1. DL manuals
  2. Magni
  3. TV Converter Box
  4. MCP-601
  5. Operator's Manual

Magni MCP-601 Operator's Manual

Manual is about: MAGNICODER PREMIER MCP-601 Series DVI /VGA TO SDI SCAN CONVERTER

Summary of MCP-601

  • Page 1

    Magni systems, inc. Magni magnicoder premier mcp-601 series dvi /vga to sdi scan converter operator’s manual for the following models: mcp-601 for vga and dvi graphics, analog and sdi video mcp-601-a for vga and dvi graphics, and analog video mcp-601-d for vga and dvi graphics, and digital sdi video...

  • Page 2

    Mcp-601 operator’s manual magni systems, inc. Ii magni is a registered trademark of magni systems, inc. Magni systems, magnicoder premier, magnicoder, magniport, and flicker stabilizer are trademarks of magni systems, inc. Ibm and ibm pc at are registered trademarks of international business corpora...

  • Page 3

    Mcp-601 operator’s manual magni systems, inc. Iii fcc notice this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipme...

  • Page 4: Notes

    Mcp-601 operator’s manual magni systems, inc. Iv notes.

  • Page 5: Table Of Contents

    Mcp-601 operator’s manual magni systems, inc. V table of contents 1. About this manual.............................................................................................................9 safety precautions........................................................................................

  • Page 6

    Mcp-601 operator’s manual magni systems, inc. Vi genlock setup ...........................................................................................................................26 scan conversion ..................................................................................................

  • Page 7

    Mcp-601 operator’s manual magni systems, inc. Vii video sizing and key lockout with the size tab....................................................................... 59 video squeeze: .....................................................................................................................

  • Page 8

    Mcp-601 operator’s manual magni systems, inc. Viii b. Custom software development............................................................................................81 sending commands ..............................................................................................................

  • Page 9: 1. About This Manual

    Mcp-601 operator’s manual magni systems, inc. 9 1. About this manual this manual describes how to install, configure, and operate the magnicoder premier mcp-601 dvi/vga to sdi graphics-to-video scan converter. The information presented will help to familiarize you with all aspects of the mcp-601 and...

  • Page 10

    Mcp-601 operator’s manual magni systems, inc. 10 chassis grounding warning: the chassis is grounded through the ground conductor of the ac line cord. To prevent an electrical shock hazard, only plug the line cord into a properly grounded ac wall receptacle, as verified by a qualified technician. Pow...

  • Page 11: 2. Product Overview

    Mcp-601 operator’s manual magni systems, inc. 11 2. Product overview introduction the magnicoder premier mcp-601 is a dvi/vga-to-video scan converter with overlay and mixed effects. It lets you transform a personal computer into a professional video production system. Complete with special effects, ...

  • Page 12

    Mcp-601 operator’s manual magni systems, inc. 12 the mcp-601’s novel video/graphics split function provides a way to add graphic-based information from the computer display—such as commercial messages—to the output, while preserving the full television picture in reduced size. The input video can be...

  • Page 13

    Mcp-601 operator’s manual magni systems, inc. 13 product models mcp-601 series come in three models. Each model comes in a configuration to suit a particular facility. Mcp-601 has digital sdi-601 as well as analog composite and component video inputs and outputs. It is intended for digital/analog fa...

  • Page 14

    Mcp-601 operator’s manual magni systems, inc. 14 mcp-601 features the mcp-601 incorporates the latest in computer dvi/vga/xga/uxga-to-video conversion. Video • supports both digital and analog systems including 525/625 digital sdi-601 and y, r-y, b-y analog component, y/c, ntsc and pal standards. • ...

  • Page 15

    Mcp-601 operator’s manual magni systems, inc. 15 pan and zoom / magniport • a magniport tm graphics window within the vga screen can be positioned and scaled (up to 2x) for optimum viewing impact in the output video • pan and zoom control for scaling and positioning a specific pc graphics area that ...

  • Page 16

    Mcp-601 operator’s manual magni systems, inc. 16 front panel description figure 2-2. Mcp-601 front view the following components can be viewed from the front of the mcp-601. Indicators on when the led lit: inputs: -video: both analog and sdi outputs are available simultaneously regardless of input. ...

  • Page 17

    Mcp-601 operator’s manual magni systems, inc. 17 rear panel description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 figure 2-3. Mcp-601 rear view the following cable connectors can be viewed from the rear of the mcp-601. 1. Power entry connector and fuse holder (1 amp time delay/slow blow) wi...

  • Page 18

    Mcp-601 operator’s manual magni systems, inc. 18 3. Block diagram description fig 3.1 mcp-601 operational block diagram mcp-601 block diagram descriptions graphics input (dvi or vga) graphics input selection: the graphics input can be selected from the analog vga or the digital dvi inputs. The vga a...

  • Page 19

    Mcp-601 operator’s manual magni systems, inc. 19 video input / output analog input/ analog and sdi outputs: the analog input signal, when selected will be the analog output plus the converted sdi output. The ref in/ cpst 2 input can be selected as the second composite input in the analog input mode....

  • Page 20

    Mcp-601 operator’s manual magni systems, inc. 20 alpha key: one full frame of the graphics or the video signal can be stored in the alpha key memory. The alpha key can be set to act on the full picture as a pixel-by-pixel mix level between graphics and video..

  • Page 21: 4. Installation

    Mcp-601 operator’s manual magni systems, inc. 21 4. Installation this chapter identifies the mcp-601 components that were shipped from the factory. This chapter also describes how to install the mcp-601, connect the mcp-601 to a computer, and how to install the magni premier application software. Mc...

  • Page 22

    Mcp-601 operator’s manual magni systems, inc. 22 connecting the mcp-601 the mcp-601 comes with an installation cd-rom and the required cables that let you connect it to a computer. The installation cd-rom lets you load all the necessary initialization files and the magni premier application software...

  • Page 23

    Mcp-601 operator’s manual magni systems, inc. 23 • operate the mcp-601 from the remote ir controller. Use the menu button to access the on-screen displays. Please refer to the sections on ir controller and video output on-screen displays in this manual. • for scan conversion or down stream keying ap...

  • Page 24

    Mcp-601 operator’s manual magni systems, inc. 24 hardware installation with magni premier application software and remote ir controller continue from the procedure under hardware installation with remote ir controller only • install the magni premier application software per instructions under softw...

  • Page 25

    Mcp-601 operator’s manual magni systems, inc. 25 figure 4-3, config tab on the magni premier application software select video input: factory startup, analog • sdi 601 selects the serial digital input. Since the sdi signal has no color framing information, ref in /cpst 2 can also be selected as the ...

  • Page 26

    Mcp-601 operator’s manual magni systems, inc. 26 . Select computer input: factory startup, vga • vga selects the analog rgb input from the computer graphics card. • dvi selects the digital rgb input from the computer graphics card. Dvi input provides a digital-to-digital conversion and best keying s...

  • Page 27

    Mcp-601 operator’s manual magni systems, inc. 27 2. With an input signal selected, either a sdi or an analog signal, the scan converted output signals will be genlock to this incoming signal. Loss of incoming signal will revert the genlock source to the internal clock. In this mode, to have 100 % gr...

  • Page 28

    Mcp-601 operator’s manual magni systems, inc. 28 genlock bandwidth genlock filter mode selection also affects the output bandwidth of the incoming analog video signal. However, it has no effect on the sdi digital signal. There are three filter modes: broadcast relatively stable and full bandwidth st...

  • Page 29

    Mcp-601 operator’s manual magni systems, inc. 29 typical application and genlock settings table 4-2, recommended mcp-601 applications and genlock settings application video input genlock source genlock led chroma phase of composite analog output default memory location internal clock (1) off sc/h ze...

  • Page 30

    Mcp-601 operator’s manual magni systems, inc. 30 setting up vga input graphics resolution detection the mcp-601 features auto-detection and auto-positioning of the graphics display. The unit continuously measures the horizontal and vertical sync frequencies looking for any changes. As long as there ...

  • Page 31

    Mcp-601 operator’s manual magni systems, inc. 31 setting up vga / video pixel-to-pixel encoding mode the mcp-601 internally processes video and graphics signals in the ccir 601 signal domain, where the native resolutions are dictated by the television h and v resolutions; 720x480 for ntsc/525 system...

  • Page 32

    Mcp-601 operator’s manual magni systems, inc. 32 key:edge soft (to get rid of the bleed through edges when keying, key filter is on) key:width wide (no clipping of the graphics edges when keying) case # 3: in 800x600 vga resolution, the commands that need to be sent to the mcp are as follows: pos:co...

  • Page 33

    Mcp-601 operator’s manual magni systems, inc. 33 video cards that support 720x480 vga screens (ntsc) the 720x480 vga mode is not a standard vga setting. However, it provides the best full screen vga to video conversion. To utilize the 720x480 vga display, the user has to input custom vga information...

  • Page 34

    Mcp-601 operator’s manual magni systems, inc. 34 video cards that support 720x576 vga screens (pal) the 720x576 vga mode is not a standard vga setting. However, it provides the best full screen vga to video conversion. To utilize the 720x576 vga display, the user have to input custom vga information...

  • Page 35

    Mcp-601 operator’s manual magni systems, inc. 35 setting up keying configuration – magni premier key tab figure 4-6, magni premier software key tab screen • select the key edge filter; hard or soft. Hard key mode provides a sharp transition between graphics and video while soft key mode lengthens th...

  • Page 36

    Mcp-601 operator’s manual magni systems, inc. 36 3. Or click on the number area in the select key color box, enter number and press return. Press send color button to set key color. • alpha key is loaded by selecting alpha graphics to load from graphics input or alpha video to load from the selected...

  • Page 37

    Mcp-601 operator’s manual magni systems, inc. 37 key edge filter, • two modes, hard or soft. • soft, reduces motion artifacts on keyed graphics. • hard, provides sharpest key on anti-alias and custom graphics. Key width, • there are two key signal widths; narrow and wide • wide, reduces halo of sele...

  • Page 38: 5. Basic Operations

    Mcp-601 operator’s manual magni systems, inc. 38 5. Basic operations controlling the mcp-601 the mcp-601 can be controlled by one of four ways: • with the supplied mcp-601-ir handheld ir remote controller. • with the supplied magni premier application software (recommended for initial and quick setu...

  • Page 39

    Mcp-601 operator’s manual magni systems, inc. 39 figure 5-1, magni premier software in the mix tab screen the magni premier program detects the vga resolution automatically. If the vga screen resolution is not detected properly, manually pressing autoset button on the ir controller. (the vga desktop...

  • Page 40

    Mcp-601 operator’s manual magni systems, inc. 40 keying operation and timing setup --- magni premier key tab figure 5-2, magni premier software key tab screen • key edge filter; hard key mode provides a sharp transition between graphics and video soft key mode lengthens the transition time thus redu...

  • Page 41

    Mcp-601 operator’s manual magni systems, inc. 41 1. Click on get key button to select color on the existing vga screen. Then click on a large color area on the desktop (the y, u, v values should change). 2. Or click on set color button to select a color from a pallet. 3. Or click on the number area ...

  • Page 42

    Mcp-601 operator’s manual magni systems, inc. 42 • the key lockout box allows setting the key lockout areas (100% video pass through) in all four sides within the output video. The center area denotes the key enable area. Its four sides are adjustable by dragging each side with the mouse pointer. Do...

  • Page 43

    Mcp-601 operator’s manual magni systems, inc. 43 factory preset default memories (mcp-601) table 5-1a factory preset default memories 1 video input graphics genlock video output key 8 mix function location setting resizer input resizer source format standard 6 type color graphics/video scan conversi...

  • Page 44

    Mcp-601 operator’s manual magni systems, inc. 44 factory preset default memories (mcp-601-a) table 5-1b factory preset default memories 1 video input graphics genlock video output key 8 mix function location setting resizer input resizer source format standard 6 type color graphics/video scan conver...

  • Page 45

    Mcp-601 operator’s manual magni systems, inc. 45 factory preset default memories (mcp-601-d) table 5-1c factory preset default memories 1 video input graphics genlock video output key 8 mix function location setting resizer input resizer source format standard 6 type color graphics/video scan conver...

  • Page 46: 6. Ir Remote Controller

    Mcp-601 operator’s manual magni systems, inc. 46 6. Ir remote controller the ir remote controller is the most convenient way to control the mcp-601 scan converter. Most of the functions are similar to the one controlled by the magni premier application software. The ir controller acts as the operati...

  • Page 47

    Mcp-601 operator’s manual magni systems, inc. 47 graphics section of ir controller for graphics input, select dvi or vga, autoset function automatically locks the mcp-601 to the vga/dvi resolution of the computer. (the vga desktop color may need to be set to blue when doing the autoset for some vga ...

  • Page 48

    Mcp-601 operator’s manual magni systems, inc. 48 fig. 6-2 preprogrammed vga magni port (selection from ir controller) 1 size 1. Upper left corner size 2. Center size 3. Upper left corner size 4. Center size 5. Center size 6. Center size 7. Center size 8. Center size 9. 100% full size of the vga scre...

  • Page 49

    Mcp-601 operator’s manual magni systems, inc. 49 video section of ir controller for video input, select one of the five inputs; sdi, cpst (composite), cpnt (y,b-y, r-y or yuv component), y/c (two wires component) or cpst 2 (second composite input) as the video overlay source and/or as genlock input....

  • Page 50

    Mcp-601 operator’s manual magni systems, inc. 50 fig. 6.3 preprogrammed video squeeze sizes and their position (selection from ir controller) 1 (1) 6.25% of original, upper left corner (2) 6.25% of the original, center (3) 25% of original, upper left corner (4) 25% of original, center (5) 56% of ori...

  • Page 51

    Mcp-601 operator’s manual magni systems, inc. 51 memorize the new video size and position all video effect, size and position settings can be stored by invoke the memory function of the ir controller. Refer to the memory save and recall section in the users manual. Arrow section of ir controller up/...

  • Page 52

    Mcp-601 operator’s manual magni systems, inc. 52 video output on-screen displays menu on-screen display the menu operation can be accessed with the magni ir remote controller or by pressing the mcp 601 ir button under the config tab of the magni premier application software. To view the on –screen m...

  • Page 53

    Mcp-601 operator’s manual magni systems, inc. 53 horizontal horizontal filtering off no filtering on ¾ to ¼ weighting per data sample • vga only: all analog vga modes (user, vga, svga, xvga, sxvga, uxga) autopos now: mcp-601 sets the position of graphic relative to the blue graphics size. Autopos en...

  • Page 54

    Mcp-601 operator’s manual magni systems, inc. 54 • analog input this is the analog input graphics conversion, or key and video overlay mode. Sdi and analog outputs are always genlock to the selected analog input. Genlock bandwidth: select analog input bandwidth and genlock filter mode: broadcast* se...

  • Page 55

    Mcp-601 operator’s manual magni systems, inc. 55 cal (calibration) on-screen display cal (access from the cal button on the ir remote controller or from the magni premier application software)) caution: it is recommended that the user fully understand the operation of the product and aware of the co...

  • Page 56

    Mcp-601 operator’s manual magni systems, inc. 56 5060 graphics dvi rgb black level rgb contrast rgb brightness vga rgb black level rgb contrast rgb brightness system vco system vco (frequency) key offset print all cal consts (calibration constants) store all constants* * caution: do not store change...

  • Page 57

    Mcp-601 operator’s manual magni systems, inc. 57 7. Magni premier application software the magni premier application software is provided with the product to provide initial setup, quick setup and pc control of the unit. The application software can be setup to be displayed on a second monitor in a ...

  • Page 58

    Mcp-601 operator’s manual magni systems, inc. 58 screen. Follow the instructions under the save configuration memories screen to save or recall a memory. Figure 7-2, save configuration screen by pressing the save memories button memories can only be reset to factory default settings in two ways: 1) ...

  • Page 59

    Mcp-601 operator’s manual magni systems, inc. 59 video sizing and key lockout with the size tab the key lockout (100% video pass through) area is defined as area outside of the center rectangular area. The four sides of the center rectangle (key enable area) are adjustable by dragging each side with...

  • Page 60

    Mcp-601 operator’s manual magni systems, inc. 60 vga sizing, magniport and underscan modes video and graphics mix controls within the mix tab. The key button activates the key operation specify by the parameters setup under the key tab. The freeze button will freeze the scan converted vga graphics o...

  • Page 61

    Mcp-601 operator’s manual magni systems, inc. 61 key type selection refer to magni premier key tab – setting up keying configurations in section 4. Installation. Figure 7-8, key type selection under the key tab screen of the magni premier software expanded key color selection the color pallet select...

  • Page 62: 8. Fx-1 Effects Controller

    Mcp-601 operator’s manual magni systems, inc. 62 8. Fx-1 effects controller the fx-1 controller lets you remotely control the mcp-601’s cut, fade/mix, key, freeze, and memory features. The mix slider provides the convenient way to control the mix level between graphics and video. The fx-1 controller...

  • Page 63

    Mcp-601 operator’s manual magni systems, inc. 63 • cut pressing the top two buttons at the same time lets you toggle between full video and the mix level. A green indicator (mix or video) displays the selected output mode. • fade pressing the second button controls the time varying mix between video...

  • Page 64: 9. Applications

    Mcp-601 operator’s manual magni systems, inc. 64 9. Applications typical applications and their respective settings there are many applications for the mcp-601 series product. Scan conversion, sdi video encoding, downstream keying and internal keying and overlay are the more common ones. Following a...

  • Page 65

    Mcp-601 operator’s manual magni systems, inc. 65 typical application’s wiring diagrams and setups video overlay fig. 9-1 video overlay with dvi graphics and sdi-601 video inputs fig. 9-2 video overlay with dvi graphics and analog video inputs.

  • Page 66

    Mcp-601 operator’s manual magni systems, inc. 66 video overlay fig. 9-3 video overlay with vga graphics and analog video inputs note: (1) sdi 601 input can also be used in lieu of the analog video input in fig. 9-3. (2) mcp-601 provides two sdi outputs and one analog output simultaneously. The analo...

  • Page 67

    Mcp-601 operator’s manual magni systems, inc. 67 alpha key video overlay fig. 9-4 alpha key video overlay with dvi or vga graphics and sdi 601 video inputs fig. 9-5 alpha key video overlay with dvi graphics and analog video inputs.

  • Page 68

    Mcp-601 operator’s manual magni systems, inc. 68 scan conversions fig. 9-6 scan conversion of dvi graphics input to sdi and analog video outputs fig. 9-7 scan conversion of vga graphics input to sdi and analog video outputs.

  • Page 69

    Mcp-601 operator’s manual magni systems, inc. 69 scan conversion with down-stream keying fig. 9-8 scan conversion of dvi graphics to sdi video output with down-stream keying in external digital switcher. Fig. 9-9 scan conversion of vga graphics to analog video output with down-stream keying in exter...

  • Page 70: Questions

    Mcp-601 operator’s manual magni systems, inc. 70 10. Technical tips and frequently asked questions setup and configuration: no color : • check video format setting under configuration tab. Restoring factory settings : • the factory settings of the memories can be restored through the menus on mcp-60...

  • Page 71

    Mcp-601 operator’s manual magni systems, inc. 71 fx-1 remote control operation : • the memory button cycles through the memories 1 to 5 and the key led flashes when memory 1 is recalled. Frequently asked questions: q will the mcp-601 output a 100% full screen dvi /vga display? The mcp-601 will conve...

  • Page 72

    Mcp-601 operator’s manual magni systems, inc. 72 location on the screen. Once you set up the desire size and position, you can memorize these settings by executing the memory save and recall function by assigning a memory location (1-10). Nine preprogrammed video squeeze sizes and positions can be a...

  • Page 73: 11. Specifications

    Mcp-601 operator’s manual magni systems, inc. 73 11. Specifications electrical computer graphics input for scan conversion graphics formats digital visual interface (dvi) and video graphics adapter (vga) graphics input dvi vga switchable dvi digital or rgb analog (vga) one dvi-i female (digital) con...

  • Page 74

    Mcp-601 operator’s manual magni systems, inc. 74 genlock scan-conversion with internal overlay genlock to selected video input source. Scan-conversion with or without external key genlock to composite or cpst2/ ref in loop through input, 75 Ω bnc. Applicable signals are black burst, or composite nts...

  • Page 75

    Mcp-601 operator’s manual magni systems, inc. 75 keying key modes internal key or external key external key has h and sc phasing adjustments. Key type color black standard transparent (plus standard key) graphics graphics mixed with video in following forms: key on graphics rgb component value set a...

  • Page 76

    Mcp-601 operator’s manual magni systems, inc. 76 analog video output composite video component y, u, v or y, b-y, r-y luminance amplitude ± 2% ± 2% b-y, r-y (u,v) n/a ± 2% hue ± 3 ° n/a color saturation ± 3% n/a differential gain ± 2% n/a sync (relative to blanking) -286 mv ± 5% (ntsc) -300 mv ± 5% ...

  • Page 77

    Mcp-601 operator’s manual magni systems, inc. 77 miscellaneous calibration software controlled (no internal adjustments required) line voltage 90 to 250 vac, 50 to 60 hz power consumption 500ma (max current), 45 w (max power) emi fcc certified to meet fcc class a computing device. Ce marking conform...

  • Page 78

    Mcp-601 operator’s manual magni systems, inc. 78 mechanical rear panel connectors power ac main connector 75 Ω bncs video inputs cpst2 (composite 2) ref (reference in/out) video outputs key outputs (2) sdi-601 (1) and analog video cpst/y; c/b-y; r-y (3) second composite video input with loop thru ou...

  • Page 79: 12. Appendix

    Mcp-601 operator’s manual magni systems, inc. 79 12. Appendix a. Connector pin-outs this chapter identifies and describes the connector pin outs on the mcp-601. Dvi connector pin description pin description pin description 1 t.M.D.S. Data2- 9 t.M.D.S. Data1- 17 t.M.D.S. Data0- 2 t.M.D.S. Data2+ 10 t...

  • Page 80

    Mcp-601 operator’s manual magni systems, inc. 80 vga connectors (15-pin sub d) pin description pin description pin description 1 red 6 ground 11 monitor id bit 0 2 green 7 ground 12 monitor id bit 1 3 blue 8 ground 13 horizontal sync 4 monitor id bit 2 9 not used 14 vertical sync 5 not used 10 groun...

  • Page 81

    Mcp-601 operator’s manual magni systems, inc. 81 b. Custom software development dll files and software development kits (sdk) are available to assist oem customers in development of custom control software. However, dll files are not necessary for the experience developer because the commands are si...

  • Page 82

    Mcp-601 operator’s manual magni systems, inc. 82 c. List of commands and control codes this section is provided for the experience software programmers only that have knowledge of the rs232/usb interfaces using commands and queries. You transmit commands to the mcp-601 using the enhanced american st...

  • Page 83

    Mcp-601 operator’s manual magni systems, inc. 83 d. Firmware update the firmware of the mcp-601 can be updated to the most current codes by using a pc computer acting as a hyper terminal in conjunction with the magni fx-1 controller connected to the mcp-601. Follow the procedure that follows to upda...

  • Page 84

    Mcp-601 operator’s manual magni systems, inc. 84 5. At this point, select the “browse” button. 6. Then locate the appropriate file to send. 7. On completion of the file transfer the mcp601 will refresh the menu to allow for another file transfer. 8. Repeat set 2 to 7 for additional file transfer. On...

  • Page 85

    Mcp-601 operator’s manual magni systems, inc. 85 9. When the mcp601 powers backup again, type in on the terminal screen: (configure to pal defaults) memory:default pal all (configure to ntsc defaults) memory:default ntsc all once done, close hyper-term..

  • Page 86: Warranty

    Mcp-601 operator’s manual magni systems, inc. 86 warranty all products manufactured by magni systems, inc. ("magni”) are warranted against defects in materials and workmanship for a period of 12 months from the date of original shipment from magni's factory. If defects appear during the warranty per...

  • Page 87: Index

    Mcp-601 operator’s manual magni systems, inc. 87 index 100% full screen, 19, 71 720x480 vga screens (ntsc), 33 720x576 vga screens (pal), 34 about this manual, 9 alpha key, 20, 41 analog video, 27, 78 appendix, 37, 79 applications, 64 control codes, 82 downstream keying, 64 external keying, 64 inter...

  • Page 88

    Mcp-601 operator’s manual magni systems, inc. 88 magni premier application software, 11, 12, 15, 19, 21, 22, 24, 26, 27, 30, 31, 32, 36, 37, 38, 46, 52, 55, 57, 64, 70, 72, 74 config tab, 42 key tab, 40 mix tab, 38 size tab, 41 magniport, 14, 15, 19, 31, 38, 43, 44, 45, 47, 60, 70, 71, 72, 73, 74 gr...

  • Page 89

    Mcp-601 operator’s manual magni systems, inc. 89 user display setting, 33, 34 vga input, 14, 16, 17, 18, 22, 30, 53, 70, 73 vga monitor, 15, 17, 22, 52, 70 video input, 13, 16, 35, 40, 41, 65, 66, 67, 75, 78 video key, 70, 74 video output, 13, 29, 58, 73, 78 video overlay, 13, 66 video pixel-to-pixe...

  • Page 90

    Mcp-601 operator’s manual magni systems, inc. 90 calibration values (specific for this unit only) the factory calibration values printout sheet is attached on the following page(s). These values (cal constants) are unique to this particular unit. If for some reasons that your unit has gone out of ca...