Summary of PR-9R
Page 1
Pr-9r remote control line amplifier.
Page 2
Important the lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons caution: to prevent the ...
Page 3: Pr-9R 3
Precautions before proceeding with the installation, please read the instructions carefully to avoid damage during operation. If you have any problems, do not hesitate to contact our sales or service department. 1. All warnings on the unit and in the operation manual should be adhered to. 2. This un...
Page 5: Pr-9R 5
Table of contents - important 2 - precautions 3 - introduction 6 - packing/unpacking 7 - placement considerations 8 - functions 9 - connections 10 - remote control 12 - troubleshooting guide 13 - care & maintenance 14 - warranty information 15 - specifications 16 pr-9r 5.
Page 6: Pr-9R 6
Introduction thank you for purchasing the magnet pr-9r. The pr-9r is a solid state line pre- amplifier, representing magnet’s goal of merging technology and convenience into one product. The full functions remote control let you comfortably control your stereo from your favorite listening chair and ...
Page 7: Pr-9R 7
Packing/unpacking 1. Carefully lift the unit out of the box. 2. Remove the foam packing material. 3. Set up the unit for use. Remember: keep all the original packing in case it is necessary to return the unit for servicing. Warning: people with back problems should not unpack this equipment without ...
Page 8: Pr-9R 8
Placement considerations 1. In a place subject to direct sunlight. 2. In a humid place. 3. In an extremely hot or cold place. 4. In a place subject to vibrations. 5. In a dusty place. 6. In a poorly ventilated place. Do not install the unit in the following location: pr-9r 8.
Page 9: Pr-9R 9
Functions 1.Power pressing the power button once on the front panel or the remote control will turn the machine on. The led on the front panel will light up when the machine in on. The pr-9r will remain in mute for approximately 10 sec after turning on to allow for component stabilization. The power...
Page 10: Pr-9R 10
Connections inputs the pr-9r has a total of 7 line level inputs. 1. Cd receives signals from a compact disc player. 2. Tuner receives signals from a tuner. 3. Laser receives signals from a laser disc player. 4. Video receives signals from a vcr audio outputs. 5. Line1 receives the signal from input ...
Page 11: Pr-9R 11
If the program source is from a vcr, then there is no output at rec (video) because the vcr player cannot play and record at the same time. Video source can only be recorded to a cassette tape player. Some audiophiles believe that the higher bandwidth of the vcr tape will reproduce higher quality au...
Page 12: Pr-9R 12
Remote control 1. Power press to turn on/off 2. Mute press once for mute, press again to resume sound. 3. Cd/tuner/laser/video/line 1/line 2/tape press to select program source. 4. L balance r press l then the balance knob will turn left, press r the knob will go right. 5. + vol - press + to increas...
Page 13: Pr-9R 13
Troubleshooting guide if the unit does not function properly please follow the instructions below. I f t h e p r ob l em s t i l l o c c u r s, p l e a s e c o n ta c t o u r s e r vi c e d e p ar tm e n t . Problem solution 1. Unit does not turn on. The led is not lit. 2. No sound. 3. No sound from...
Page 14: Pr-9R 14
Care & maintenance use a soft, dry cloth to remove dust from the cabinet. For stubborn dirt, soak the cloth in a mild detergent solution. Be sure to wring the cloth well before wiping the unit. Use a dry cloth to wipe it dry. Do not use any volatile agents such as benzine or thinner. They may damage...
Page 15: Pr-9R 15
Warranty information 1. Magnet technology corporation (hereinafter referred to as magnet) warrants to the original retail purchaser only that its product is free from defects in material and workmanship under normal use, and authorizes free service and/or parts exchange at any magnet authorized serv...
Page 16: Pr-9R 16
Specifications frequency response (20-20,000hz) +/- 0.1 db thd+noise input impedance 50k ohms maximum gain 20 db signal / noise 98 db maximum output at 1k 6vrms cross talk at 1 khz -92 db cross talk 10 khz -92 db channel separation at 1 khz -92 db channel separation at 19 khz -91 db input power ac 2...
Page 17: Note
Note ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ___________________...
Page 18: Note
Note ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ___________________...
Page 19: Note
Note ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ___________________...
Page 20
Music speaks louder than words head office show room www.Magnet.Co.Th 845/11-12 moo 2, soi chokechai 4, ladprao road., ladprao bangkok 10230, thailand tel. (662) 907-7923-5 fax. (662) 907-7919 email : info@magnet.Co.Th room b401, 4th floor, zone c central world plaza,rajdamri road, patumwan, bangkok...