Series 75 currency counter operator’s manual models : magner 75, 75s, 75u, 75m, 75su, 75sum s u m + accm 0 clr sp star t man auto 1 2 3 4 5 6 7 8 9 0
Table of contents introduction --------------------------------------------------------- 1 1. Safety instructions -------------------------------------------- 2 2. Installation ------------------------------------------------------ 3 3. Parts description ---------------------------------------------...
Introduction this manual covers the installation, maintenance, and troubleshoot- ing of the magner 75 series currency counter. Please read this manual thoroughly before operating the currency counter. 1.
2 1. Safety instructions warnings the currency counter automatically starts operating in certain circumstances. Consequently, it is important to always follow these precautions: 1. Do not wear loose clothing or jewelry while operating the currency counter. 2. Make sure that your hair does not touch ...
75 series currency counter 3 2. Installation unpacking after unpacking the currency counter, store the box and packing materials for future shipping. Failure to ship the currency counter in the original box and packaging will void the warranty. Installation 1. Select an appropriate work space. Make ...
4 3. Parts description front view (1) power switch (2) stacker area (3) keyboard (4) note holder (5) hopper (6) 4-digit and 3-digit display (7) guide plate s u m + accm 0 clr sp star t man auto 1 2 3 4 5 6 7 8 9 0 (1) (2) (3) (4) (5) (6) (7) figure 1 : front side view.
75 series currency counter 5 rear view (8) interface connector (rs-232 / option) (9) external display connector (10) fuse (11) outer door (12) handle (13) thickness adjustment dial (14) voltage select switch (15) power connector (12) (11) (10) (8) (9) (13) (14) (15) figure 2 : rear side view.
6 + accm 0 clr sp start stop man auto 1 2 3 4 5 6 7 8 9 0 d u figure 5 : keyboard and display model 75ud + accm 0 clr sp start stop man auto 1 2 3 4 5 6 7 8 9 0 d figure 3 : keyboard and display model 75d + accm 0 clr sp start stop man auto 1 2 3 4 5 6 7 8 9 0 d m figure 4 : keyboard and display mod...
75 series currency counter 7 s u + accm 0 clr sp start stop man auto 1 2 3 4 5 6 7 8 9 0 figure 9 : keyboard and display model 75su s + accm 0 clr sp start stop man auto 1 2 3 4 5 6 7 8 9 0 figure 7 : keyboard and display model 75s s m + accm 0 clr sp start stop man auto 1 2 3 4 5 6 7 8 9 0 figure 8...
8 4. Operation procedure for trouble-free operation, perform the following steps in the or- der given. 1. Prepare the currency. A. Remove and discard clips, rubber bands, and tags from the notes to be counted. B. Fan each group of notes before counting as shown in figure 9, and remove the following:...
75 series currency counter 9 2. Turn the power switch to “on”. A. Be sure that the machine does the following: • the motor turns the hopper and stacker wheels. • the display reads “8888” to test all of the display segments. • each function key turns on in sequence, to show that it is operational. B....
10 4. Set any desired functions these functions may be set in any order. Numeric keys 1 2 3 4 5 6 7 8 9 0 . . . . . . . . . . . . . . . .See page .12 to preset variable batch size. Function keys density key . . . . . . . . . . . . . . . . . . . . . . . . . . . . .See page .13 to adjust for dark and ...
75 series currency counter 11 u u key (75ud/75su/75smu) . . . . . . . . . . . . . . .See page .17 to detect suspect counterfeit notes (ultra violet light). M m key (75md/75sm/75smu) . . . . . . . . . . . . . .See page .18 to detect suspected counterfeit notes (magnetic ink). Note please use the note...
12 5. Key designations this section explains each of the available function keys and set- tings, and presents the procedure for their use. 1. Numeric keys (variable batch setting keys). 1 2 3 4 5 6 7 8 9 0 you can preset a desired number of notes, from 0 through 999, to be counted in a batch before ...
75 series currency counter 13 2. Function key density key. Five different density levels are available. Currency that is light or dark colored can be counted with fewer errors by changing the density settings. Level 1: this is the most sensitive level to catch double notes which have a very similar ...
14 2. To turn off this function, press the + accm key again. The “accm” in the display will go out. When counting begins again, the display will start from zero. 0 clr clear key press key to clear the count figures on the display and reset er- rors. Sp speed key three counting speeds are available. ...
75 series currency counter 15 a. To turn the manual start mode off, press man auto key. “man” on the display goes out. B. The machine starts counting automatically when notes are placed in the hopper. Start stop start key 1. This key can only be activated when the manual start mode is on. 2. The mac...
16 s dual size detection key - 75s, 75sm, 75su, 75sum notes of different length and width can be detected with this fea- ture on. To detect different size notes: 1. Press s key. “s” appearing on the display indicates that this function is on. 2. The counting speed is automatically set at speed-2 whe...
75 series currency counter 17 note if the model 75 with dual size detection detects a note with both a different length and width, the error code “ds1” will preferentially appear on the display. U ultraviolet sensor key - 75ud, 75su, 75sum suspected counterfeit notes can be detected by ultraviolet l...
18 m magnetic detection sensor key(magnetic ink) - 75md, 75sm, 75sum suspected counterfeit notes can be detected by magnetic ink. To detect suspected counterfeit notes: 1. Press m key. When magnetic detection is in use an “m” will appear on the display. 2. When the currency counter detects a suspect...
75 series currency counter 19 6. Troubleshooting if you experience an operational error while using the currency counter, the following section will help you identify the problem and provide a possible corrective action. Should an error occur, a code will appear on the display. Refer to the error co...
20 7. Error codes when an error occurs, the machine immediately stops and pro- duces an electric “beep” while the display alternately flashes the er- ror code and count figure. The note count for the batch in which the error occurred may be inaccurate. Note to ensure an accurate count, recount the l...
75 series currency counter 21 sensor error codes error code corrective action a door bill guide assembly is not closed / close (all models) the guide plate assembly to start. B hj hopper sensor is blocked / remove the (all models) note(s) from the hopper to restart. C sj stacker sensor is blocked / ...
22 counting error codes note when a counting error code appears on the display, the last batch must be recounted. Error code corrective action hf (all models) half note detected/press clr key to restart. Ch (all models) chained notes detected/press clr key to restart. Dbl (all models) doubled notes ...
75 series currency counter 23 suspect detection codes when a suspect detection code appears on the display you can choose one of the below mentioned actions : • remove only the last note from the stacker then depress the 0 clr key and continue counting. It is not necessary to recount the entire batc...
24 operation fault fault currency counter does not power up when machine is turned on. Self-test failure. Electrical burn odors. Loud buzzing slapping or other unusual noises during operation. Corrective actions 1. Make sure that the currency counter is plugged into a wall outlet and that the power ...
75 series currency counter 25 8. Cleaning jams manually 1. Record the running and grand totals. 2. Turn the power switch off. Note turning off the currency counter clears the memory of totals. 3. Remove all notes from the hopper, stacker and inside the currency counter. Note turning off the currency...
26 9. Preventive maintenance preventive maintenance, requiring partial disassembly by service technicians, is recommended every 180 days. With heavy usage (more than one shift per day, continuous service, etc.), this service will be needed more often. To make sure the operation is as trouble-free as...
75 series currency counter 27 note recommended usage of the card is once a week for low usage machines, more frequently for higher usage machines. 1. While holding tightly onto one end of the cleaning card, insert the other end into the feed rollers (the rollers in the middle of the machine where yo...
28 internal sensor locations pull back the door which is located inside of the outer door to obtain access to the below mentioned sensors: 1 2 door outer door figure 13 : how to open the door. Urtravilet sensor magnetic sensor magnetic sensor inline sensors inline sensors count sensors figure 14 : i...
75 series currency counter 29 external sensor locations s u m + accm 0 clr sp start man auto 1 2 3 4 5 6 7 8 9 0 hopper sensor stacker sensor figure 15 : external sensor locations.
30 10. Specifications counting speed: 3 speeds: 600, 1200 & 1500 notes per minute display type: lcd 3 digit batch display 4 digit total display document size limits: 100 x 185 ~ 50 x 90 (mm) 3.95 x 7.28~1.97 x 3.54 (inches) input hopper capacity: 300 circulated notes output stacker capacity: 150 cir...
75 series currency counter 31.
Magner coprate headquaters 35 magner drive, durham, ct 06422 phone : 860. 349. 1097 • fax : 860. 349. 1257 magner international headquaters 7850 nw 146th street - suite 503 miami lakes, fl 33016 phone : 305. 826. 6388 • fax : 305. 826. 2487 ehf-00026-1 m75090199.