Magneplanar® cc3 instruction manual white bear lake, minnesota www.Magnepan.Com.
Magneplanar cc3 owner's manual 1. Introduction / general description..................................................................... 3 2. Carton contents........................................................................................................... 3 3. Packaging.......................
1. Introduction / general description congratulations on your purchase of the magneplanar® cc3 center channel loudspeaker. The magneplanar cc3 was conceived and designed for perfectionists. The cc3 consists of a curved, two-way planar magnetic driver. Due to the elegant simplicity and ruggedness of ...
A) general the cc3 is designed for use on top of a tv, in or on top of a cabinet. For free- standing applications where the cc3 will be set on a speaker stand, call magnepan for special instructions for this type of installation. The cc3 may be placed on top of a tv monitor as shown in figure a. Mag...
C) installation using built-in “t” nuts as shown below, there are 3 “t” nuts built into the top and bottom of the cc3, at the designated locations. These built-in t nuts allow hanging or any other type of installation you may devise. Carefully burn a hole in the cloth with a hot soldering tip or a m...
Attenuation is accomplished by insertion of a simple, non-inductive resistor in series with the tweeter (see figure b). Replace the jumper with the appropriate resistor to obtain the desired tweeter attenuation (typically 1 ohm for most rooms). The 1 ohm resistor provided will attenuate the tweeter ...
10. Specifications system description: curved, two-way planar magnetic dipole loudspeaker midrange radiating area: 155 sq. In. Quasi ribbon tweeter size: 31" x 2-1/2" frequency response: 80hz to 20khz +/- 3db recommended power: see faq on web site at http://www.Magnepan.Com/faq.Php#power sensitivity...
