Magnavox MWC20T6 Owner's Manual

Manual is about: 20 inch DVD TRIPLE COMBO

Summary of MWC20T6

  • Page 1

    Owner’s manual mwc20t6 if you need additional assistance for set-up or operating after reading owner’s manual, please call toll free 1-800-605-8610 or visit our web site at http://www.Funai-corp.Com 20 inch dvd triple combo instrucciones en espaÑol includas features • auto channel scanning • timer r...

  • Page 2: Recautions

    En 2 p recautions caution: to reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. Caution risk of electric shock do not open this symbol indicates that dangerous voltage constituting a risk of electric sh...

  • Page 3

    En 3 important copyright information unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by u.S. Patents and other intellec- tual property rights. Use of this copyright protection tech...

  • Page 4

    4 en note about recycling batteries should never be thrown away or incinerated but disposed of in accordance with your local regula- tions concerning chemical wastes. Caution: to prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: pour Éviter les choc Électriques,...

  • Page 5: Able Of Contents

    5 en t able of contents precautions . . . . . . . . . . . . . . . . . . . . . . . . . .2 important safeguards . . . . . . . . . . . . . . . .2 table of contents . . . . . . . . . . . . . . . . . . . .5 symbols used in this manual . . . . . . . . . . . .5 preparation for use . . . . . . . . . . . . ....

  • Page 6: Reparation For Use

    En 6 p reparation for use antenna/cable connections ant. Audio out coaxial ant. In out rear of the unit *note (do not disconnect from box) some cable tv systems use scrambled signals and require a special converter to receive these channels. Consult your local cable company. Or incoming cable from h...

  • Page 7

    En z to coaxial digital audio input jack audio coaxial digital cable (commercially available) to audio out coaxial jack (dvd audio out only) dolby digital decoder audio out coaxial or md deck, dat deck, etc. To coaxial digital audio input jack 7 you can connect this unit to a digital audio device to...

  • Page 8

    En [front panel] 0 1 y y standby-on button [tv/vcr p.9 / dvd p.23] 0 2 volume k / l buttons [p.9] 0 3 h prev / next g buttons [dvd p.26] search e / d buttons [dvd p.23] 0 4 play b button [tv/vcr p.15 / dvd p.23] 0 5 stop c button [dvd p.23] 0 6 open/close a button [dvd p.23] 0 7 disc loading tray 0 ...

  • Page 9: Tv/vcr

    En aux sleep 0 minute bright – p p p p p p p p p p p p p p c c p p p p p p p p p p p p p p + sleep timer setting the sleep timer function is used to turn off the unit without pressing [standby-on y y ] after a desired time. 1 press [picture / sleep] to display the sleep timer menu. 2 within 5 second...

  • Page 10: Tv/vcr

    10 en - tv/vcr setup - timer programming b setting clock channel set up user’s set up v-chip set up language [english] caption [off] zero return time search index search – setting clock – b auto clock [on] auto clock ch search auto clock ch [ 02 ] manual clock set – setting clock – auto clock [on] b...

  • Page 11: Tv/vcr

    - tv/vcr setup - timer programming setting clock channel set up user’s set up v-chip set up language [english] b caption [caption1] zero return time search index search - tv/vcr setup - timer programming setting clock channel set up user’s set up v-chip set up language [english] b caption [off] zero...

  • Page 12: Tv/vcr

    Tv–pg [block] b d [block] l [block] s [block] v [block] tv–y [view] tv–y7 ( ) [view] tv–g [view] b tv–pg (dlsv ) [block] tv–14 (dlsv ) [block] tv–ma ( lsv ) [block] tv–y [view] b tv–y7 ( ) [view] tv–g [view] tv–pg ( ) [view] tv–14 ( ) [view] tv–ma ( ) [view] - tv/vcr setup - timer programming settin...

  • Page 13: Tv/vcr

    G [view] pg [view] pg–13 [view] b r [block] nc–17 [block] x [block] ch 15 no tv signals 13 en - tv/vcr setup - timer programming setting clock b channel set up user’s set up v-chip set up language [english] caption [off] zero return time search index search change access code 4 use the number button...

  • Page 14: N-Screen Display

    On screen display examples are shown below. 1. Vcr status displays the current vcr motion: play / stop / rec / otr / pause / ff / rew 2. Tape speed (during recording) displays the tape speed: sp / slp 3. Clock 4. Channel number (in tv mode) displays the current channel number. "aux" is displayed in ...

  • Page 15: Ideo Cassette

    En v ideo cassette this unit will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. Selecting tape speeds before recording, select the tape speed from : sp mode (standard play) or slp mode (super long ...

  • Page 16: Pecial Playback

    Count 0:00:00 repeat play b - tv/vcr setup - timer programming setting clock channel set up b user’s set up v-chip set up language [english] caption [off] zero return time search index search - tv/vcr setup - timer programming setting clock channel set up b user’s set up v-chip set up language [engl...

  • Page 17: Tv/vcr

    17 en index search 0 3 time search 2 : 50 time search tv/vcr tv/vcr this function allows you to quickly advance the tape to your desired posi- tion simply by entering the exact amount of playback time you want to skip. In the example below: to watch a program before/ after 2 hour 50 minutes from the...

  • Page 18: Ecording

    En 18 r ecording notes: • insert a cassette tape with its erase-prevention tab in place. • this unit cannot record the contents from the built-in dvd. • you can only watch the same tv program that is being recorded. Normal recording tv/vcr tv/vcr sp 1 use [ch. K k / l l ] or the number buttons to se...

  • Page 19: Tv/vcr

    Timer rec standby – timer programming – ch date begin end b 61 7/03 mon 7:30 p m 8:50 p m - - - - -/- - - - - -:- - -:- - - - - - -/- - - - - -:- - -:- - - - - - -/- - - - - -:- - -:- - - - - - -/- - - - - -:- - -:- - - - - - -/- - - - - -:- - -:- - - - – timer programming – ch date begin end b 61 7...

  • Page 20

    – timer programming – ch date begin end b 61 7/03 mon 7:30 p m 8:50 p m sp - - -/- - - - - -:- - -:- - - - - - -/- - - - - -:- - -:- - - - - - -/- - - - - -:- - -:- - - - - - -/- - - - - -:- - -:- - - - - - -/- - - - - -:- - -:- - - - 20 en recording tv/vcr section to correct a program afterward 1 p...

  • Page 21: Tv/vcr

    - tv/vcr setup - timer programming setting clock channel set up b user’s set up v-chip set up language [english] caption [off] zero return time search index search – user’s set up – rental [off] repeat play [off] b auto return [on] 21 en auto return tv/vcr tv/vcr this function allows you to automati...

  • Page 22: Bout The  Discs

    En a bout the discs if you cannot play back a disc which bears one of the marks above, check the following notes. *1: this unit conforms to the ntsc color system. Discs recorded in other color systems such as pal cannot be played back. *2: certain dvd-video discs do not operate as described in this ...

  • Page 23: Laying A Disc

    En 23 about the discs / pla ying a disc d vd section p laying a disc 1 press [standby-on y y ] to turn on the unit. 2 press [open/close a a ] on the unit. 3 place the disc in the tray, with the label facing up. 4 press [play b b ]. • the tray will close automatically and playback will start. When yo...

  • Page 24

    En setting menu switches as below every time you press [mode] during playback. See the reference page for how to set each menu. Some functions are not available in specific modes, but this is not a malfunction. (if available) cd press [mode] audio menu (p25) v.S.S. Menu (p26) search menu (p26) repea...

  • Page 25

    En the zoom function allows you to enlarge the video image and to pan through the enlarged image. 1 during playback, press [mode] repeatedly until zoom menu appears. 2 press [enter] repeatedly to select the required zoom factor. Off zoom1 ( ×1.3) zoom2 ( ×2.0) zoom3 ( ×4.0) 3 use [ k k / l l / s s /...

  • Page 26

    26 en you can adjust the black level to make the black parts of the picture brighter. 1 during playback, press [mode] repeatedly until black level menu appears. 2 use [ k k / l l ] to select "on" or "off". • on: makes the dark parts brighter. Off: shows the original picture as recorded. (initial set...

  • Page 27

    Time search 1 during playback, press [mode] repeatedly until search menu appears. 2 use [ k k / l l ] repeatedly to display time search menu. 3 within 60 seconds, use the number buttons to enter a desired disc time. Playback will start at the specified time. • press [clear] to erase the incorrect in...

  • Page 28: N-Screen Information

    28 en you can determine the playing order of tracks. 1 in the stop mode, press [mode]. • the program screen appears. 2 use [ k k / l l ] to select a track, then press [enter]. Notes: • up to 99 tracks can be entered. • press [clear] to erase the most recently entered track. • if you enter more than ...

  • Page 29

    En 29 c hanging the dvd set up items on-screen informa tion / changing the d vd set up items d vd section 1 in the stop mode, press [set-up] twice to display the dvd setup menu. Notes: • pressing [set-up] once will show tv/vcr setup menu partly. • if the menu does not appear, press [stop c c ] first...

  • Page 30

    En 30 display setting 4 use [ k k / l l ] to select an item, then press [enter]. • tv mode: you can change certain aspects of the dvd display screens and on-screen messages on the tv screen. • 4:3 letter box (default): to show black bars on top and bottom of the screen. • 4:3 pan & scan: to show a f...

  • Page 31

    Others setting 4 use [ k k / l l ] to select an item, then press [enter] repeated- ly to set the feature "on" or "off". • angle icon: • on: to show the angle icon when multiple camera angles are available during dvd playback. (default) • off: to keep angle icon from the display. • auto power off: • ...

  • Page 32: Roubleshooting Guide

    32 en t roubleshooting guide i f the unit does not perform properly when operated as instructed in this owner’s manual, check the following guide for the possible remedy of a problem before contacting the customer service. Sometimes a perfor- mance problem can be easily solved by checking seemingly ...

  • Page 33

    33 en tr oubleshoo ting guide misspelling in captions text is not shown in its entirety or a delay occurs from what is being said captions scrambled with white boxes no captions in a program which must contain closed caption no captions in a pre-recorded videotape with indicated closed captions incl...

  • Page 34: Aintenance

    En disc handling • handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. • always store the disc in its protective case when it is not used. • to clean-off, use a soft cloth. • do not use a hard cloth since this will mar the disc. • wipe the disc in a straight li...

  • Page 35: Ppendix

    Language code list language code mongolian 5960 nauru 6047 nepali 6051 norwegian [nor] 6061 o-r occitan 6149 oriya 6164 oromo(afan) 6159 panjabi 6247 pashto;pushto 6265 persian 5247 polish [pol] 6258 portuguese [por] 6266 quechua 6367 rhaeto-romance 6459 romanian [rum] 6461 russian [rus] 6467 s samo...

  • Page 36: Pecifications

    En 36 general specifications tv/vcr electrical specifications crt: 20 inch in-line gun, 90˚ deflection tube television system: ntsc-m closed caption system: §15.119/fcc video heads: rotary four-head tape width: 1/2 inch tape speed sp: 33.40 mm/sec. Lp: 16.67 mm/sec. Slp: 11.12 mm/sec. Tuner channel ...

  • Page 37

    Conexiones de antena/cable es Índice de contenido / prep ara tiv os p ara el uso ant. Audio out coaxial ant. In out parte trasera de la unidad *nota (no desconectar de la caja) algunos sistemas de tv por cable utilizan señales cifradas y requieren un convertidor especial para recibir estos canales. ...

  • Page 38

    38 es cuando vea un programa grabado en otra fuente (videograbadora o videocámara), utilice las tomas de entrada audio/video en la parte frontal de la unidad. Conecte las tomas de salida de audio/vídeo de otra fuente a las tomas audio l/r y video de esta unidad. A continuación, utilice [select] o [c...

  • Page 39: Sección Tv/vcr

    1 después de finalizar la conexión de la antena o del cable, conecte el cable de alimentación a una toma estándar de ca. 2 presione [standby-on y y ] para encender la unidad. 3 utilice [ch. K / l ] o los botones numéricos para seleccionar el número de canal deseado. 4 utilice [vol. X / y ] para ajus...

  • Page 40: Tv/vcr

    - tv/vcr prep. - como programar ajuste reloj ajuste de canal ajuste de user ajuste de v-chip b idioma [espaÑol] tÍtulo [off] z t i ca 15 no hay seÑal de tv - tv/vcr prep. - como programar ajuste reloj b ajuste de canal ajuste de user ajuste de v-chip idioma [espaÑol] tÍtulo [off] zero return time se...

  • Page 41: Tv/vcr

    41 es r eproducciÓn g rabaciÓn sp grabaciÓn normal tv/vcr tv/vcr 1 utilice [ch. K k / l l ] o los botones numéricos para seleccionar el canal donde se va a grabar. Nota: • si la unidad está conectada a una caja de cable o de satélite, deberá estar en ca3 o ca4. Seleccione en la caja de cable o de sa...

  • Page 42: Tv/vcr

    Prg. Estar listo – como programar – ca fecha inicio final b 61 7/03 lun 7:30 p m 8:50 p m - - - - -/- - - - - -:- - -:- - - - - - -/- - - - - -:- - -:- - - - - - -/- - - - - -:- - -:- - - - - - -/- - - - - -:- - -:- - - - - - -/- - - - - -:- - -:- - - - – como programar – ca fecha inicio final b 61 ...

  • Page 43: Sección Dvd

    43 es secciÓn dvd 1 presione [standby-on y y ] para encender la unidad. 2 presione [open/close a a ] en la unidad. 3 coloque el disco en la bandeja, con la etiqueta hacia arriba. 4 presione [play b b ]. • la bandeja se cerrará automáticamente y se empezará la reproducción. Cuando reproduzca un dvd q...

  • Page 44

    Printed in malaysia 1emn21613 t1202uc ★★★★★ limited warranty funai corp. Will repair this product, free of charge in the usa in the event of defect in materials or workmanship as follows: duration: parts: funai corp. Will provide parts to replace defective parts without charge for one (1) year from ...