Magnavox MPC220 Quick Use Manual
Quick Use
Guide
Quick Use
Guide
VOL
LINE OUT/
OPEN
See the other side for some important tips.
1
Insert the batteries.
a
Press the OPEN
3
slider to
open the lid.
b
Open the battery compartment
and insert 2 AA batteries.
2
Insert a CD.
Place a CD on the hub and
close the lid. Make sure the
disc is in good condition and
the label is facing up.
3
Connect the Headphones.
Plug the headphones into the
LINE OUT/
;
jack.
!
NOTE:
If the buttons do not respond,
check the RESUME/HOLD/OFF
slider. It should be in RESUME
position to begin with.
4
Start playback.
a
Press PLAY
to start the
CD.
b
Use the VOL
to adjust the
volume.
2
1a
1b
4a
4b
3
!
If “NO DISC” is displayed:
1
The CD might be dirty or scratched.
2
The label might be facing down.
3
The lens might be fogged up. Allow sever-
al minutes for it to clear.
If “NF DISC’ is displayed:
1
The disc is not being recognized by the
CD player.
2
The CD-RW (or CD-R) needs to be final-
ized before the player can play it.
Display
PROG
Press to program
tracks
DBB
Press to turn Bas-
Enhancement on and
off.
Search
¢
Press to search and
skip forward.
Search
4
Press to search and
skip backward.
OPEN
3
Slide to open the CD
player lid.
MODE button
Press to select the Play
mode (Shuffle, Shuffle
Repeat, Shuffle Repeat
ALL, Repeat, Repeat, and
Repeat ALL).
STOP
7
Button
Press to stop playback,
clear a program, or
switch the player off.
PLAY
38
Button
Press to switch the play
on or to begin playback.
RESUME
Switch to store the last
position of a CD track
played.
HOLD
Switch to lock the but-
tons
OFF
Switch to turn off
RESUME and HOLD.
LINE OUT/
;
Connect headphones or
another audio device
here.
VOL
Use to adjust the vol-
ume.
4.5V DC
Connect jack for exter-
nal power supply here.
!
If the Disc does not play, there are several possible reasons.
Quick Use
Guide
Quick Use
Guide
4
4
9
OPEN
VO
L
E
O
FF
•
R
S
U
M
E
•
H
O
LD
O
U
T
LIN
E
/
CLASS
1
LASER
PROD
UCT
MPC220-QUG 7/18/03 5:28 AM Page 1