Magnavox MSB5300 Owner's Manual - page 7
Connecting the Power
AC-DC
Adapter
DC 20V
2 AC pin connector
• Make sure that
the Soundbar is not muted after you Turn the unit On.
Connecting the Subwoofer (MSB5305 only)
Subwoofer
MSB5305 only
AC-DC
Adapter
DC 24V
3 blade connector
• Make sure that
the Soundbar is not muted after you Turn the unit On.
Table top placement
For secure table top placement, affix 2 self-adhesive rubber feet to the
bottom of this unit using the below guide.
.
Wall mounting using brackets
You can use the Wall Mounting Template located in the Quick Start
Guide to mark the Top screw positions. (Mounting Bracket Screws are
not included.)
1
Measure your TV width to find the center, then 3 15/16 from the
center line mark the 2 top screw positions which are 2”(min.) to
2-½”(max.) from the bottom edge of the TV. Then mark the other
4 bottom screw positions using the brackets.
2”
Your TV
3-
15
/
16
”
3-
15
/
16
”
Center line
- 2-½”
2
It is recommended to use drywall Molly anchors that have a
minimum of 5 lbs. holding strength to use with these brackets.
Mount the 2 Mounting Brackets where you marked the six screw
holes for the Molly anchor locations.
Six screw positions
you marked
• Make sure that both brackets are securely mounted to the drywall.
• Make sure that the width of this Soundbar fits your TV screen size
and the power cord / audio cables are securely connected before
wall mounting the Expandable Soundbar.
3
Hook the Soundbar onto Mounting Brackets.
Complete.
7