Magnetek Battery Charger Instruction Sheet

P.O. Box 13615 

Milwaukee, WI 53213 

Toll-Free Phone 800.288.8178 

Toll-Free Fax 800.298.3503 

N49 W13650 Campbell Drive 

Menomonee Falls, WI 53051 

Phone 262.783.3500 

Fax 262.783.3510 

www.magnetek.com 

Instruction Sheet No. 0-CHR-03E R0 

Battery Charger

Instruction Sheet 

For Flex Transmitters 

1. 12-24 VDC Input 

4. Status LED for output “B” 

2. Charging Output “A” 

5. Charging Output “B” 

3. Status LED for output “A” 

Figure 1: Charging Unit CHR-01 

Operating Instructions 

1.  Insert the battery pack (part number BAT-01) into the transmitter. 

Figure 2: Inserting the Battery Pack 

2.  When the charging unit (part number CHR-01) is initially powered on, both LED-A and LED-B will 

blink green two or three times (indicating that the charger is in good working order) and then stop 

(indicating standby mode). 

3.  Plug the charging cable (output A or B) into the battery pack charging input slot. 

Figure 3: Plugging in the Charging Cable