Operating manual the datsuns.
Introduction congratulations on your purchase of a limited edition magnetic effects death rattle fuzz! This fuzzbox was produced with the datsuns to celebrate the release of their 5th album 'death rattle boogie'. With a circuit designed by christian livingstone for use on the 'death rattle boogie' l...
Features tone volume texture fuzz foot switch - effect on/off (true bypass) 1/4 mono input jack 1/4 output jack led - indicates effect on/off power in 9v dc note: the death rattle fuzz has a high input impedance and a low output impedance. This makes the death rattle fuzz, unlike many fuzz pedals, c...
Operating instructions connect a lead from your guitar to the input jack. Connect a lead from the output jack to your amplifier. Make sure a battery is fitted, or a 9v dc centre negative adapter is connected to the power-in socket. To change the battery remove the four screws on the back of the peda...
Operating instructions volume: controls the overall output of the pedal. Texture: alters the bias of the fuzz transistors. It is recommended to start with the texture control turned all the way to the right. In this position you will achieve the "correct" fuzz sound. As you lower the texture control...
