Magnavox MTFT713 Owner's Manual - page 16
OPERATIONS
Insert the USB Device or SD/MMC memory card into the USB port /card slot as seen in the figure below.
Note: The unit supported to playback:
~ MP3; WMA (Music file)
~ JPG (Pictures)
Make sure correct files were saved in the USB device or memory cards.
AV IN
SD/MMC
~ MPEG2; AVI; VOB (Video files up to 640 x 480 pixels)
2. In Power ON mode, press the USB/CARD Button, the "DVD, CARD, USB" selection window will pop
up on the screen. Using the Direction Buttons to select and highlight the desired source then press
press the ENTER/OK Button to start playback.
3. During playback:
~ Press the or Button repeatedly to skip tracks.
~ Press the Play/Pause Button to pause. Press again to resume.
4. When finished, press the STOP Button to stop. Press the POWER Button to power off
(Standby) the unit.
Notes:
A. Insert the card (Up to 32GB, not included) into the card slot (Make sure contacts are face up).
B. To take out the card, press the card until a “ Click ” is heard then pull out the card.
C. Before replacing the storage card, make sure the unit has been powered off.
D. When inserting the storage card, make sure the direction you selected is correct. Never insert violently
to avoid damaging the card or the unit.
E. When the card is used for the first time, or it has been used in another device,
through a Computer. You also need to download the desired music, photos or movie into the card before
installing into the unit.
ǿ ŻŻ
Ŷ
ǿŻŻ
the ENTER Button on the unit or OK Button on the Remote Control to confirm. Press the ENTER/OK
Folder/File list will appear,
Button again, the
using the Direction Button to select the desired File then
~ Press the / Button on the Remote Control or the / Button on the unit repeatedly to fast search
for a specific section forward/backward.
Note: For saving energy, always power off the player by sliding the Power ON/OFF Switch on the player to
OFF position and unplug the AC/DC Adaptor from wall outlet.
1.
USB OR SD/MMC CARD PLAYBACK
please format it first
If it doesn’t work, please check if the SD card was inserted
correctly.
15