, l’état présenté...

  • Page 76: Sélection Du Système Mts

    - 24 - fr 1c29 sÉlection du systÈme mts vérifiez que ... • l'appareil de téléviseur/magnétoscope/dvd est sous tension. Pour sÉlectionner le mode hifi 1 sélectionnez “rÉglages de l’usager” appuyez sur la touche setup (configuration) de la télécommande. Appuyez sur la touche directionnelle k ou l pour...

  • Page 77: Cassette Vidéo

    - 25 - fr 1c29 cassette vidÉo cet appareil de téléviseur/magnétoscope/dvd fonctionne avec toute cassette qui possède la marque . Pour obtenir les meilleurs résultats, nous recommandons d’utiliser des bandes de qualité supérieure. N’utilisez pas des bandes endommagées ou de mauvaise qualité. Retrait ...

  • Page 78: Lecture

    - 26 - fr 1c29 lecture lecture normale vérifiez que ... • l'appareil de téléviseur/magnétoscope/dvd est sous tension. 1 insérez une cassette comportant un enregistrement. Si la languette de protection contre l’effacement a été retirée, l’appareil de téléviseur/magnétoscope/dvd commencera automatique...

  • Page 79: Lecture Spéciale

    Cette fonction permet d’améliorer la qualité de l’image quand vous faites jouer des cassettes usées comme les cassettes de location 1 sélectionnez “rÉglages de l’usager” appuyez sur la touche setup (configuration) de la télécommande. Appuyez sur la touche directionnelle k ou l pour pointer sur “rÉgl...

  • Page 80: Avant/arrière

    - 28 - fr 1c29 avant/arriÈre la fonction de recherche chronométrique permet d’avancer la bande à la position désirée en indiquant la durée exacte de lecture que vous désirez sauter. Tv/vcr recherche chronomÉtrique remarques: • la recherche chronométrique peut être configurée pour un maximum de 9 heu...

  • Page 81: Recherche Par Indexage

    - 29 - fr 1c29 recherche par indexage cette fonction permet d’indexer le point de départ pour qu’il soit facile d’y retourner en rembobinant ou en faisant jouer en marche avant rapide. • la marque d’indexage s’inscrit automatiquement quand vous appuyez sur la touche record. La marque s’inscrit aussi...

  • Page 82: Enregistrement

    - 30 - fr 1c29 enregistrement vérifiez que ... • l'appareil de téléviseur/magnétoscope/dvd est sous tension. • insérez une cassette dont la languette de prévention d’effacement est en place. (au besoin, rembobiner ou faites l’avance rapide de la bande jusqu’au point où vous désirez commencer l’enreg...

  • Page 83

    Vous pouvez faire des copies des bandes vidéo enregistrées par vos parents et amis pour votre plaisir. Vous ne pouvez pas copier un dvd sur bande vidéo. Branchez votre appareil de téléviseur/ magnétoscope/ dvd et une vcr source (lecture) en suivant le diagramme suivant. 1)insérez la cassette pré-enr...

  • Page 84: Minuterie

    - 32 - fr 1c29 minuterie vous pouvez configurer l’appareil de téléviseur /magnétoscope /dvd pour commencer et terminer un enregistrement quand vous êtes à l’extérieur. Vous pouvez définir 8 programmes à enregistrer pour des jours particuliers, quotidiennement ou hebdomadairement au cours d’une pério...

  • Page 85

    - 33 - fr 1c29 pour déplacer l’horaire d’un enregistrement automatique avec minuterie. 1)appuyez sur la touche power (mise sous tension) 2)répétez l’étape [1] à la page 32. 3)appuyez sur la touche record (enregistrment) et sélectionnez le programme désiré avec la touche directionnelle k ou l. 4)appu...

  • Page 86: Automatique Avec Minuterie

    - 34 - fr 1c29 pour vÉrifier l’heure de dÉbut/de fin 1)appuyez sur la touche power (mise sous tension) pour que l’indicateur recording (enregistrement) s’éteigne. 2)appuyez sur la touche setup (configuration) de la télécommande. 3)confirmez que “prog en diffÉrÉ” est pointé. 4)appuyez sur la touche e...

  • Page 87: Affichage À L’Écran

    - 35 - fr 1c29 affichage À l’Écran dÉsignations des chaÎnes cblÉes si vous êtes un souscripteur de la télé sur câble, les chaînes sont indiquées de 1 à 125. Les câblo-diffuseurs désignent souvent les chaînes avec des lettres ou un combinaison de lettres et de nombres. Veuillez consulter votre câblo-...

  • Page 88: À Propos Des Disques

    – 36 – fr 01a11 À propos des disques cet appareil de téléviseur/magnétoscope/dvd permet de lire les disques suivants. ¡ dvd video ¡ dvd-r/rw* ¡ dvd+r/rw* ¡ cédés musicaux ¡ cd-r/rw* ¡ mp3* * certains disques ne peuvent pas être lus à cause du type et de la méthode de gravure utilisés. • il arrive qu...

  • Page 89: Lecture De Base

    – 37 – fr 01a11 lecture de base pour commencer ¡ au besoin, allumez l’amplificateur et les autres dis- positifs. 1 appuyez sur la touche power. ¡ l’appareil s’allume. 2 appuyez sur open/close pour ouvrir le plateau. 3 placez le disque de votre choix sur le plateau, avec l’étiquette vers le haut. Mp3...

  • Page 90: Lecture Pas-À-Pas

    – 38 – fr 01a11 lecture pas-À-pas 1 appuyez sur la touche pause pendant la lecture. ¡ la lecture s’interrompt et le son est en sourdine. 2 le disque avance d’une image à chaque pression de la touche pause. 3 pour quitter la lecture pas-à-pas, appuyez sur play. Dvd-v reprise 1 appuyez sur la touche s...

  • Page 91: Recherche De Piste

    – 39 – fr 01a11 recherche de piste il y a trois manières de commencer la lecture d’un cédé musical et d’un mp3 à une piste spécifique. À l’aide des touches numériques de la télécommande 1 appuyez sur les touches numériques pour saisir le numéro de la piste voulue. ¡ la lecture commence à partir de l...

  • Page 92: Répéter

    – 40 – fr 01a11 rÉpÉter rÉpÉter le titre / chapitre pour activer la fonction répéter, appuyez sur repeat pendant la lecture. ¡ le mode de répétition change de la façon décrite ci- dessous chaque fois que vous appuyez sur la touche. Dvd-v la fonction repeat n’est disponible que pendant la lecture. Ch...

  • Page 93: Lecture D’Un Mp3

    – 41 – fr 01a11 quand un cédé avec fichiers mp3 est inséré dans l’ap- pareil de téléviseur/magnétoscope/dvd, appuyez sur disc menu pour appeler le menu mp3 sur l’écran du téléviseur. 1 en mode d’arrêt, appuyez sur les touches directionnelles ( k / l ) pour sélectionner le groupe ou la piste souhaité...

  • Page 94: Langue Son

    – 42 – fr 01a11 langue son l’appareil de téléviseur/magnétoscope/dvd vous permet de sélec- tionner une langue pendant la lecture du dvd (si plusieurs langues sont disponibles). 1 appuyez sur la touche audio pendant la lecture. 2 appuyez plusieurs fois sur la touche audio pour sélectionner la langue ...

  • Page 95: Informations À L’Écran

    – 43 – fr 01a11 pour les dvd-v 1 appuyez sur la touche display pendant la lecture pour voir le chapitre en cours. ¡ le temps écoulé et restant du chapitre en cours s’affiche. 2 appuyez encore sur la touche display pendant la lecture pour voir le titre en cours. ¡ le temps de lecture écoulé et restan...

  • Page 96: Configuration De La Langue

    – 44 – fr 01a11 modification des ÉlÉments de configuration du dvd l’option langue n’est pas disponible sur certains disques. 1 appuyez deux fois sur la touche setup en mode stop pour faire apparaître le menu configuration du dvd. ¡ si le menu n’apparaît pas, appuyez encore sur la touche play, sur la...

  • Page 97: Réglages Son

    – 45 – fr 01a11 rÉglages son choisissez le réglage du son adapté à votre appareil parce qu’il affecte seulement la lecture de dvd. 1 appuyez deux fois sur la touche setup en mode stop pour faire apparaître le menu configuration du dvd. ¡ si le menu n’apparaît pas, appuyez encore sur la touche play, ...

  • Page 98: Contrôle Parental

    – 46 – fr 01a11 – 46 – niveaux de contrÔle ¡tout tout le verrouillage parental est effacé. ¡niveaul 8 tous les dvd, de tous les niveaux (adulte/général/enfants), peuvent être lus. ¡niveaux de 7 à 2 seuls les dvd d’usage général ou pour enfants peu- vent être lus. ¡niveau 1 seuls les dvd pour enfants...

  • Page 99

    – 47 – fr 01a11 il arrive qu’un problème de fonctionnement puisse être facilement résolu en vérifiant des possibilités qui semblent évidentes, mais sont parfois ignorées. Avant de faire réparer, vérifier les éléments suivants. Vous pourriez épargner du temps et de l’argent. Mode tÉlÉ/vcr guide de re...

  • Page 100

    – 48 – fr 01a11 problÈme avec le sous- solution possible titrage codÉ ma téléviseur/magnétoscope/dvd • vous regardez une émission en direct et les fautes d'orthographe faites montre des sous-titres mal • par la société de production du sous-titrage codé peuvent passer sans orthographiés. • être corr...

  • Page 101

    – 49 – fr 01a11 remarques: • certaines fonctions ne sont pas disponibles dans certains modes, mais ce n’est pas un dysfonctionnement. Lisez les descriptions de ce manuel de l’utilisateur pour avoir de plus amples détails sur la façon correcte de procéder. • la lecture à partir d’une piste voulue et ...

  • Page 102: Manipulation Des Disques

    – 50 – fr 01a11 nettoyage du boÎtier • essuyez le panneau de commande et les autres sur- faces extérieures de l’appareil de téléviseur/magné- toscope/dvd avec un chiffon imbibé d’eau tiède et séchez-les. • n’utilisez jamais ni solvant ni alcool. Ne vaporisez pas d’insecticide près de l’appareil de t...

  • Page 103: Caractéristiques

    – 51 – fr 01a11 Écran : canon en ligne de 20 pouces, tube à parcours électronique dirigé à 90º système de télé : ntsc-m système de sous-titrage codé : §15.119/fcc têtes vidéo : rotatif à quatre têtes largeur de la bande : 1/2 pouce vitesse de la bande sp : 33,40 mm/seconde lp : 16,67mm/seconde slp :...

  • Page 104

    T1009ck garantie limitÉe funai corp. Réparera ce produit à titre gratuit au canada en cas de défaut de matériau ou de façon comme suit: duree : pieces : funai corp. Fournira les pièces pour remplacer les pièces défectueuses à titre gratuit pendant un (1) an à partir de la date d’achat au détail d’or...