Magnavox MS3252S Quick Use And Setup Manual - page 3
Y
ou can set the TV’s on-
screen menu to show in
either English or Spanish.
L
ANGUAGE
T
UNER MODE allows you
to change the TV’s signal
input to either ANTENNA,
CABLE, or AUTO. It’s impor-
tant for the TV to know what
type of signal to look for. In
AUTO mode, when AUTO
PROGRAM is activated, the
TV will automatically choose
the correct mode.
T
UNER
M
ODE
3
M
ENU
If you pass the feature you want,
press the MENU button on the
remote to move back through the
menu one screen at a time.
Picture Menu
Sound Menu
Features Menu
Install Menu
H
ELPFUL
H
INT
Remember, the Language control
only makes the TV’s on-screen
menus appear in English or
Spanish.
It does not change the other on-
screen text features, such as
Closed Captioning.
H
ELPFUL
H
INT
S
ETTING
U
P
Y
OUR
T
ELEVISION
F
OR THE
F
IRST
T
IME
Y
ou can adjust TV features in
the on-screen menu (a list
of features that shows on the
TV screen). Some features have
sub-menus, but each MENU
item can be adjusted, activated,
or deactivated by viewing the
screen and pressing the proper
button.
1
Press the MENU button
on the remote to show the
on-screen menu.
2
Press the
or
■ button
on the remote to pick any
of the on-screen menu
features.
3
Press the
or
buttons on the remote to
adjust any highlighted
feature.
4
Press the STATUS/EXIT
button on the remote to
clear the menu from the
screen after an adjustment.
You can also just wait a
few seconds and the menu
will disappear automatical-
ly.
1
Press the MENU button
on the remote to show the
on-screen menu.
2
Press the
or
■ button
to scroll through the menu
until the word INSTALL
is highlighted.
3
Press the
button to
display the INSTALL
menu features.
4
Press the
or
■ button
to highlight LAN-
GUAGE.
5
Press the
button
repeatedly to select
ENGLISH or
ESPANOL (Spanish).
6
When finished, press the
STATUS/EXIT button to
remove the menu.
1
Press the MENU button
on the remote to show the
on-screen menu.
2
Press the
or
■ button
to scroll through the menu
until INSTALL is high-
lighted.
3
Press the
button to
display the INSTALL
menu features.
4
Press
or
■ to highlight
TUNER MODE.
5
Press the
button to
select ANTENNA,
CABLE, or AUTO.
6
When finished, press the
STATUS/EXIT button to
remove the menu.